Stops Loading On Blue Screen With Xp Logo
Mar 18, 2006
The other night I was on my computer when some strange things began to happen. Any program I tried to open would not open, and then the shortcuts on my desktop changed icons to the folder icon and the text dissapeared. I couldn't do anything, so I just figured it was some freak bug or something. I couldn't run any spyware or virus programs because it wouldn't let me open any programs. So I try to shut it down, and no matter how many times I clicked on shut down I still had to hold the button in to shut it off. Now, when I restart my computer, it seems to load just fine but when it gets to the blue screen with the windows xp logo on it, it just stops. The mouse cursor is there and I can move it but it never gets past the blue screen. I tired loading it in safe mode and it loads all the files up through mup.sys, which I have learned is the last file that loads so it is something after that. I have tried to start it using the last good configuration and still no luck. Any ideas? Do you think it is spyware/virus or just a corrupt system file?
View 11 Replies
ADVERTISEMENT
Jun 13, 2008
When i turn it on I get the 'Windows did not restart properly screen'and no matter which of the options I choose, i see the windows logo loading after a short time the blue screen apears for a split second and then its back to the first screen all over again.
iv gone into BIOS, i ran the HD self test, and both the short and long test fail before really even doing anything.
View 1 Replies
View Related
Sep 1, 2009
The past few days I've been having issues with my desktop where when I turn it on, it runs through BIOS, and then begins to boot windows xp, but after maybe 10-15 seconds of loading windows xp, the loading bar beneath the Windows XP logo (it has three little blue boxes that move from left to right) will just stop moving. If I reset the computer it then asks to go into normal booting, or safe mode, safe mode booting always works but even when I system restore it doesnt seem to work. Out of maybe 50 times where the loading bar has crashed, its only properly loaded about two or three times.
View 3 Replies
View Related
May 20, 2010
Today I decided to do a system restore on my HP desktop computer. It was running painfully slow, to many un-needed programs etc. So I backed up all the files that I needed to keep and save to my external hard drive. The computer did not come with an operating disk so the only way I could get it back to sorta normal is to do the system restore. After I backed up all my files I restarted the computer and pressed F11 or 12 cant remember the one for system recovery/restore. About 12 seconds into the restore/recovery thing I accidentally hit the power switch under the table When I turned the computer back on I presses the F11 button again and this time made sure nothing bad happened. After it completed its task I clicked OK and restarted the computer.
View 9 Replies
View Related
May 24, 2006
My computer froze so I tried to restart my computer by turning it off from the tower. I waited for the screen to pop up letting me know that it restarted okay, But it never came up just stopped at the windows XP loading screen. I waited for it to go but it just sat there. The blue bar was moving but it never loaded all the way. So I turned it off once again by the tower and I got a black screen to pop up that told me to restart in a few ways such as
View 3 Replies
View Related
Oct 19, 2009
generic cp system is on wireless network Netgear and broadband cable modem Dell laptop connected to network, not affected. Brother all in one printer connected, not affected.
View 2 Replies
View Related
Jan 8, 2006
I Installed A New Programme Which Was Downloaded From Bit Torrent
Blue Screen - Memory Dump
Rebooted And Now It Just Hangs On Windows Xp Logo Screen.
Tried To Boot Using Safe Mode But No Joy.
Also Tried To Use The Restore Disks And The Xp Disk Itself But It Would Not Boot From Those.
What Do I Do Now? I Dont Want To Format The Drive And Loose All My Files.
View 2 Replies
View Related
Jan 9, 2009
Hello there, i turn the pc on, i log on and when windows loads up it just goes to a blue screen and then shuts down.
View 8 Replies
View Related
Mar 18, 2006
I can't get pass the windows logo. I can't boot into safe mode, can't boot into last knowm configuration or boot to a crompt. I don't have a recovery disc. Can anybody help?
View 14 Replies
View Related
Feb 21, 2007
when I first start the computer, windows hangs between the black windows logo screen and the first blue screen that says "windows is starting". I have to hit the reset button, it goes to the dos screen with the safe mode, etc. choices. I choose "start using last known good configuration" and I'm good to go. If I turn the computer off during the day and turn it back on, It works fine. It only hangs on the first start of the day.
View 10 Replies
View Related
Sep 20, 2008
My XP computer (Dell dimension 5000) has been playing up alot recently and now after going to blue screen once more i can no longer boot up at all, Now everytime i boot up, my computer loads up untill the windows logo (splash?) screen and then goes to blue screen almost instantly. Now i would try and reinstall XP using the CD but i cant find it ANYWHERE, i do however have a vista startup disc. Ive tried booting the computer with the vista CD then pressing F12 to go to the boot up menu. However when i select "onboard USB or CD_ROM drive" e message appears below, "fress f1 to continue or f2 to run setup utility" then when i press f1 to continue another message appears below saying press f1 to reboot and f2 to run setup utility. pressing F1 gives the same message and f2 takes me to this blue screen with setup information and other options. Basically i cant get my computer to load up at all, and seeing as ive lost the XP disc (careless i know) is it possible to install vista on it rather than reinstalling XP? If not does anyone have any suggestions as to how i can fix my computer, or at least get it to boot? I have tried running it in safe mode nd last known good configuration and all that but still no success, i ran a few diagnostics which said the hard drive is fine. I'm totally clueless in this department so a step by step.
View 14 Replies
View Related
Jul 30, 2005
the computer freezes at start-up on the blue screen that shows the Windows XP logo, and the words "Windows is starting up". I found that I can navigate
through this at startup by tapping the F8 key rapidly before that screen appears. I tried the System Restore to a date earlier than the administrator's work, but no help. Is their a repair or restore procedure that will cure this problem?
View 3 Replies
View Related
Jan 6, 2009
I have a new bare bones Tower. When I try to install Windows XP Pro 1 - 2CPU OEM version 2002 everything goes fine until the "Install devices" sequence when the progress bar gets just over half way across it stops and the BLU screen appears. Cpu fan and two case fans. The other related verbage is... possible HD problem or recently installed devices should be disconnected. I tried a Dell reinstall windows XP Home edition SP1 also with no luck either. The Software is Authentic and has Halogram product key sticker purchase new by me. My thought is there are driver problems between the older software and the newer equipt but am hesitent to buy new version SP3.
View 7 Replies
View Related
Oct 5, 2010
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
View 7 Replies
View Related
Oct 18, 2006
My dads pc was fine then all of the sudden it just restarted.And it came up to the options:restart in safe mode estart in safemode with networking estart in safe mode with networking Last known working config Normal But when he tries any of them.. None of them work The windows loading screen will come up flash a blue screen super fast (cannot read it no matter how hard i try) then go back to boot option screen.
View 3 Replies
View Related
Nov 18, 2006
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies
View Related
Mar 8, 2010
New to this site so go easy on me,please! I've been through the site looking for an answer to my problem with no luck so here goes:I am trying to reformat my drive by starting over with my XP disc. After initiating install from the CD all goes well with the boot (loads drivers, and configures devices,etc). When it tries to load Windows I get a blue screen that says:error problem has been detected and windows has shut down.If this is the first time you've seen this stop error screen, restart, if not , follow these steps. Check for viruses. remove any newly installed drives or hard drives. check that the hard drive is configured properly. Run CHKDSK/F to check for corruption, then restart.
View 4 Replies
View Related
Jul 30, 2008
so when i start my computer everything goes fine until, the windows xp screen comes up when it loads then the bar freezes and a blue screen pops up saying."check for any viruses. remove any newly installed hard drives or hard drive controllers check your hardrive to make sure it is properly configured and terminated. it also says to check for hardrive corruption.the strange thing is, is that i can run bart pe tools and access my hardrive but i cant start my computer regular idk.
View 1 Replies
View Related
Jul 5, 2005
Yesterday, I acquired the "istsvc" spyware, and could not get rid of it. I ran an anti-spyware program, and it said it would run again when I restarted my computer to finish the job. I restarted my computer, and it never finished booting. It goes to the black screen with the Windows logo and the blue scrolling line just fine. Then it goes to the light blue screen with the dark blue borders and the words Microsoft Windows XP in the middle, and just stops. I know it is not frozen because there is a mouse pointer on-screen that I can still move. It stops at this same point no matter what mode I try to load in. I am using XP Home SP2.
View 3 Replies
View Related
Feb 18, 2006
First I run Windows 2000 and keep it updated as much as Microsoft releases updates. I also reguarly run anti-virus, anti-spyware, defrag, etc. The problem started 2 weeks ago when I booted the computer it showed the MB splash screen and then instead of the 2000 loading screen it just showed "Error loading OS." in the top left. Well I figured the hard drive was going so I pulled it out, blew it off, tapped on it, checked connections and stuck it back in. Rebooted and everything seemed fine and has the past 2 weeks. Well today I was playing Civilization 4 and the screen went blue. Yes the dreaded blue screen, but no error messages on the screen or anything. Just a solid blue screen. The computer didn't respond to anything so I pushed the power button on the case. Well upon restarting nothing happens. Just a blank screen. No MB splash screen or anything. Everything is powered up and I can hear the hard drive spinning, but nothing is on the screen.
View 2 Replies
View Related
Jun 30, 2005
When booting PC up, there is a problem with URLMON.DLL, i took the harddrive out and copied over the file, and was given information that some other DLL files were damaged also, i painstakingly copied the files over, untill it booted up, ran all the scans I could - MS AntiSpy, Adaware, Norton AV, and Norton WinDoctor, Spy Subtract. Rebooted the computer and the First URLMON.DLL error message came up and would not allow me back into windows.
View 3 Replies
View Related
Apr 1, 2006
I turned on my PC this morning to find it would restart after the Windows Loading screen and give me the list of safe mode, etc. I went into safe mode but it done the same. This is also the case for all of the other options, including last configuration. The previous night I received a BSOD (Blue screen of death) and there was a count up showing memory dump to hard drive. I read the instructions and as it said it was my first event and so I restart. However, I did restart when the counter was at around 34. Im guessing thats really a % and I should have waited until 100%?
View 3 Replies
View Related
Jan 2, 2006
When I boot my computer up my computer is freezing up once in a while at the loading screen with the blue loading bar. The bar goes across about three times and the on the fourth time it stops and freezes and nothing happens after that. Once in awhile it will go to a blue error screen witht the following codes: 0x0000008E (0xC0000005, 0xF9787C09, 0xF9677FE8, 0x00000000).
View 7 Replies
View Related
Oct 18, 2006
My dad installed some program on his computer, didn't like it, and uninstalled it. After that, his computer crashed and I haven't been able to get passed the screen with Windows XP Professional and the moving blue bar and then it freezes. Last Good Configuration doesn't work; it ends up at the same place and the blue bar stops also. I System Restored it to the day before he installed the program; once again, the blue bar stops moving.Could this be a hardware issue? Virus (unlikely)?
View 6 Replies
View Related
Nov 3, 2009
The issue started when I went into msconfig and checked 'safe mode' in boot.ini. I restarted my computer and every time it would get to the Windows XP loading screen it would get The Blue Screen. I fixed this issue by putting in the Windows CD and clicked repair.
View 11 Replies
View Related
Sep 12, 2009
i just recently reinstalled windows xp on an old computer i had become corrupted and i had to reinstall it and now it boots up fine but during the loading screen it goes blue screen idk ive tried to reinstall the os again and still the same any advice it an hp pavilion 514c
View 1 Replies
View Related
Jun 15, 2005
i boot up useing xp pro cd and it stops loading at pci ide bus driver, then shows the file intelide.sys is corrupted , says setup failed, have no idea can it be replace with a good one and how would i do it. it alredy has win xp pro but is unusable, shows no modem even in control pannel, when i open modems nothing happens.
View 1 Replies
View Related
Aug 21, 2009
I've run across an unusual (to me) boot problem and it is frustrating. You'd think after more than 20 years of working with (and building my own) computers, I'd have seen just about everything, but this is a new one for me.I'm running XP with SP2 installed. I won't install SP3 because I've seen it cause too much trouble on other systems and won't subject mine (or myself) to that mess. I'm not a big Windows fan (and each new version leaves me less of a fan). I learned computers on a CPM system then promptly fell in love with DOS and still prefer it.
I developed a freeze problem about a week ago. When it continued on a daily basis, I started uninstalling software, starting with the most-recently installed. The freeze problem worsened. Eventually the system would begin to load XP, but in the process of loading my desktop items, it would reboot. Got caught in a vicious reboot cycle for a bit. Wouldn't even stabilize long enough for me to disable my desktop items and wouldn't allow me to boot to Safe Mode.Eventually, chkdsk would run (on startup) through steps 1 and 2. Step 3 would show "unspecified error", and XP would boot. Unsuccessfully.
View 3 Replies
View Related
Oct 3, 2008
my names Neil and I'm from Washington state, Ive had problems trying to install xp pro on my computer. Let's see so far ive tried everything from different hard drives to taking out all hardware not needed. I've even went online and downloaded killdisk to reformat my drives so that they are completely reformatted. Let's see...every time I try to install xp pro this is what i do. First I go into the bios and redirect the the cd to main boot then my hard drive then my floppy, in that order. I reboot my computer with the xp disc in the drive. Following that I create a new partition and begin the install, it installs all of the files it needs to run xp setup, then it comes to the screen that says it has to reboot, it does and then it comes to "hit any button to boot from cd" I dont hit anything. It continues to the next screen, the loading xp screen, and it always stops loading there and freezes. If someone can help that would be great! Itz driving me crazy, and I really really want to fix this pc myself, instead of bringing it to a comp shop.
View 12 Replies
View Related
Apr 12, 2010
I am helping a fellow photographer friend with his computer. He has a 6-mo old PowerSpec from Micro Center. It has a Q9550 CPU. Motherboard is an MSI N6 with nVidia chipset. XP-ProSoftware loaded: MS Office Suit. Kaspersky IS 2010. Quickbook. Photoshop CS3. Blackberry Desktop Manager During boot upon arrival to the desktop, all the icons finished loading within 15-seconds. HDD stops scratching. Everything is idle under processes. 2-minutes later, NIC will load
View 7 Replies
View Related
Jan 27, 2010
I have successfully created a USB installation routine for Windows XP using Multiboot.cmd. The problem i am having is that the installation works perfectly on evry machine i have tried it on apart from Dell machines.
It gets as far as Setup is Starting Windows (after loading in all the background drivers) and then Blue Screens with error 0x0000007b. I have scoured the internet and found nothing of any use on this error code.
It does state that when installing from USB to ensure that no other USB devices are plugged in but the mouse and keyboard themselves are USB devices.
View 28 Replies
View Related
