i just recently reinstalled windows xp on an old computer i had become corrupted and i had to reinstall it and now it boots up fine but during the loading screen it goes blue screen idk ive tried to reinstall the os again and still the same any advice it an hp pavilion 514c
View 1 RepliesToshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
My dads pc was fine then all of the sudden it just restarted.And it came up to the options:restart in safe mode estart in safemode with networking estart in safe mode with networking Last known working config Normal But when he tries any of them.. None of them work The windows loading screen will come up flash a blue screen super fast (cannot read it no matter how hard i try) then go back to boot option screen.
View 3 Replies View RelatedI couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies View RelatedThe issue started when I went into msconfig and checked 'safe mode' in boot.ini. I restarted my computer and every time it would get to the Windows XP loading screen it would get The Blue Screen. I fixed this issue by putting in the Windows CD and clicked repair.
View 11 Replies View RelatedNew to this site so go easy on me,please! I've been through the site looking for an answer to my problem with no luck so here goes:I am trying to reformat my drive by starting over with my XP disc. After initiating install from the CD all goes well with the boot (loads drivers, and configures devices,etc). When it tries to load Windows I get a blue screen that says:error problem has been detected and windows has shut down.If this is the first time you've seen this stop error screen, restart, if not , follow these steps. Check for viruses. remove any newly installed drives or hard drives. check that the hard drive is configured properly. Run CHKDSK/F to check for corruption, then restart.
View 4 Replies View Relatedso when i start my computer everything goes fine until, the windows xp screen comes up when it loads then the bar freezes and a blue screen pops up saying."check for any viruses. remove any newly installed hard drives or hard drive controllers check your hardrive to make sure it is properly configured and terminated. it also says to check for hardrive corruption.the strange thing is, is that i can run bart pe tools and access my hardrive but i cant start my computer regular idk.
View 1 Replies View RelatedYesterday, I acquired the "istsvc" spyware, and could not get rid of it. I ran an anti-spyware program, and it said it would run again when I restarted my computer to finish the job. I restarted my computer, and it never finished booting. It goes to the black screen with the Windows logo and the blue scrolling line just fine. Then it goes to the light blue screen with the dark blue borders and the words Microsoft Windows XP in the middle, and just stops. I know it is not frozen because there is a mouse pointer on-screen that I can still move. It stops at this same point no matter what mode I try to load in. I am using XP Home SP2.
View 3 Replies View RelatedFirst I run Windows 2000 and keep it updated as much as Microsoft releases updates. I also reguarly run anti-virus, anti-spyware, defrag, etc. The problem started 2 weeks ago when I booted the computer it showed the MB splash screen and then instead of the 2000 loading screen it just showed "Error loading OS." in the top left. Well I figured the hard drive was going so I pulled it out, blew it off, tapped on it, checked connections and stuck it back in. Rebooted and everything seemed fine and has the past 2 weeks. Well today I was playing Civilization 4 and the screen went blue. Yes the dreaded blue screen, but no error messages on the screen or anything. Just a solid blue screen. The computer didn't respond to anything so I pushed the power button on the case. Well upon restarting nothing happens. Just a blank screen. No MB splash screen or anything. Everything is powered up and I can hear the hard drive spinning, but nothing is on the screen.
View 2 Replies View RelatedWhen booting PC up, there is a problem with URLMON.DLL, i took the harddrive out and copied over the file, and was given information that some other DLL files were damaged also, i painstakingly copied the files over, untill it booted up, ran all the scans I could - MS AntiSpy, Adaware, Norton AV, and Norton WinDoctor, Spy Subtract. Rebooted the computer and the First URLMON.DLL error message came up and would not allow me back into windows.
View 3 Replies View RelatedThe other night I was on my computer when some strange things began to happen. Any program I tried to open would not open, and then the shortcuts on my desktop changed icons to the folder icon and the text dissapeared. I couldn't do anything, so I just figured it was some freak bug or something. I couldn't run any spyware or virus programs because it wouldn't let me open any programs. So I try to shut it down, and no matter how many times I clicked on shut down I still had to hold the button in to shut it off. Now, when I restart my computer, it seems to load just fine but when it gets to the blue screen with the windows xp logo on it, it just stops. The mouse cursor is there and I can move it but it never gets past the blue screen. I tired loading it in safe mode and it loads all the files up through mup.sys, which I have learned is the last file that loads so it is something after that. I have tried to start it using the last good configuration and still no luck. Any ideas? Do you think it is spyware/virus or just a corrupt system file?
View 11 Replies View RelatedI turned on my PC this morning to find it would restart after the Windows Loading screen and give me the list of safe mode, etc. I went into safe mode but it done the same. This is also the case for all of the other options, including last configuration. The previous night I received a BSOD (Blue screen of death) and there was a count up showing memory dump to hard drive. I read the instructions and as it said it was my first event and so I restart. However, I did restart when the counter was at around 34. Im guessing thats really a % and I should have waited until 100%?
View 3 Replies View RelatedWhen I boot my computer up my computer is freezing up once in a while at the loading screen with the blue loading bar. The bar goes across about three times and the on the fourth time it stops and freezes and nothing happens after that. Once in awhile it will go to a blue error screen witht the following codes: 0x0000008E (0xC0000005, 0xF9787C09, 0xF9677FE8, 0x00000000).
View 7 Replies View RelatedMy dad installed some program on his computer, didn't like it, and uninstalled it. After that, his computer crashed and I haven't been able to get passed the screen with Windows XP Professional and the moving blue bar and then it freezes. Last Good Configuration doesn't work; it ends up at the same place and the blue bar stops also. I System Restored it to the day before he installed the program; once again, the blue bar stops moving.Could this be a hardware issue? Virus (unlikely)?
View 6 Replies View RelatedWhen i turn it on I get the 'Windows did not restart properly screen'and no matter which of the options I choose, i see the windows logo loading after a short time the blue screen apears for a split second and then its back to the first screen all over again.
iv gone into BIOS, i ran the HD self test, and both the short and long test fail before really even doing anything.
I have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal.
It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
When I turn on my computer, everything seems to be going fine... the manufacturer's screen comes up, then the screen that shows Windows is loading, then it kindof gets stuck between the loading screen and the welcome screen. It just goes black. The hard drive will run continually as if it's searching for the rest of the information, but can't find it.
View 4 Replies View RelatedWhen I load windows, it gets up to the loading screen, stays on for a second, or less, and then just the screen blanks out and restarts again...This is after my first PC build. THe Harddrive is detected fine...(its also the one i used from the old computer I had...) What can i do for this?
View 9 Replies View RelatedMy laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
View 7 Replies View Relatedwhen I turned on my computer and got the blue screen of death, so I restarted my PC. Then a black screen came up saying "Windows could not start beacuse the following file is missing or corrupt : windowssystem32configsystem."
You can attempt to repair this file by putting the winxp cd in etc...
Now when i turn on my computer there is just a black screen showing, with nothing at all on it.
Any ideas?
I have a celeron/p4 machine with 256 RAM and 160 G Hard Disk. Well i installed a service pack 2 for xp. After installing my screen freezed so i restarted the pc and I got a blue screen. What can i do please?
View 1 Replies View RelatedWhen i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies View RelatedI was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
View 2 Replies View RelatedEncountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
View 10 Replies View Relatedi'm having to boot into windows xp. on power up sytem goes through the windows xp splash screen (with progress bar) and then instead of login prompt it goes just into the blue screen with moveable mouse pointer arrow.
issue seems to be similar to:
http://forums.techguy.org/windows-nt...o-startup.html
http://forums.techguy.org/windows-nt...p-problem.html
but recommended solutions didn't help so far.
symptoms just before issue - was not able to run use some system features - utility to turn off the display, utility to bring up battery info - everything was working fine before this
what i've tried:
boot to Last Known Good Configuration - resulting in the same blue screen
boot to Safe Mode / Safe Mode with networking / Safe Mode with comman prompt - resulting in blank (black) screen with "Safe Mode" in the corners and moveable mouse test the hardware (hard drive / memory etc.) via build in PC Doctor - all seems to be working
i am able to use bootable XP CD from other machine to get into Recovery Console
i am able to boot to simple live XP using BartPE-XPE usb key and access the hard drive
I Installed A New Programme Which Was Downloaded From Bit Torrent
Blue Screen - Memory Dump
Rebooted And Now It Just Hangs On Windows Xp Logo Screen.
Tried To Boot Using Safe Mode But No Joy.
Also Tried To Use The Restore Disks And The Xp Disk Itself But It Would Not Boot From Those.
What Do I Do Now? I Dont Want To Format The Drive And Loose All My Files.
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies View RelatedI need some links to some sites that will provide information and also fixes for blue screen errors in Win NT/2000/XP. I will be using them on my website, which in turn will be used at my workplace. Thanks for any help that you can offer.
View 1 Replies View RelatedI have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
When I turned my computer on this morning it starts up but when it gets to the boot screen it gives me a blue screen but my computer instantaniously restarts so i have no idea what it said. What should I do I'm using ERD Commander 2005 and that let me boot into my computer but its limited I've never used ERD Commander before I've tryed a few things but nothing has worked yet
View 6 Replies View RelatedI also have a Blue Screen with the words Spyware Infection. Listed below is a copy of my HijackThis log. Can someone please help me with a fix?
View 10 Replies View Related