Failure Of Installation - Blue Screen Error
Mar 30, 2010
I tried to load windows xp in my pc but during installation (of course many times i tried to install) blue screen saying your computer is having problem like that. I checked the memory with diagnostic tool it said no error and also motherboard no error setupdd.sys at one time and another time stop: 0x000008e blue screen errors came during setup end Moreover i pressed skip for some files beining with letter w during setup in dos mode, but successfully installed. will it give any error after installation finishes?
View 7 Replies
ADVERTISEMENT
Mar 4, 2006
I did not add any new memory to my systeme. however, I did remove my current memory to access the inside of my laptop. The fan wire had come loose so I reconnected. I fixed that problem only to find out the problem with the registry. I have chose the load last known configuration that worked correctly but it still gives me the little blue pop up screen with the error, then the restart.
I tried to use my windows xp os disk to try and repair it but it wont read the disc before the blue screen comes back up. I'm thinking of buying a Laptop To IDE Hard Drive Adapter. So, I could at least format my hard drive. I'm not sure if this would be a good idea. I went to the microsoft webpage that deals with this issue but I can not seem to find one to fix my problem.
View 3 Replies
View Related
Mar 19, 2009
Error message(blue screen of death): "STOP: c0000218{registry file failure} the registry cannot load the hive(file): systemrootsystem32configsoftware or its log or alternate it is corrupt, absent, or not writable
beginning dump of physical memory physical memory dump complete. contact your system administator or technical support group for further assistance." I was told that windows needed to be rebooted. So I moved my hard drive to another comp and transfered all my memory onto an external hard drive so I could reboot windows. I found an xp cd and tried to reboot from ide cd-rom and it wouldnt work. i ran a diagnostics on my ide and this error came up "primary ide: 0 st380011a- fail code 7"
View 6 Replies
View Related
Oct 3, 2007
I'm gettting a blue screen when i try to start my laptop with Windows XP media. It's saying the registry cannot load the hive (file): /SystemRootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable. I'm guessing I need the windows xp media reinstallation disk, but I can't seem to find it.
View 5 Replies
View Related
Jan 6, 2009
I have a new bare bones Tower. When I try to install Windows XP Pro 1 - 2CPU OEM version 2002 everything goes fine until the "Install devices" sequence when the progress bar gets just over half way across it stops and the BLU screen appears. Cpu fan and two case fans. The other related verbage is... possible HD problem or recently installed devices should be disconnected. I tried a Dell reinstall windows XP Home edition SP1 also with no luck either. The Software is Authentic and has Halogram product key sticker purchase new by me. My thought is there are driver problems between the older software and the newer equipt but am hesitent to buy new version SP3.
View 7 Replies
View Related
Jul 8, 2008
I have a dell Dimension 4600, which has given me so many problems throughout the years. When we got it, the thing ran great. This was a few years ago... A year or two ago the thing got a NASTY Virus, and ever since then it hasn't worked because of hardware and software problems. I pretty much decided to give up at that point and the thing has been sitting around collecting dust.My dad thought it was the memory, and so today I carted the computer up into my room, set it up and put in a new memory card. It didn't help, My computer goes in circles when trying to boot up, until the blue screen pops up.
It cannot boot from the hard drive, and I get the message "press F1 to retry boot, F2 for setup utility"
F2 takes me to the utility, but as far as I know I don't want to change anything here at the moment.
if I press F1 it pops up the same message.
So I tried Booting from the CD and Reinstalling from the CD. Neither worked and both of these result in the Blue screen of death. For the install, the blue screen would come up at the third bullet point which I believe is "preparing installation."
***STOP: 0x0000000A (0xCDCDCDCD, 0x00000002, 0x00000001, 0x807d600f)
WhenI continue the current upgrade I get "IRQL_NOT_LESS_OR_EQUAL"
the Tech info is:
***STOP: 0x0000000A (0x0a130013, 0x00000002, 0x00000000, 0x807d5ff9)
I am getting a few other blue screens but I don't know what the say, But as far as I know, everything I have tried has lead to some form of Blue Death screen. Any Ideas on how I can get this puppy to work?I also tried to boot from my Laptops CD but it didn't work so its not the CD that is the problem.
View 14 Replies
View Related
May 20, 2008
XP Pro Service pack 2. Version 2002. Have not been able to update for over a year. Continually says updates are ready to install (little yellow shield with exclamation point on bottom right toolbar). It goes through the install process then finally pulls up a screen saying:
Installation Failure
Error Code: 0x80242006 then says: Try to install the update again, or request help from one of the following resources. I've opened up a support request but none of their suggestions were working (install 1 at the time, etc). I went out of town, returned and they'd closed the request.
View 2 Replies
View Related
Apr 6, 2006
I get the error message "Installation failure. Error code 0x643" when trying to install updates for the Malware removal tool. I have automatic updates on my computer also Windows genuine advantage validation.
View 5 Replies
View Related
Jun 20, 2008
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies
View Related
May 3, 2005
a friend asked me to install a new hard drive for him because his crashed. So i purchased a new hard drive (maxtor 60 gb) set out to partition and format the drive, using a win 98 boot disk. I partitoned the drive ( for large volume drive.) Formatted the drive ( format c: /s ) to include system files.and proceeded with Os install Windows 2000. Everything went as smooth as silk... the when install finished, I was prompted to remove the disk from cd rom and complete installation with the onscreen prompt. I removed disk, clicked finish and the computer rebooted upon loading, when it went to start windows it said DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER
I put the Win 2K disc back in and hit enter. It started windows perfectly no errors at all... then I took disk out re-started ( to check system stability) and back to the same error message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER. I of course freaked out, I feel like an idiot cause I cant get this thing to work right. tried reformatting without the sytem files, re-partioning tried win 98, winXP, nothing same stuff! So I talked to a pal got a hard drive wipe program off the net "killdisk", wiped the drive and tried to reinstall Win 2K, same problem.
View 8 Replies
View Related
Apr 16, 2005
i got on it, and it started loading the splash screen with windows xp on but then this blue screen error came on.
below is the error message.
stop: c0000218 {Registry FILE FAILURE}
The registry cannot load the hive (file):
SYSTEMROOTSYSTEM32CONFIGSOFTWARE
or its log or alternative.
it is corrupt, absent, or not writable.
View 14 Replies
View Related
Dec 22, 2008
About 2-3 weeks ago my computer started playing up, i switched it on and it came up with disk boot failure, so i restarted the computer and it started up fine.. a few days later i got a blue screen message, didn't have enough time to read it, ever since the computer starts up to disk boot failure and i restart and it works, i do that every day to use it. Today however i restarted and it was freezing, wouldn't let me into BIOS setup, or anything, but after a few restarts it worked again.. about 10minutes ago the computer came up with a blue screen as i left the room, i didn't have enough time to see all of it but i got, 0x000000f4 (0x00000003 couldnt get the rest, and something about physical memory dump. i had to restart again about 3 or 4 times before it worked, and when i got through the computer froze.
View 1 Replies
View Related
Jun 24, 2008
my windows xp was going fine for over 2 yrs but from few days i neglected shutting down pc in safe way,i usually press the button of UPS. when i was playing a game it crashed and some blue screen came out
saying an error stop 0*101022324a something like that
then i formatted and installed xp and was going fine again after few days when i was playing a game suddenly it hanged and different colours came and restarded suddenly from then onwards as it continues and before opening desktop where it says microsoft xp some yellow lines come and then it stops formatted and installed xp many times but the same problem comes also many pixels come when it says intel on the screen
View 3 Replies
View Related
Jul 31, 2005
Ok this error will only pop up only about 3/4 of the time I attempt to go into Windows. Right after the windows boot screen finishes I'll get a blue screen of death for windows xp, and it says a bunch of numbers and stuff then at the bottom there is a file called tbcwdm.sys. This just started happening in windows, and I can't write the code down because the screen will dissapear in a matter of seconds and reboot the computer.
View 1 Replies
View Related
Feb 18, 2009
I had an ELECTRIC POWER FAILURE during the start of Windows 2000 Professional this morning. After it, when I try to restart my computer, it begins to load Windows, but I receive the famous blue screen. The error code is:
STOP: 0x0000007B (0x8243D030, 0xC0000006, 0x00000000, 0x00000000)
INACCESSIBLE_BOOT_DEVICE
I tried with F8 (last valid configuration, etc of the list), but all give the same blue screen. My repair floppy disk is from september 2007. After it, I installed a second HD for files backup and needed to put drivers for Windows recognize the bigger HD size. All worked fine until the power failure this morning. Antivirus and scan are up to date. Since I installed the driver for the bigger size HD, I cannot more boot through the floppy disk, because it not recognizes the HD. Is there anything I can do to not reinstall Windows?
View 6 Replies
View Related
Apr 25, 2005
My computer is not booting up. A while back while using my computer a blue screen popped up saying that windows encountered an error and that it would shut down to prevent damage. When that happened I simply restarted my computer and everything was fine. This happened one or two times later and everything was fine. Today it happened again and when I went to restart it it the blue screen popped up immediately after that. On the third time I went to restart it the computer just said boot failure and did nothing. Every time I try to restart it does the same thing. It will let me press f2 for the start up settings but when I press f8 for safe mode it does nothing.
View 10 Replies
View Related
Feb 26, 2008
when my PC boots it up it goes to a black screen giving options such as safe mode etc. All of these options end up with the computer going to a bluescreen and the following message: STOP: c0000218 (Registry File Failure) The registry cannot load the hive (file): SystemRootSystem32ConfigSOFTWARE It is corrupt, absent, or not writable. Beginning dump of physical memory Physical memory dump complete. have no disks at all with laptop. And my knowldge goes as far as being able to use the internet.
View 3 Replies
View Related
Oct 15, 2006
I tried reinstalling xp and it said "unable to copy partmgr.sys"then it gave me the option to retry or skip. retry didn't work so i just canceled setup. is there anything i can do to get around this problem? also, windows update isn't working for me. it keeps failing during installation.
View 14 Replies
View Related
Sep 23, 2006
I recently built a new computer and it has been just an incredible load of troubles ever since the first boot up. I first installed Windows 2000 so I can actually boot up my computer then upgraded to Windows XP SP2. After this I had a messload of trouble getting errors during the XP installation which I believe were various fonts. Skipping over this the installation was successful and I was enjoying Windows XP. Now I did the automatic updates that is recommanded and let then download and install. Once they installed and the system rebooted, I never got to enjoy my computer.
After the restart the computer would hang where the log in screen should be then restart and do this over and over again. I thought this was an installation problem so I reinstalled 2000 so I could just reformat and fix the problem. Now my computer is rejecting every time I try to reformat and reinstall 2000 giving me various blue screen fatal errors and errors during the Windows 2000 setup preventing the installation from going any further..............
View 3 Replies
View Related
Apr 12, 2008
I decided to make the move and give SP3 a try,I shouldn't have bothered!All went well, and the system rebooted, well into the boot sequence I was greeted by a blue screen:STOP: C0000139 {Entry Point Not Found}The procedure entry point GdiGetBitmapBitSize could not be located in the dynamic link library GDI32.dll.
Naturally, I fired up Acronis True Image and restored this morning's image, but I figure at some point they'll try to push this update down on patch Tuesday
View 14 Replies
View Related
Oct 4, 2006
My screen just went to blue and states that "Warning spywrae threat detected on your pc"
to protect your computer from spyware attacks click here"
And then a warning keeps popping up from the active process bar saying
"system needs neseccary installation of spyware"
When i close the pop-up this web site appears http://total-pc-protection.com/
View 8 Replies
View Related
Nov 22, 2008
right i have laptop the windows is not english so i want to install new windows by booting when i try to do that the following errie comes up p#Blue screen, white text, following message (in summary): A problem ha been detected and windows has been shut down to prevent damage to your computer. PAGE_FAULT_IN_NONPAGE_AREA Suggestions: Restart computer, if problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.Tech Info: ***STOP: 0x00000050 (0xBF32E9E4, 0x00000001, 0x805F87F4 0x00000002)[/COLOR][/COLOR]
View 5 Replies
View Related
May 29, 2006
I'm in the process of repair/recovery of my machine (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). I'm following exactly the instructions in:
http://attachments.techguy.org/attac...chmentid=62075, but a problem has developed. The "software" file (which is the file that the original blue screen error message says is "corrupt, absent or not writable") will not copy to the new tmp directory to create the backup. My understanding from the article is that this backup file (software.bak) will later be used to restore correct settings for various software applications. Since I can't copy it, it appears that I am screwed,
View 1 Replies
View Related
Jan 8, 2007
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
View 9 Replies
View Related
Nov 22, 2008
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
View 7 Replies
View Related
Sep 22, 2008
After around 10-15 min after logging in a program error box opens up saying winlogon.exe fatal error then it switches to a blue screen saying fatal error c0000021a error. I have windows 2000 proffessional and a HP compaq nc6120 laptop.
View 5 Replies
View Related
Nov 12, 2009
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
View 10 Replies
View Related
Oct 5, 2010
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
View 7 Replies
View Related
Oct 23, 2009
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies
View Related
Nov 18, 2006
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies
View Related
Apr 7, 2006
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
View 4 Replies
View Related
