Hang At Loading Screen - Blue Screen Error On Reinstallation
Nov 18, 2006
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies
ADVERTISEMENT
Oct 5, 2010
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
View 7 Replies
View Related
Feb 18, 2006
First I run Windows 2000 and keep it updated as much as Microsoft releases updates. I also reguarly run anti-virus, anti-spyware, defrag, etc. The problem started 2 weeks ago when I booted the computer it showed the MB splash screen and then instead of the 2000 loading screen it just showed "Error loading OS." in the top left. Well I figured the hard drive was going so I pulled it out, blew it off, tapped on it, checked connections and stuck it back in. Rebooted and everything seemed fine and has the past 2 weeks. Well today I was playing Civilization 4 and the screen went blue. Yes the dreaded blue screen, but no error messages on the screen or anything. Just a solid blue screen. The computer didn't respond to anything so I pushed the power button on the case. Well upon restarting nothing happens. Just a blank screen. No MB splash screen or anything. Everything is powered up and I can hear the hard drive spinning, but nothing is on the screen.
View 2 Replies
View Related
Jan 2, 2006
When I boot my computer up my computer is freezing up once in a while at the loading screen with the blue loading bar. The bar goes across about three times and the on the fourth time it stops and freezes and nothing happens after that. Once in awhile it will go to a blue error screen witht the following codes: 0x0000008E (0xC0000005, 0xF9787C09, 0xF9677FE8, 0x00000000).
View 7 Replies
View Related
Apr 17, 2005
Just installed xp on a computer that had previously had xp on it, but was running real slow, so I did a fresh install and now it will not boot up past the loading screen. I have tried using fdisk to erase the disk compleletly but it has not helped one bit.
View 8 Replies
View Related
Jun 30, 2006
I get this error. Blue screen and all.I tried different things that it says to try.Like do a scan disk.
But It will not let me load a A:disk or CD I make them the first boot but. Bypasses it right to the HD and then the blue screen with those errors.
View 9 Replies
View Related
Oct 18, 2006
My dads pc was fine then all of the sudden it just restarted.And it came up to the options:restart in safe mode estart in safemode with networking estart in safe mode with networking Last known working config Normal But when he tries any of them.. None of them work The windows loading screen will come up flash a blue screen super fast (cannot read it no matter how hard i try) then go back to boot option screen.
View 3 Replies
View Related
Nov 3, 2009
The issue started when I went into msconfig and checked 'safe mode' in boot.ini. I restarted my computer and every time it would get to the Windows XP loading screen it would get The Blue Screen. I fixed this issue by putting in the Windows CD and clicked repair.
View 11 Replies
View Related
Sep 12, 2009
i just recently reinstalled windows xp on an old computer i had become corrupted and i had to reinstall it and now it boots up fine but during the loading screen it goes blue screen idk ive tried to reinstall the os again and still the same any advice it an hp pavilion 514c
View 1 Replies
View Related
Nov 12, 2009
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
View 10 Replies
View Related
Oct 23, 2009
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies
View Related
Mar 8, 2010
New to this site so go easy on me,please! I've been through the site looking for an answer to my problem with no luck so here goes:I am trying to reformat my drive by starting over with my XP disc. After initiating install from the CD all goes well with the boot (loads drivers, and configures devices,etc). When it tries to load Windows I get a blue screen that says:error problem has been detected and windows has shut down.If this is the first time you've seen this stop error screen, restart, if not , follow these steps. Check for viruses. remove any newly installed drives or hard drives. check that the hard drive is configured properly. Run CHKDSK/F to check for corruption, then restart.
View 4 Replies
View Related
Jul 30, 2008
so when i start my computer everything goes fine until, the windows xp screen comes up when it loads then the bar freezes and a blue screen pops up saying."check for any viruses. remove any newly installed hard drives or hard drive controllers check your hardrive to make sure it is properly configured and terminated. it also says to check for hardrive corruption.the strange thing is, is that i can run bart pe tools and access my hardrive but i cant start my computer regular idk.
View 1 Replies
View Related
Jul 5, 2005
Yesterday, I acquired the "istsvc" spyware, and could not get rid of it. I ran an anti-spyware program, and it said it would run again when I restarted my computer to finish the job. I restarted my computer, and it never finished booting. It goes to the black screen with the Windows logo and the blue scrolling line just fine. Then it goes to the light blue screen with the dark blue borders and the words Microsoft Windows XP in the middle, and just stops. I know it is not frozen because there is a mouse pointer on-screen that I can still move. It stops at this same point no matter what mode I try to load in. I am using XP Home SP2.
View 3 Replies
View Related
Apr 7, 2006
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
View 4 Replies
View Related
Jun 30, 2005
When booting PC up, there is a problem with URLMON.DLL, i took the harddrive out and copied over the file, and was given information that some other DLL files were damaged also, i painstakingly copied the files over, untill it booted up, ran all the scans I could - MS AntiSpy, Adaware, Norton AV, and Norton WinDoctor, Spy Subtract. Rebooted the computer and the First URLMON.DLL error message came up and would not allow me back into windows.
View 3 Replies
View Related
Mar 18, 2006
The other night I was on my computer when some strange things began to happen. Any program I tried to open would not open, and then the shortcuts on my desktop changed icons to the folder icon and the text dissapeared. I couldn't do anything, so I just figured it was some freak bug or something. I couldn't run any spyware or virus programs because it wouldn't let me open any programs. So I try to shut it down, and no matter how many times I clicked on shut down I still had to hold the button in to shut it off. Now, when I restart my computer, it seems to load just fine but when it gets to the blue screen with the windows xp logo on it, it just stops. The mouse cursor is there and I can move it but it never gets past the blue screen. I tired loading it in safe mode and it loads all the files up through mup.sys, which I have learned is the last file that loads so it is something after that. I have tried to start it using the last good configuration and still no luck. Any ideas? Do you think it is spyware/virus or just a corrupt system file?
View 11 Replies
View Related
Apr 1, 2006
I turned on my PC this morning to find it would restart after the Windows Loading screen and give me the list of safe mode, etc. I went into safe mode but it done the same. This is also the case for all of the other options, including last configuration. The previous night I received a BSOD (Blue screen of death) and there was a count up showing memory dump to hard drive. I read the instructions and as it said it was my first event and so I restart. However, I did restart when the counter was at around 34. Im guessing thats really a % and I should have waited until 100%?
View 3 Replies
View Related
Oct 18, 2006
My dad installed some program on his computer, didn't like it, and uninstalled it. After that, his computer crashed and I haven't been able to get passed the screen with Windows XP Professional and the moving blue bar and then it freezes. Last Good Configuration doesn't work; it ends up at the same place and the blue bar stops also. I System Restored it to the day before he installed the program; once again, the blue bar stops moving.Could this be a hardware issue? Virus (unlikely)?
View 6 Replies
View Related
Apr 10, 2010
Recently we've been getting "Blue Screen Errors" on our Windows XP. The most common one is called "Blue Screen error caused by a device or driver." Since they mention a likely hardware or software problem, I suspect our computer screen or speakers might be to blame. A couple months ago, we hooked up a screen and speakers from different brands. I think the screen's brand name is Westinghouse and the model number is LCM-17v8, and I think the speakers brand name is The Digital Experience inc., Model number gem 2.0 USB.
We've also gotten other error messages along with this one, such as "Address a problem with your computer", also strongly suggesting a problem with hardware, and "Troubleshoot a problem with your audio software". Is it possible that the screen or speakers may be incompatible with the computer, resulting in these errors, or would it be something else?
View 3 Replies
View Related
Jun 13, 2008
When i turn it on I get the 'Windows did not restart properly screen'and no matter which of the options I choose, i see the windows logo loading after a short time the blue screen apears for a split second and then its back to the first screen all over again.
iv gone into BIOS, i ran the HD self test, and both the short and long test fail before really even doing anything.
View 1 Replies
View Related
Jan 8, 2007
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
View 9 Replies
View Related
Nov 22, 2008
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
View 7 Replies
View Related
Sep 22, 2008
After around 10-15 min after logging in a program error box opens up saying winlogon.exe fatal error then it switches to a blue screen saying fatal error c0000021a error. I have windows 2000 proffessional and a HP compaq nc6120 laptop.
View 5 Replies
View Related
May 9, 2007
I have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal.
It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
View 1 Replies
View Related
Dec 29, 2007
I get a blue screen error message?
View 6 Replies
View Related
Oct 19, 2010
I have a Prolink Hurricane 9601C Modem. It has two LED's indicating Power and Link. As of recently, the Link LED, starts to flash on and off, and all network connections get terminated. The Driver software of the Modem stops responding. I tried to unplug the network cable and re attaching it, but nothing happens.... The System will not shutdown either. Once windows logs off, I get this Blue Screen Error.A problem has been detected and windows has been shut down to prevent damage to your computer.
View 8 Replies
View Related
Jun 18, 2008
For the last three days I have been getting a blue screen error, the only thing I have done is ran Softwar inspector Secuna, and uninstalled Abobe Reader and reinstalled the updated version.Error message: A problem has been detectd and Windows has been shut down to prevent damage to your computer.KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error Screen, restart your computer. If this screen apperas again floow these steps. Check to make sure any new hardware or software is properly installed. If this is a new install ask your hardware or software manufactor for any windows updates you might need. If the problem continues, disable or remove any new installed hardware or software. Disable BIOS memory options such as coaching or shadowing. If you need to use Safe Mode to remove or disable components restart your computer. Press F8 to select Advanced Start up Options, and then select Safe Mode.
Technical Information:
*** Stop:0x00000077 (Ox000000E,OxC000000E, Ox00000000, OxOACF80000)
Beginning dump of Physical memory.
I don't really understand this could someone please help me with this problem?
View 14 Replies
View Related
May 23, 2006
I am running XP media center 2005 and it is a pretty fresh install. All of a sudden today I am having crashes and the one blue screen I got had this code on it -
STOP: 0X0000008E(0XC000005, 0X805AE8AC, 0XA55DEBDC,0X00000000)
View 14 Replies
View Related
Mar 17, 2007
I've recently put together a PC and for the first 3 weeks it was running perfectly. Then in the past week, it started crashing completely randomly it seems. No error messages or blue screens, it just auto restarts.
On reboot, it has an error log (the following are 5 examples out of about 10 crashes so far)
Ex 1
Error code 1000008e, parameter1 c0000005, parameter2 c0384dc0, parameter3 ebf4e4ec, parameter4 00000000.
(This occurred when I was finishing an installation of iTunes..don't know if that's of significance?)
Ex 2
Error code 1000008e, parameter1 c0000005, parameter2 c038d724, parameter3 ecb494ec, parameter4 00000000.
Ex 3
Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec2dc4e4, parameter4 00000000.
Ex 4
Error code 1000008e, parameter1 c0000005, parameter2 c038c2f4, parameter3 ec94189c, parameter4 00000000.
Ex 5
Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec4da4e4, parameter4 00000000.
I've not installed any new hardware in the last week nor any major programs. I've got no spyware (according to spybot). Norton windoctor reported a missing msvcr80.dll (i realise i can't just add this .dll back into my system...plus I'm told it's a necessary .dll for office 2007 and .NET 2.0)
Any idea what my problems could be??
PS: the attached jpegs shows the errors windoctor comes up with
View 12 Replies
View Related
Jan 5, 2009
I have XP Media Center on my desktop and got a BSOD the other day. Unfortunately, I didn't copy the error code on the BSOD down. Now, whenever I try to open IE or iTunes or just about any program, the cursor just stays in the 'working' mode and the computer never does anything else. I can't even restart it via the Start menu. I have tried to do a system restore, but the pc freezes just when I click on 'next' to start the restore. I've even tried the system restore in safe mode with command prompts and got the same result.
I ran Spybot, Ad Aware and AVG in safe mode, but they did not pick up anything. Not sure if that is relevant to my problem... Is there any way I can force the BSOD so I can get an error code? Does anyone have any idea what might be causing my problems?
View 9 Replies
View Related
