My computer froze so I tried to restart my computer by turning it off from the tower. I waited for the screen to pop up letting me know that it restarted okay, But it never came up just stopped at the windows XP loading screen. I waited for it to go but it just sat there. The blue bar was moving but it never loaded all the way. So I turned it off once again by the tower and I got a black screen to pop up that told me to restart in a few ways such as
After using my PC for a while - the screen goes off (and the light goes on orange, like on standby) any music playing stops and there is nothing to do except restart. Upon restarting, the BIOS screen is scrambled and the the XP loading screen is messed up and it just goes to a black screen.I have to turn the PC off. Upon turning the PC on again it does the same. I turn off the power supply, wait a while and power up and everything is fine again. untill it does it all over again.I started experiencing this problem on Monday and it's happened once each day. I haven't got a clue what could be causing it? The PC has an ASRock Board, 2.8Ghz AMD Athlon, 512MB RAM, GeForce5200 128MB. It runs pretty well.but now this.
The other night I was on my computer when some strange things began to happen. Any program I tried to open would not open, and then the shortcuts on my desktop changed icons to the folder icon and the text dissapeared. I couldn't do anything, so I just figured it was some freak bug or something. I couldn't run any spyware or virus programs because it wouldn't let me open any programs. So I try to shut it down, and no matter how many times I clicked on shut down I still had to hold the button in to shut it off. Now, when I restart my computer, it seems to load just fine but when it gets to the blue screen with the windows xp logo on it, it just stops. The mouse cursor is there and I can move it but it never gets past the blue screen. I tired loading it in safe mode and it loads all the files up through mup.sys, which I have learned is the last file that loads so it is something after that. I have tried to start it using the last good configuration and still no luck. Any ideas? Do you think it is spyware/virus or just a corrupt system file?
generic cp system is on wireless network Netgear and broadband cable modem Dell laptop connected to network, not affected. Brother all in one printer connected, not affected.
I have recently used Driver Genius to update some drivers and had a power outage while installing the video card drivers. After the power was restored I could not boot normally (it would go blank after the loading screen goes away before the log on screen comes up.) So I boot into safe mode and install the drivers there, and then restart. It worked after about 12 tries. Now, it will not load normally at all anymore.While checking the system error logs, I find that (from 9/26/09 - 9/27/09) I am missing quite a few catalog files in the "system32CatRoot{F750E6C3-38EE-11D1-85E5-00C04FC295EE}" directory.
my comp keep on restarting itself even i didnt use anythg.then also hang on windows loading screen and restart when reach windows loading screen.even how many times i reformat n reinstall windows xp.problem still ocurr.then i sent my comp 2 shop and check.they said no hardware problems.but i doubt it.what can i do?
Today I decided to do a system restore on my HP desktop computer. It was running painfully slow, to many un-needed programs etc. So I backed up all the files that I needed to keep and save to my external hard drive. The computer did not come with an operating disk so the only way I could get it back to sorta normal is to do the system restore. After I backed up all my files I restarted the computer and pressed F11 or 12 cant remember the one for system recovery/restore. About 12 seconds into the restore/recovery thing I accidentally hit the power switch under the table When I turned the computer back on I presses the F11 button again and this time made sure nothing bad happened. After it completed its task I clicked OK and restarted the computer.
I have a gigaware 4 port usb 2.0 high speed hub.I used it to plug 4 joysticks in my computer,its been working for a year.all of a sudden today it just stops working.i tried unplugging it and replugging it back in and i keep getting an error message saying "USB Device not Recognized" Is there anyway I can fix this problem?if i plug the logitech joystick into the usb port it works with no problem. I have windows xp.i tried restarting the computer but it doesn't work.
i boot up useing xp pro cd and it stops loading at pci ide bus driver, then shows the file intelide.sys is corrupted , says setup failed, have no idea can it be replace with a good one and how would i do it. it alredy has win xp pro but is unusable, shows no modem even in control pannel, when i open modems nothing happens.
I've run across an unusual (to me) boot problem and it is frustrating. You'd think after more than 20 years of working with (and building my own) computers, I'd have seen just about everything, but this is a new one for me.I'm running XP with SP2 installed. I won't install SP3 because I've seen it cause too much trouble on other systems and won't subject mine (or myself) to that mess. I'm not a big Windows fan (and each new version leaves me less of a fan). I learned computers on a CPM system then promptly fell in love with DOS and still prefer it.
I developed a freeze problem about a week ago. When it continued on a daily basis, I started uninstalling software, starting with the most-recently installed. The freeze problem worsened. Eventually the system would begin to load XP, but in the process of loading my desktop items, it would reboot. Got caught in a vicious reboot cycle for a bit. Wouldn't even stabilize long enough for me to disable my desktop items and wouldn't allow me to boot to Safe Mode.Eventually, chkdsk would run (on startup) through steps 1 and 2. Step 3 would show "unspecified error", and XP would boot. Unsuccessfully.
my names Neil and I'm from Washington state, Ive had problems trying to install xp pro on my computer. Let's see so far ive tried everything from different hard drives to taking out all hardware not needed. I've even went online and downloaded killdisk to reformat my drives so that they are completely reformatted. Let's see...every time I try to install xp pro this is what i do. First I go into the bios and redirect the the cd to main boot then my hard drive then my floppy, in that order. I reboot my computer with the xp disc in the drive. Following that I create a new partition and begin the install, it installs all of the files it needs to run xp setup, then it comes to the screen that says it has to reboot, it does and then it comes to "hit any button to boot from cd" I dont hit anything. It continues to the next screen, the loading xp screen, and it always stops loading there and freezes. If someone can help that would be great! Itz driving me crazy, and I really really want to fix this pc myself, instead of bringing it to a comp shop.
I am helping a fellow photographer friend with his computer. He has a 6-mo old PowerSpec from Micro Center. It has a Q9550 CPU. Motherboard is an MSI N6 with nVidia chipset. XP-ProSoftware loaded: MS Office Suit. Kaspersky IS 2010. Quickbook. Photoshop CS3. Blackberry Desktop Manager During boot upon arrival to the desktop, all the icons finished loading within 15-seconds. HDD stops scratching. Everything is idle under processes. 2-minutes later, NIC will load
The past few days I've been having issues with my desktop where when I turn it on, it runs through BIOS, and then begins to boot windows xp, but after maybe 10-15 seconds of loading windows xp, the loading bar beneath the Windows XP logo (it has three little blue boxes that move from left to right) will just stop moving. If I reset the computer it then asks to go into normal booting, or safe mode, safe mode booting always works but even when I system restore it doesnt seem to work. Out of maybe 50 times where the loading bar has crashed, its only properly loaded about two or three times.
I have successfully created a USB installation routine for Windows XP using Multiboot.cmd. The problem i am having is that the installation works perfectly on evry machine i have tried it on apart from Dell machines.
It gets as far as Setup is Starting Windows (after loading in all the background drivers) and then Blue Screens with error 0x0000007b. I have scoured the internet and found nothing of any use on this error code.
It does state that when installing from USB to ensure that no other USB devices are plugged in but the mouse and keyboard themselves are USB devices.
I have a problem with Win XP not loading. It stops during the loading process. It does not matter if I try a normal boot, any of the safe mode boots or boot from a startup disk. I know what he problem and what the for the problem is, but I do not know how to accomplish the fix. The problem is caused by a corrupted driver file (agp440.sys). This is for video. If I do a normal boot it stops at tis file. The fix is to disable the file. But to do that I have to have Win loaded. I need a utility that will by pass the Win boot process and give me access to the files on the HDD so I can disable the agp440.sys file. I cannot find such a utility.
Some startup/recovery disks claim to not use Win to boot, but the one's I have tried stop installing at the same place Win XP stops, at the agp440.sys file. MS has a KB for the problem, but it requires being able to access the files on the HDD and disable the agp440.sys file. I could take the HDD out and connect it to another box to do the disabling, but I currently do not have another box. I an in a remote location without easy access to another computer. how I can make the repair without erasing the HDD, reformatting it and reinstalling everything?
I have windows XP Professional edition with Service pack 2 I am not able to login to windows..on login screen when I enter my password it shows Loading Presonal Settings..after that Logging off and again Login screen.
Whenever I try to install something, the window that shows thats its installing closes and installation stops. I restart the install, but it keeps on closing and at different times.
ok so here is the story i have raid 0 array 2 x 160 WD and my windows is installed on it i recently bought 2 x 640 Samsung F1 i built a new raid 0 array and i'm trying to move my windows instalation from one array to another I used Norton's Ghost Disk Copy method . And now when i boot from the new array windows stop right before the user selection screen .the thing is the computer doesn't stop responing .. i can still move my mouse but the user selection screen never show's up i tried reading the windows system log from the new partition with and little utility and it doesn't seem to be any thing wrong.I also tried booting from the windows cd but when it get to the part where is supose to detect hard drives i get the infamous x0000007B stop error
I have a new bare bones Tower. When I try to install Windows XP Pro 1 - 2CPU OEM version 2002 everything goes fine until the "Install devices" sequence when the progress bar gets just over half way across it stops and the BLU screen appears. Cpu fan and two case fans. The other related verbage is... possible HD problem or recently installed devices should be disconnected. I tried a Dell reinstall windows XP Home edition SP1 also with no luck either. The Software is Authentic and has Halogram product key sticker purchase new by me. My thought is there are driver problems between the older software and the newer equipt but am hesitent to buy new version SP3.
First I see the two startup screens, then the windows logo screen, then a flash of a blue screen for an instant and back to the startup screen again. Over and over. I tried to repair xp using the method suggested in information week (Langa Letters)
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
I have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal. It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
My dads pc was fine then all of the sudden it just restarted.And it came up to the options:restart in safe mode estart in safemode with networking estart in safe mode with networking Last known working config Normal But when he tries any of them.. None of them work The windows loading screen will come up flash a blue screen super fast (cannot read it no matter how hard i try) then go back to boot option screen.
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
When I turn on my computer, everything seems to be going fine... the manufacturer's screen comes up, then the screen that shows Windows is loading, then it kindof gets stuck between the loading screen and the welcome screen. It just goes black. The hard drive will run continually as if it's searching for the rest of the information, but can't find it.
When I load windows, it gets up to the loading screen, stays on for a second, or less, and then just the screen blanks out and restarts again...This is after my first PC build. THe Harddrive is detected fine...(its also the one i used from the old computer I had...) What can i do for this?
After that I shutdown my laptop and when i try to restart,all lights are glowing in my laptop,but it is not restarting.The screen is still black and no error messages.I have to try again and again power off and power on the laptop,then after 5 or 6 times I try this,then it is restarting.
I bought the an authentic XP Pro OS. The first two or three days was Ok, but now when I need to restart this message appear: AMERICAN MEGATRENDS - www.ami.com - Sec Master Hard Disk: S.M.A.R.T. Status Bad Backup and replace - Press F1 to Resume. After I press F1 the machine goes black and I can do nothing to take back. The only thing that I can do in order to make windows open is to restart again and after do all the process mention before and press F1 is press many times a message to choose windows XP and then enter and Windows starts. But is not open normal.
this problem started out of the blue one day i turn on my laptop and everything is fine ... but once it gets to the "boot screen" (the one that has the windows logo and the loading bar) the thing turns slow and it stays on that screen for at least 5 minutes, after that, the whole windows startup takes another 5 minutes... to finally end up with a slow working computer. it's slow but it still works alright but once i try to open wmp or itunes to listen to music or even watch videos from Internet, the whole cpu usage goes to 100% and the song starts skipping and "lagging" and the computer works slower than usual.
The issue started when I went into msconfig and checked 'safe mode' in boot.ini. I restarted my computer and every time it would get to the Windows XP loading screen it would get The Blue Screen. I fixed this issue by putting in the Windows CD and clicked repair.
