STOP 0X00000024 - Wont Get Past The Blue Screen
Jan 9, 2009
STOP: 0X00000024 (0X001902FA, 0XF7B2680C, 0XF7B2650C, 0X6F0AB6BD) This is the blue screen i get when i disable restart on errors. I've replaced the hard drive and even swapped it with a good drive with xp loaded....still the same error. I've tried running the restore disk...same thing. Bios loads properly and detects everything it needs too. Just after the bios i get a chioce window that says your computer stoped responding for what ever reason, blah blah blah. It allows me 5 choice, safemode, safemode networking, safemode cmd, last known good config and normally. If i choose any of them then immediatly hit F8 i get the rest of the options for boot up. Every choice ends the same way froim debug mode to safe mode. After you make your selection you get to the windows loading screen. About 2-3 seconds into it the computer goes into a rolling restart mode.
View 12 Replies
ADVERTISEMENT
Jul 30, 2010
i installed a new printer hp laserjet 4015 from the installation cd. previously 2015 version was installed. the installation went ok and the printing was also ok. system was shutdown normally. the next work day the system rebooted after the login was entered. this was solved by choosing 'last know good configuration' option of startup. however on re starting the same issued erupts. the system xp sp2 boots only when the last know good config option is chosen. the blue screen when opted for shows this error stop: 0x00000024 (0x001902fe, 0xf7a76854, 0xf7a76650, 0xa2c83692)
View 4 Replies
View Related
Sep 5, 2009
I plugged my blackeberry into my computer - it has a new battery, though I don't know why that made a difference - and my computer crashed immediately. After the intel screen it brought me to a black screen with choice to reboot in safe mode, etc. No matter what option I chose, I was unsuccessful - just kept coming back to that screen. After troubleshooting I found my way to the blue screen with the error message stop: 0x00000024 (0x00190203, 0x8AFFA800, 0xc0000102, 0x00000000) and that I should disable virus protection etc. I inserted my xp disc but don't know how to get the system to boot from that.
View 14 Replies
View Related
Oct 2, 2009
i shut down while pc was running chkdsk (yes, I now know how stupid that was). I rebooted and that brought me to the blue screen that I have not been able to get past yet. Message reads: stop:0x00000024(0x00190203, 0x83160AB0, 0xC0000102, 0x00000000) I was able to change setup to get it to reboot from the cd drive and used the XP Diagnostics CD to run diagnostics. I ran the diagnostics for blue screen and hard drive errors - all tests passed. (This took several hours). I then tried to reboot from hard drive and got the same blue screen again. i then put in the Windows XP startup disk and came to the recovery console. Here I get a prompt I've never seen before: 1:J:minint
View 11 Replies
View Related
Apr 2, 2010
This is at the blue screen I get and I cannot get onto my computer. When you turn the computer on you get a black screen with the options
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration
Start Windows Normally
If I choose any of those my computer goes to a blue screen with the code: ***Stop : 0x00000024 (0x00190203, 0x8AD0ADE8, OxC0000102, 0x00000000)
View 8 Replies
View Related
Oct 2, 2007
It was initially having problems loading her desktop and profile, sometimes rebooting itself several times after the log-in before successfully starting windows. I attempted to export the registry this morning in regedit and as soon as it started, it rebooted. Now it always gives a stop screen no matter what start up option I try stop: 0x00000024 (0x001902fe, 0xf89b16dc, 0xf89b13d8, 0xf8171f81) ntfs.sys - address f8171f81 base at f8122000, datestamp 41107eea
I downloaded the microsoft startup disks and even booting with all of them, when I type r for the recovery console it takes me right to the same blue screen. From what I've read it seems like chkdsk might fix things but I cannot get a command prompt. Perhaps the Maxtor harddrive is failing and I downloaded Seagate diagnostics for DOS because their windows version isn't going to help me since I can't start that. I booted off the disk and get a screen full of mostly general info but then it tells me the command interpreter is not found and wants me to give it the full path for command.com. It can't recognize anything I try to type here but I don't know what syntax to even use here. If I can come up with an ASR disk from another XP Pro PC, I'm wondering would running the automated system restore found on the first microsoft disk be an option? Is there any other way to get to run chkdsk because I can't even get into recovery console?
View 5 Replies
View Related
May 22, 2010
I read previous threads. My problem(s): Hard drive checks out. Problem started with "unable to defrag due to system files..." Found what I thought was problem software, tried to remove it, it froze up, I attempted to cancel it, I shut computer down. Start up gave 0X00000024 (0X00190292, 0XBA4D9840,0XBA4D953C, 0X804EF920). I tried booting from Windows CD. When I tried to get recovery console, it asked for admin. password. I don't remember ever setting one. I attempted to recover or reset by methods on "tweaking with Vishal". Didn't work.
View 12 Replies
View Related
Oct 25, 2007
My friend got a blue screen with error message saying; A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time. Technical information: *** STOP: 0x00000024 (0x00190203,0x82346610, 0xc0000102, 0x00000000)
She can't get into windows at all. When I turn on her computer it goes to a black screen that gives me a choice to boot in safe mode, safe mode with command prompt, last known good configuration. It is Windows XP Dell Laptop. I've tried them all, everytime it just goes straight to the same Blue Screen with same message.
She doesnt have a recovery cd with her.
View 14 Replies
View Related
Apr 1, 2006
I turned on my PC this morning to find it would restart after the Windows Loading screen and give me the list of safe mode, etc. I went into safe mode but it done the same. This is also the case for all of the other options, including last configuration. The previous night I received a BSOD (Blue screen of death) and there was a count up showing memory dump to hard drive. I read the instructions and as it said it was my first event and so I restart. However, I did restart when the counter was at around 34. Im guessing thats really a % and I should have waited until 100%?
View 3 Replies
View Related
Nov 13, 2009
I've got a Lenovo ThinkPad laptop that won't get past the blue screen of death. If i choose to start up on last know good config this is the blue screen i get:If i choose to start up in safe mode i get this screen first.
View 14 Replies
View Related
May 1, 2005
A friend of mine has a year old computer 2.4ghz running XP Pro.Recently the computer had gotten slower and slower and had lots of Popups. Sypbot found 127 bogus things going on.It could not clear all of them.We went into control panel and removed programs and took out a bunch of things that were not operating related programs.Computer was rebooted multiple times. Finally the computer just hangs when it gets to the blue XP screen, and will sit there for hours until rebooted.I have tried ever mode of Safe Mode to boot and I get the same blue XP screen. The mouse can still be moved around.I cannot boot from the CD rom with the XP disks and do not have bootable floppies. I cannot get into the setup screen to change the order of boot.Since this computer was a gift to the person, we do not know the administrator password.
View 9 Replies
View Related
Jul 8, 2008
I have a dell Dimension 4600, which has given me so many problems throughout the years. When we got it, the thing ran great. This was a few years ago... A year or two ago the thing got a NASTY Virus, and ever since then it hasn't worked because of hardware and software problems. I pretty much decided to give up at that point and the thing has been sitting around collecting dust.My dad thought it was the memory, and so today I carted the computer up into my room, set it up and put in a new memory card. It didn't help, My computer goes in circles when trying to boot up, until the blue screen pops up.
It cannot boot from the hard drive, and I get the message "press F1 to retry boot, F2 for setup utility"
F2 takes me to the utility, but as far as I know I don't want to change anything here at the moment.
if I press F1 it pops up the same message.
So I tried Booting from the CD and Reinstalling from the CD. Neither worked and both of these result in the Blue screen of death. For the install, the blue screen would come up at the third bullet point which I believe is "preparing installation."
***STOP: 0x0000000A (0xCDCDCDCD, 0x00000002, 0x00000001, 0x807d600f)
WhenI continue the current upgrade I get "IRQL_NOT_LESS_OR_EQUAL"
the Tech info is:
***STOP: 0x0000000A (0x0a130013, 0x00000002, 0x00000000, 0x807d5ff9)
I am getting a few other blue screens but I don't know what the say, But as far as I know, everything I have tried has lead to some form of Blue Death screen. Any Ideas on how I can get this puppy to work?I also tried to boot from my Laptops CD but it didn't work so its not the CD that is the problem.
View 14 Replies
View Related
Jul 31, 2007
All of a sudden my HP notebook started to give the following message while starting, I am getting the following error message: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to to check for hard drive corruption, and then restart your computer. Technical information: *** STOP: 0x00000024 (0x00190203, 0x8239B008, 0xC0000102, 0x00000000)."
When I restart my computer, Windows tries to load, but I get the screen where I choose whether to start in Safe Mode, Safe Mode with Command Prompt, Last Known Good Configuration, or Start Windows Normally. I have tried to start all ways, and each time return to the 1st error message (above). I can not get to a prompt to run a CHKDSK, and am lost in what to try next.
View 5 Replies
View Related
Jan 3, 2009
computer has a BSoD, Stop error 0x00000024. Many of the guides on the Internet told me to run " chkdsk drive: /f " in Cmd. The problem is that I CANT go past the BSoD to access Cmd, even in safe mode. It is a Windows XP Home Edition.
View 2 Replies
View Related
Jan 9, 2009
The computer I am working on is a Compaq Presario SR1020NX running Windows XP Home Edition. It connects to the internet via a Linksys WMP54G adapter. It tried to install Windows XP SP3 and it failed. While the update was trying to work correcting the changes it made it froze so my b/f powered it off. It rebooted just fine and he was on the internet for a little bit and then it stopped working. We recycled the modem and the router, I reset everything. Tried to uninstall and reinstall the adapter and nothing worked. I contacted Linksys and we tried to use WZC to connect to no avail. After troubleshooting a little more we determined that it had to do with the updates that were just installed on the pc. The tech suggested removing all the updates that were just installed and try again. I tried...but that is where everything went heywire. I uninstalled the first update and rebooted.....then got a blue screen flash up that said autochk program not found - skipping autocheck and then went to an endless boot cycle. I couldn't boot in safe mode, tried last known good config and nothing worked.
View 2 Replies
View Related
Oct 11, 2010
We are running Windows XP Professional SP3 on an HP Pavilion D4100Y. After a recent Windows Update, the computer was completing the update installation before shutting down, when the surge protector was accidentally turned off before the computer was finished with the updates. Now, when the computer powers up, it goes to the Windows XP splash screen, flashes blue for a quick second and the computer reboots.
If we access the Boot Menu, the Safe Mode, Safe Mode with Networking, Safe Mode with Command Prompt, Enable VGA Mode, Last Known Good Configuration options all lead to the OS Choices menu, which gives "Windows XP Professional" and "Windows Recovery Console" options. Both options reboot the computer. Only the Disable Automatic Restart option doesn't reboot the computer, and it gives a BSOD with STOP error 0x00000024........
View 19 Replies
View Related
Apr 27, 2007
*** STOP: 0X00000024 (0X00190203, 0X82ECA898, 0X0000102, 0X00000000) This is the blue screen i get when i disable restart on errors. For what ever reason i cannot access this Hard Drive. Bios loads properly and detects everything it needs too. Just after the bios i get a chioce window that says your computer stoped responding for what ever reason, blah blah blah. It allows me 5 choice, safemode, safemode networking, safemode cmd, last known good config and normally. If i choose any of them then immediatly hit F8 i get the rest of the options for boot up. Every choice ends the same way froim debug mode to safe mode. After you make your selection you get to the windows loading screen. About 2-3 seconds into it the computer goes into a rolling restart mode............
View 8 Replies
View Related
Jun 21, 2007
Multiple computers blue screen on him lately. the 4th BSoD-laden computer, but it's got me and the Sys Admin pretty stumped, so maybe I can find an answer here. The computer is a CSI brand with AMD Athlon XP proc & Windows XP. The problem hdd is a WD 400, and we also have another working WD 400 in another computer that I'll mention later. Both have Windows XP Pro SP2 installed and were originally in separate computers (each was the only harddrive in its comp originally.
Trying to start a computer with the problem WD 400 alone results in a blue screen error right after the windows screen (if I remember correctly...it's not long after the hdd, etc is recognized anyways), and gives the STOP error 0x00000024, and mentions some problems with the NTFS. I found that the ..24 STOP error has to do with the NTFS.sys file, but that doesn't help me much. The computer does not let me do anything after this BSoD error, and upon restart, I just get the same error, no matter which Safe/etc mode I try...it doesnt load into any of the modes.
View 7 Replies
View Related
Mar 7, 2010
i was registering spyware doctor (pirately) but when i registered it required to reboot
then the problem started when i got the blue bar of windows xp moving then suddenly my pc restared itself then whenever it comes to the blue bar it gets restarted. and also i tried to make a windows MS DOS startup disk but it won't help i also uninstalled Spyware Doctor and quick heal internet security ( i did this in the directory services repair mode) i also performed chkdsk/:f
now when the pc starts it comes to the blue bar and suddenly a blue screen appears and it says STOP 0x00000024 (0x001902FE, 0xF7A5747C, 0xF7A57178, 0x84469889)
View 1 Replies
View Related
Jul 25, 2009
This is what it shows me when I turn on the computer and windows tried to load: "A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you�ve seen this stop error screen, restart your computer. If this screen appears again follow these steps: Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check your hard drive configuration, and check for any updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer. Technical information: *** STOP: 0X00000024 and a bunch of other numbers and letters..............
View 4 Replies
View Related
Aug 9, 2010
A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you seen this stop error screen, restart your computer. If this screen appears again follow these steps: Disable or uninstall any anti-virsus, disk defragmentation or back up utilities. Check your hard drive configeration, and check for any updated drivers. Run CHDSK/ F to check for hard drive corrpution, and then restart your computer. Technical Informtion: *** STOP: 0X00000024 (0X00190203, 0X86F3B848, 0XC0000102, 0X00000000)
It said all of this. I cant uninstall anything because this error comes up right after it says windows. I already tried safe mode, start from the best mode where it work and etc. It is not workin. i already tried the F8 steps, tht did not work either. and i dnt knw wat they are tlkin about when they say run CHDSK/ F. ummm yea so i need alot of help. Hopefully someone can walk me through of how to fix this. And also i do not have the window xp installtion cd or disk. I was wondering where u get tht from because when i was lookin up how u fix this problem most said u need this cd. So pretty much the basic of my problem is tht i have the BSOD and it is 0x00000024 error and i can not log on or even get to the log on part.
View 2 Replies
View Related
Oct 5, 2010
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
View 7 Replies
View Related
Apr 7, 2006
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
View 4 Replies
View Related
Jul 27, 2008
I got the blue screen error code stop: c0000218 have no idea what this means.
View 1 Replies
View Related
Sep 7, 2005
I occasionally get a stop message and blue screen. It happens randomly, sometimes I am just on my desktop with no programs running. Here are some details:
STOP: 0x000000D1 (0x00000008, 0x00000002, 0x00000000, 0xF3C70140) atinyvxx.sys - Address F3C70140 base at F3C52000, Date Stamp 41f70216
View 4 Replies
View Related
Nov 5, 2008
I've been having some issues with the DRIVER_IRQL_NOT_LESS_OR_EQUAL_TO_ZERO (0x000000d1) as well as IRQL_NOT_LESS_OR_EQUAL (0x0000000A)and STOP: 0x1000008e and 0x1000007f.I'm crashing only while playing games. The crashes seem to occur more often if I'm playing a game while running something else such as streaming a podcast. The crashes are also occuring with greater frequency with each day that passes. I reformatted after these started happening, and i replaced my RAM as well, as that seemed the most likely culprit.
View 14 Replies
View Related
Jun 28, 2005
I have borrowed a school computer for the summer, it runs XP. Today, when I booted it up, it displayed a blue screen with a stop message. "c0000135 <unable to locate component> winsrv was not found. I have spent the afternoon searching for a way to fix this, but all the windows help sites require you to download stuff, and since I can't get the OS to actually turn on, I obviously can't log on to a website.
View 4 Replies
View Related
Jun 25, 2010
I'm working on an HP 530 and when I boot up, it blue screens with a stop code.The code is 0x0000007B So far, I have attempted F8 w/o success, tested and swapped the RAM, and run checks on the Hard Disk.G-Parted can see and partition the Hard disk , but Windows Repair disk can't see the Hard Disk.I have re-imaged this unit and it completed successfully, but when I rebooted, it BSOD'd again.There is nothing in the BIOS to change it to IDE from SATA and the self-test is reporting no errors.
View 12 Replies
View Related
May 27, 2006
The Technical Information is this: *** STOP: 0x0000008E (0xC0000005, 0x00000000, 0xF2F22A50, 0x00000000) I'm getting tired of this happening every day.
View 14 Replies
View Related
Aug 29, 2008
Four or five months ago I installed a new HD in my Dell Inpiron 700m laptop. I used Acronis True Image, as I've done previously with my Latitude. Initially, I had some trouble, because apparantly one or two drivers were missing. I found a discussion about this online and ran through the steps to fix the problem and everything seemed fine. A couple days after the installation I received the blue stop error screen for the first time. Restarted the computer and hadn't had it appear again until last week. The other night, it was coming up every five minutes, shutting down the computer.
View 24 Replies
View Related
Jul 24, 2006
well i just installed trial version of webroot spysweeper and then i go on to TSG then my computer goes all blue and it says things about dumping files on disk or something
View 3 Replies
View Related
