Blue Screen Error Durring Installation . Virus Problems In Past.
Jul 8, 2008
I have a dell Dimension 4600, which has given me so many problems throughout the years. When we got it, the thing ran great. This was a few years ago... A year or two ago the thing got a NASTY Virus, and ever since then it hasn't worked because of hardware and software problems. I pretty much decided to give up at that point and the thing has been sitting around collecting dust.My dad thought it was the memory, and so today I carted the computer up into my room, set it up and put in a new memory card. It didn't help, My computer goes in circles when trying to boot up, until the blue screen pops up.
It cannot boot from the hard drive, and I get the message "press F1 to retry boot, F2 for setup utility"
F2 takes me to the utility, but as far as I know I don't want to change anything here at the moment.
if I press F1 it pops up the same message.
So I tried Booting from the CD and Reinstalling from the CD. Neither worked and both of these result in the Blue screen of death. For the install, the blue screen would come up at the third bullet point which I believe is "preparing installation."
***STOP: 0x0000000A (0xCDCDCDCD, 0x00000002, 0x00000001, 0x807d600f)
WhenI continue the current upgrade I get "IRQL_NOT_LESS_OR_EQUAL"
the Tech info is:
***STOP: 0x0000000A (0x0a130013, 0x00000002, 0x00000000, 0x807d5ff9)
I am getting a few other blue screens but I don't know what the say, But as far as I know, everything I have tried has lead to some form of Blue Death screen. Any Ideas on how I can get this puppy to work?I also tried to boot from my Laptops CD but it didn't work so its not the CD that is the problem.
View 14 Replies
ADVERTISEMENT
Mar 30, 2010
I tried to load windows xp in my pc but during installation (of course many times i tried to install) blue screen saying your computer is having problem like that. I checked the memory with diagnostic tool it said no error and also motherboard no error setupdd.sys at one time and another time stop: 0x000008e blue screen errors came during setup end Moreover i pressed skip for some files beining with letter w during setup in dos mode, but successfully installed. will it give any error after installation finishes?
View 7 Replies
View Related
Jan 6, 2009
I have a new bare bones Tower. When I try to install Windows XP Pro 1 - 2CPU OEM version 2002 everything goes fine until the "Install devices" sequence when the progress bar gets just over half way across it stops and the BLU screen appears. Cpu fan and two case fans. The other related verbage is... possible HD problem or recently installed devices should be disconnected. I tried a Dell reinstall windows XP Home edition SP1 also with no luck either. The Software is Authentic and has Halogram product key sticker purchase new by me. My thought is there are driver problems between the older software and the newer equipt but am hesitent to buy new version SP3.
View 7 Replies
View Related
Apr 1, 2006
I turned on my PC this morning to find it would restart after the Windows Loading screen and give me the list of safe mode, etc. I went into safe mode but it done the same. This is also the case for all of the other options, including last configuration. The previous night I received a BSOD (Blue screen of death) and there was a count up showing memory dump to hard drive. I read the instructions and as it said it was my first event and so I restart. However, I did restart when the counter was at around 34. Im guessing thats really a % and I should have waited until 100%?
View 3 Replies
View Related
Nov 13, 2009
I've got a Lenovo ThinkPad laptop that won't get past the blue screen of death. If i choose to start up on last know good config this is the blue screen i get:If i choose to start up in safe mode i get this screen first.
View 14 Replies
View Related
Jan 9, 2009
STOP: 0X00000024 (0X001902FA, 0XF7B2680C, 0XF7B2650C, 0X6F0AB6BD) This is the blue screen i get when i disable restart on errors. I've replaced the hard drive and even swapped it with a good drive with xp loaded....still the same error. I've tried running the restore disk...same thing. Bios loads properly and detects everything it needs too. Just after the bios i get a chioce window that says your computer stoped responding for what ever reason, blah blah blah. It allows me 5 choice, safemode, safemode networking, safemode cmd, last known good config and normally. If i choose any of them then immediatly hit F8 i get the rest of the options for boot up. Every choice ends the same way froim debug mode to safe mode. After you make your selection you get to the windows loading screen. About 2-3 seconds into it the computer goes into a rolling restart mode.
View 12 Replies
View Related
May 1, 2005
A friend of mine has a year old computer 2.4ghz running XP Pro.Recently the computer had gotten slower and slower and had lots of Popups. Sypbot found 127 bogus things going on.It could not clear all of them.We went into control panel and removed programs and took out a bunch of things that were not operating related programs.Computer was rebooted multiple times. Finally the computer just hangs when it gets to the blue XP screen, and will sit there for hours until rebooted.I have tried ever mode of Safe Mode to boot and I get the same blue XP screen. The mouse can still be moved around.I cannot boot from the CD rom with the XP disks and do not have bootable floppies. I cannot get into the setup screen to change the order of boot.Since this computer was a gift to the person, we do not know the administrator password.
View 9 Replies
View Related
Jan 17, 2005
When you start the computer it boots all the way to the login screen with all the users then you hear a clang from inside the computer then it restarts. It'll go into safe mode. I ran spybot and adaware from my thumb drive but they both couldn't fix all of the listed problems. Tried to do a disk check but it would stop due too "unspecified error". The hard drive is only a little over 6gigs with 15% free space(after cleanup from safe mode)Got it defraging now(gonna take all nite) Like I said this is an older machine as my g/f had one just like it and hers had windows 98 on it original. Not sure if my friend upgraded to xp or it she bought it like this. Says it was working fine up until a couple weeks ago.
View 9 Replies
View Related
May 17, 2005
i'm getting really desperate here. Heres my problem I was on my fully functional computer last night, here are the specs
-Windows XP Home
-512 DDR ram
-Geforce FX 5200
-Intel Pentium 4
-i865Gm-IL **NEW** motherboard (funtioned perfectly)
Alright, last night, the power went out while i was on the computer. When the power comes back on, i get a blue screen saying
UNMOUNTABLE_BOOT_VOLUME
I absolutely CANNOT get past this screen, i've tried booting in safe mode, and still get nothing. I've tried TONS of commands from the recovery console. When I load up the console it asks me to choose either D:MiniNT (Which i believe is not what i use) and D:I386 I've tried the following commands on BOTH d:MininNT and D:I386
chkdsk /r
chkdsk /f
chkdsk /p
fixboot
fixmbr
I've tried them all, and i get the exact same error, i was on the phone with a good friend whos a comp technician and he had no answers, then I phoned the mobo company, still no answers. I've tried unplugging my HDD, still nothing. I am TOTALLY lost!! could someone
View 13 Replies
View Related
Oct 15, 2006
I tried reinstalling xp and it said "unable to copy partmgr.sys"then it gave me the option to retry or skip. retry didn't work so i just canceled setup. is there anything i can do to get around this problem? also, windows update isn't working for me. it keeps failing during installation.
View 14 Replies
View Related
Sep 23, 2006
I recently built a new computer and it has been just an incredible load of troubles ever since the first boot up. I first installed Windows 2000 so I can actually boot up my computer then upgraded to Windows XP SP2. After this I had a messload of trouble getting errors during the XP installation which I believe were various fonts. Skipping over this the installation was successful and I was enjoying Windows XP. Now I did the automatic updates that is recommanded and let then download and install. Once they installed and the system rebooted, I never got to enjoy my computer.
After the restart the computer would hang where the log in screen should be then restart and do this over and over again. I thought this was an installation problem so I reinstalled 2000 so I could just reformat and fix the problem. Now my computer is rejecting every time I try to reformat and reinstall 2000 giving me various blue screen fatal errors and errors during the Windows 2000 setup preventing the installation from going any further..............
View 3 Replies
View Related
Apr 12, 2008
I decided to make the move and give SP3 a try,I shouldn't have bothered!All went well, and the system rebooted, well into the boot sequence I was greeted by a blue screen:STOP: C0000139 {Entry Point Not Found}The procedure entry point GdiGetBitmapBitSize could not be located in the dynamic link library GDI32.dll.
Naturally, I fired up Acronis True Image and restored this morning's image, but I figure at some point they'll try to push this update down on patch Tuesday
View 14 Replies
View Related
Oct 4, 2006
My screen just went to blue and states that "Warning spywrae threat detected on your pc"
to protect your computer from spyware attacks click here"
And then a warning keeps popping up from the active process bar saying
"system needs neseccary installation of spyware"
When i close the pop-up this web site appears http://total-pc-protection.com/
View 8 Replies
View Related
Nov 22, 2008
right i have laptop the windows is not english so i want to install new windows by booting when i try to do that the following errie comes up p#Blue screen, white text, following message (in summary): A problem ha been detected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGE_AREA Suggestions: Restart computer, if problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.Tech Info: ***STOP: 0x00000050 (0xBF32E9E4, 0x00000001, 0x805F87F4 0x00000002)[/COLOR][/COLOR]
View 5 Replies
View Related
Jul 2, 2005
There I was, typing along, when Norton flashed on my screen. I had a virus(I was connected to the internet at the time.) Norton announced that cleaning it
up was NO problem. Good, I thought. A few seconds later came the blue screen we all know, and hate. Hit the off button, waited a few seconds, rebooted. To my shock and dismay, Windows announced that it could not find windows/system32/config/system.
View 14 Replies
View Related
Aug 14, 2007
My computer is infected. I have ccCleaner, Spybot, Ad-Watch, Ad Aware, Windows live onecare. I have ran them all but I am still having problems. When I log onto Internet Explorer I get a blue screen that tells me I need to reset my security settings in order to view my home page which is road runner. I followed the instructions and nothing. I cannot view any flash sites. I tried to see if I am missing a flash player and I cannot locate one. When I try to download Adobe Flash Player, I am unable to do so as the download button does not appear on my screen ( I know where the button is supposed to be because I checked out the site on my daughters computer,which I am on now). I also tried to download other software to help with the spyware and malware, however the minute I hit download I either instantly get disconnected from the internet or I get an error message that says " Internet Explorer has encountered a problem and must shut down...". I have gone into safe mode and ran spybot and the others and still no better. I am getting a message that Windows Firewall is disabled, however when I got to it Its grey and it wont let me turn it on. I have been trying to fix my computer for days and am completely fustrated,
View 14 Replies
View Related
Jan 8, 2007
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
View 9 Replies
View Related
Nov 22, 2008
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
View 7 Replies
View Related
Sep 22, 2008
After around 10-15 min after logging in a program error box opens up saying winlogon.exe fatal error then it switches to a blue screen saying fatal error c0000021a error. I have windows 2000 proffessional and a HP compaq nc6120 laptop.
View 5 Replies
View Related
Nov 12, 2009
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
View 10 Replies
View Related
Oct 5, 2010
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
View 7 Replies
View Related
Oct 23, 2009
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies
View Related
Nov 18, 2006
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies
View Related
Apr 7, 2006
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
View 4 Replies
View Related
Apr 10, 2010
Recently we've been getting "Blue Screen Errors" on our Windows XP. The most common one is called "Blue Screen error caused by a device or driver." Since they mention a likely hardware or software problem, I suspect our computer screen or speakers might be to blame. A couple months ago, we hooked up a screen and speakers from different brands. I think the screen's brand name is Westinghouse and the model number is LCM-17v8, and I think the speakers brand name is The Digital Experience inc., Model number gem 2.0 USB.
We've also gotten other error messages along with this one, such as "Address a problem with your computer", also strongly suggesting a problem with hardware, and "Troubleshoot a problem with your audio software". Is it possible that the screen or speakers may be incompatible with the computer, resulting in these errors, or would it be something else?
View 3 Replies
View Related
Dec 29, 2007
I get a blue screen error message?
View 6 Replies
View Related
Oct 19, 2010
I have a Prolink Hurricane 9601C Modem. It has two LED's indicating Power and Link. As of recently, the Link LED, starts to flash on and off, and all network connections get terminated. The Driver software of the Modem stops responding. I tried to unplug the network cable and re attaching it, but nothing happens.... The System will not shutdown either. Once windows logs off, I get this Blue Screen Error.A problem has been detected and windows has been shut down to prevent damage to your computer.
View 8 Replies
View Related
Jun 18, 2008
For the last three days I have been getting a blue screen error, the only thing I have done is ran Softwar inspector Secuna, and uninstalled Abobe Reader and reinstalled the updated version.Error message: A problem has been detectd and Windows has been shut down to prevent damage to your computer.KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error Screen, restart your computer. If this screen apperas again floow these steps. Check to make sure any new hardware or software is properly installed. If this is a new install ask your hardware or software manufactor for any windows updates you might need. If the problem continues, disable or remove any new installed hardware or software. Disable BIOS memory options such as coaching or shadowing. If you need to use Safe Mode to remove or disable components restart your computer. Press F8 to select Advanced Start up Options, and then select Safe Mode.
Technical Information:
*** Stop:0x00000077 (Ox000000E,OxC000000E, Ox00000000, OxOACF80000)
Beginning dump of Physical memory.
I don't really understand this could someone please help me with this problem?
View 14 Replies
View Related
May 23, 2006
I am running XP media center 2005 and it is a pretty fresh install. All of a sudden today I am having crashes and the one blue screen I got had this code on it -
STOP: 0X0000008E(0XC000005, 0X805AE8AC, 0XA55DEBDC,0X00000000)
View 14 Replies
View Related
Mar 17, 2007
I've recently put together a PC and for the first 3 weeks it was running perfectly. Then in the past week, it started crashing completely randomly it seems. No error messages or blue screens, it just auto restarts.
On reboot, it has an error log (the following are 5 examples out of about 10 crashes so far)
Ex 1
Error code 1000008e, parameter1 c0000005, parameter2 c0384dc0, parameter3 ebf4e4ec, parameter4 00000000.
(This occurred when I was finishing an installation of iTunes..don't know if that's of significance?)
Ex 2
Error code 1000008e, parameter1 c0000005, parameter2 c038d724, parameter3 ecb494ec, parameter4 00000000.
Ex 3
Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec2dc4e4, parameter4 00000000.
Ex 4
Error code 1000008e, parameter1 c0000005, parameter2 c038c2f4, parameter3 ec94189c, parameter4 00000000.
Ex 5
Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec4da4e4, parameter4 00000000.
I've not installed any new hardware in the last week nor any major programs. I've got no spyware (according to spybot). Norton windoctor reported a missing msvcr80.dll (i realise i can't just add this .dll back into my system...plus I'm told it's a necessary .dll for office 2007 and .NET 2.0)
Any idea what my problems could be??
PS: the attached jpegs shows the errors windoctor comes up with
View 12 Replies
View Related
Jan 5, 2009
I have XP Media Center on my desktop and got a BSOD the other day. Unfortunately, I didn't copy the error code on the BSOD down. Now, whenever I try to open IE or iTunes or just about any program, the cursor just stays in the 'working' mode and the computer never does anything else. I can't even restart it via the Start menu. I have tried to do a system restore, but the pc freezes just when I click on 'next' to start the restore. I've even tried the system restore in safe mode with command prompts and got the same result.
I ran Spybot, Ad Aware and AVG in safe mode, but they did not pick up anything. Not sure if that is relevant to my problem... Is there any way I can force the BSOD so I can get an error code? Does anyone have any idea what might be causing my problems?
View 9 Replies
View Related
