Loading Screen Come Flash Blue Screen - Working Configuration
Oct 18, 2006
My dads pc was fine then all of the sudden it just restarted.And it came up to the options:restart in safe mode estart in safemode with networking estart in safe mode with networking Last known working config Normal But when he tries any of them.. None of them work The windows loading screen will come up flash a blue screen super fast (cannot read it no matter how hard i try) then go back to boot option screen.
View 3 Replies
ADVERTISEMENT
Oct 5, 2010
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
View 7 Replies
View Related
Nov 18, 2006
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies
View Related
May 24, 2007
So I was surfing the net, when I got the dreaded BSOD, so I restarted my machine, and the flash screen cameup okay, at first, after the flash screen, it was saying
"Loading descriptor for PBR 2...done Disk Read error Press control, alt, delete ro restar now it is saying"Loading descriptor for PBR 4...done
View 14 Replies
View Related
Nov 3, 2009
The issue started when I went into msconfig and checked 'safe mode' in boot.ini. I restarted my computer and every time it would get to the Windows XP loading screen it would get The Blue Screen. I fixed this issue by putting in the Windows CD and clicked repair.
View 11 Replies
View Related
Sep 12, 2009
i just recently reinstalled windows xp on an old computer i had become corrupted and i had to reinstall it and now it boots up fine but during the loading screen it goes blue screen idk ive tried to reinstall the os again and still the same any advice it an hp pavilion 514c
View 1 Replies
View Related
Nov 29, 2006
I have a Toshiba Tecra M2V-S310 laptop PC with Windows XP. A week ago I inserted flash drive into my USB port to drag something from his drive. My laptop choked a bit, slowed down and I got an error sound, so I pulled the drive out immediately. A few days later, I started getting the random Blue Screen Of Death with the message IRQL_NOT_LESS_OR_EQUAL, at which point I am forced to restart. I see an Unknown Device in my Device Manager, and after doing some reading up online about this problem I see that it is sometimes caused by something to do with not fully installing new hardware, I assume this has a lot to do with the problem. As a temporary fix I always uninstall the Unknown Device every time the Blue Screen Of Death forces me to restart, which buys me an extra 45 minutes or so of laptop time, but every time I am eventually but inevitably forced to restart, I got back to the Device Manager and lo and behold the Unknown Device has returned, along with a prompt on my desktop to Install New Hardware.
I am not able to plug in the flash drive that supposedly started this problem to uninstall it properly, so that's not an option.Someone suggested I delete all the icons in my Universal Serial Bus section of Device Manager, so that the necessary ones would automatically reinstall themselves and the erroneous one wouldn't. Only problem is, everything reinstalled - the valid icons and the erroneous one as well. Back to square one. Someone else suggested that my USB port might be fried, and that the only recourse is to get a new one. If that's the case I'm willing and ready to get a new one, but I'd like to exhaust all other options before I go there,
View 1 Replies
View Related
Nov 28, 2006
I have a Toshiba Tecra M2V-S310 laptop PC with Windows XP. A week ago I inserted flash drive into my USB port to drag something from his drive. My laptop choked a bit, slowed down and I got an error sound, so I pulled the drive out immediately. A few days later, I started getting the random Blue Screen Of Death with the message IRQL_NOT_LESS_OR_EQUAL, at which point I am forced to restart. I see an Unknown Device in my Device Manager, and after doing some reading up online about this problem I see that it is sometimes caused by something to do with not fully installing new hardware, I assume this has a lot to do with the problem. As a temporary fix I always uninstall the Unknown Device every time the Blue Screen Of Death forces me to restart, which buys me an extra 45 minutes or so of laptop time, but every time I am eventually but inevitably forced to restart, I got back to the Device Manager and lo and behold the Unknown Device has returned, along with a prompt on my desktop to Install New Hardware.
I am not able to plug in the flash drive that supposedly started this problem to uninstall it properly, so that's not an option.Someone suggested I delete all the icons in my Universal Serial Bus section of Device Manager, so that the necessary ones would automatically reinstall themselves and the erroneous one wouldn't. Only problem is, everything reinstalled - the valid icons and the erroneous one as well. Back to square one. Someone else suggested that my USB port might be fried, and that the only recourse is to get a new one. If that's the case I'm willing and ready to get a new one, but I'd like to exhaust all other options before I go there,
View 6 Replies
View Related
Apr 7, 2007
I was attempting to get the flash player to work and did all kind of things. But before I started, I created a restore point and exported the registry.The last thing I recall doing was a manual install of the latest flash player. Seems like it hung up and after a few minutes I turned off the PC by holding in on the power button.When I power up the PC it would get to the blue screen with the windows XP logo screen and then hang.Normally it took me to a screen showing the various users on the PC.I have rebooted in the safe mode and it gets to the same screen and hangs up.
View 7 Replies
View Related
Oct 9, 2009
When ever I put my flash drive in USB port, my computer shuts down and a blue screen appears, and in that blue screen it says that for protection of computer will be shut down in so and so minute, but when I use the same drive at work I have no problem with the drive neither with computer, Is there anything wrong with my computer?
View 1 Replies
View Related
Oct 8, 2008
My laptop will not boot into windows at all. not into safe mode, or any other option i'm given. It gets to the windows logo and crashes, a quick flash of a bluescreen which i can't see the error, and restarts. I also do not have the option to disable the restart so i can see this code too.I booted the windows recovery and at the DOS prompt i tried doing chckdsk, fixboot, fixmbr.
View 3 Replies
View Related
Mar 8, 2010
New to this site so go easy on me,please! I've been through the site looking for an answer to my problem with no luck so here goes:I am trying to reformat my drive by starting over with my XP disc. After initiating install from the CD all goes well with the boot (loads drivers, and configures devices,etc). When it tries to load Windows I get a blue screen that says:error problem has been detected and windows has shut down.If this is the first time you've seen this stop error screen, restart, if not , follow these steps. Check for viruses. remove any newly installed drives or hard drives. check that the hard drive is configured properly. Run CHKDSK/F to check for corruption, then restart.
View 4 Replies
View Related
Jul 30, 2008
so when i start my computer everything goes fine until, the windows xp screen comes up when it loads then the bar freezes and a blue screen pops up saying."check for any viruses. remove any newly installed hard drives or hard drive controllers check your hardrive to make sure it is properly configured and terminated. it also says to check for hardrive corruption.the strange thing is, is that i can run bart pe tools and access my hardrive but i cant start my computer regular idk.
View 1 Replies
View Related
Jul 5, 2005
Yesterday, I acquired the "istsvc" spyware, and could not get rid of it. I ran an anti-spyware program, and it said it would run again when I restarted my computer to finish the job. I restarted my computer, and it never finished booting. It goes to the black screen with the Windows logo and the blue scrolling line just fine. Then it goes to the light blue screen with the dark blue borders and the words Microsoft Windows XP in the middle, and just stops. I know it is not frozen because there is a mouse pointer on-screen that I can still move. It stops at this same point no matter what mode I try to load in. I am using XP Home SP2.
View 3 Replies
View Related
Feb 18, 2006
First I run Windows 2000 and keep it updated as much as Microsoft releases updates. I also reguarly run anti-virus, anti-spyware, defrag, etc. The problem started 2 weeks ago when I booted the computer it showed the MB splash screen and then instead of the 2000 loading screen it just showed "Error loading OS." in the top left. Well I figured the hard drive was going so I pulled it out, blew it off, tapped on it, checked connections and stuck it back in. Rebooted and everything seemed fine and has the past 2 weeks. Well today I was playing Civilization 4 and the screen went blue. Yes the dreaded blue screen, but no error messages on the screen or anything. Just a solid blue screen. The computer didn't respond to anything so I pushed the power button on the case. Well upon restarting nothing happens. Just a blank screen. No MB splash screen or anything. Everything is powered up and I can hear the hard drive spinning, but nothing is on the screen.
View 2 Replies
View Related
Jun 30, 2005
When booting PC up, there is a problem with URLMON.DLL, i took the harddrive out and copied over the file, and was given information that some other DLL files were damaged also, i painstakingly copied the files over, untill it booted up, ran all the scans I could - MS AntiSpy, Adaware, Norton AV, and Norton WinDoctor, Spy Subtract. Rebooted the computer and the First URLMON.DLL error message came up and would not allow me back into windows.
View 3 Replies
View Related
Mar 18, 2006
The other night I was on my computer when some strange things began to happen. Any program I tried to open would not open, and then the shortcuts on my desktop changed icons to the folder icon and the text dissapeared. I couldn't do anything, so I just figured it was some freak bug or something. I couldn't run any spyware or virus programs because it wouldn't let me open any programs. So I try to shut it down, and no matter how many times I clicked on shut down I still had to hold the button in to shut it off. Now, when I restart my computer, it seems to load just fine but when it gets to the blue screen with the windows xp logo on it, it just stops. The mouse cursor is there and I can move it but it never gets past the blue screen. I tired loading it in safe mode and it loads all the files up through mup.sys, which I have learned is the last file that loads so it is something after that. I have tried to start it using the last good configuration and still no luck. Any ideas? Do you think it is spyware/virus or just a corrupt system file?
View 11 Replies
View Related
Apr 1, 2006
I turned on my PC this morning to find it would restart after the Windows Loading screen and give me the list of safe mode, etc. I went into safe mode but it done the same. This is also the case for all of the other options, including last configuration. The previous night I received a BSOD (Blue screen of death) and there was a count up showing memory dump to hard drive. I read the instructions and as it said it was my first event and so I restart. However, I did restart when the counter was at around 34. Im guessing thats really a % and I should have waited until 100%?
View 3 Replies
View Related
Jan 2, 2006
When I boot my computer up my computer is freezing up once in a while at the loading screen with the blue loading bar. The bar goes across about three times and the on the fourth time it stops and freezes and nothing happens after that. Once in awhile it will go to a blue error screen witht the following codes: 0x0000008E (0xC0000005, 0xF9787C09, 0xF9677FE8, 0x00000000).
View 7 Replies
View Related
Oct 18, 2006
My dad installed some program on his computer, didn't like it, and uninstalled it. After that, his computer crashed and I haven't been able to get passed the screen with Windows XP Professional and the moving blue bar and then it freezes. Last Good Configuration doesn't work; it ends up at the same place and the blue bar stops also. I System Restored it to the day before he installed the program; once again, the blue bar stops moving.Could this be a hardware issue? Virus (unlikely)?
View 6 Replies
View Related
Jun 13, 2008
When i turn it on I get the 'Windows did not restart properly screen'and no matter which of the options I choose, i see the windows logo loading after a short time the blue screen apears for a split second and then its back to the first screen all over again.
iv gone into BIOS, i ran the HD self test, and both the short and long test fail before really even doing anything.
View 1 Replies
View Related
Nov 22, 2006
running on windows XP SP2 & the mouse would not work so i tried my mouse in the USB port and in the ps/2 port and it still did not work. When i checked in device manager everything looked ok but i could not access the mouse properties in the control panel also when i tried a spyware scan it kept crashing as soon as it found a infection.
So i formatted the hard drive to NTFS and tried reinstalling windows it got halfway though and i got a stop error message (Blue screen of death). IRQL_NOT_LESS_OR_EQUAL STOP: 0x0000000A (0xFFBE0000, 0X00000001, 0X00000000, 0X80825254)
View 7 Replies
View Related
Nov 12, 2006
im new I have a Toshiba Equium EA60-173 PSA67E-00700C8J.Im having often reoccuring problems almost as soon as i reboot my laptop freezes and a blue screen appears saying the ati2davg display driver is stuck in an infinate loop. and my laptop has to be rebooted, also it freezes and changes to the lowest display settings and a window appears saying the display driver it has stopped working properly. I need advise on how to sort this as its very annoying, my laptop also over heats, gets very hot and just turns itself off. the fan constantly runs.
View 27 Replies
View Related
May 9, 2007
I have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal.
It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
View 1 Replies
View Related
Nov 22, 2006
When I turn on my computer, everything seems to be going fine... the manufacturer's screen comes up, then the screen that shows Windows is loading, then it kindof gets stuck between the loading screen and the welcome screen. It just goes black. The hard drive will run continually as if it's searching for the rest of the information, but can't find it.
View 4 Replies
View Related
Dec 31, 2005
When I load windows, it gets up to the loading screen, stays on for a second, or less, and then just the screen blanks out and restarts again...This is after my first PC build. THe Harddrive is detected fine...(its also the one i used from the old computer I had...) What can i do for this?
View 9 Replies
View Related
Feb 16, 2006
My computer is stuck on the boot screen, the mouse is lit up as to be working the keyboard flashed its lights as it always does when you boot but then everything seems to stop there. the screen is stuck on the boot screen the keyboard doesnt seem to work (lights are gone and wont come back on.) the lights on the back of the computer (the yellow and green ones) are all yellow but one. The C light is green. they are a steady color. Not blinking. A,B,D are all yellow.
View 3 Replies
View Related
Jan 19, 2007
My laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
View 7 Replies
View Related
Jul 17, 2005
when I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?
View 3 Replies
View Related
Jan 18, 2008
I have a celeron/p4 machine with 256 RAM and 160 G Hard Disk. Well i installed a service pack 2 for xp. After installing my screen freezed so i restarted the pc and I got a blue screen. What can i do please?
View 1 Replies
View Related
Jun 20, 2008
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies
View Related
