Blank Blue Screen With Mouse Arrow After Xp Splash Screen
Oct 21, 2009
i'm having to boot into windows xp. on power up sytem goes through the windows xp splash screen (with progress bar) and then instead of login prompt it goes just into the blue screen with moveable mouse pointer arrow.
issue seems to be similar to:
http://forums.techguy.org/windows-nt...o-startup.html
http://forums.techguy.org/windows-nt...p-problem.html
but recommended solutions didn't help so far.
symptoms just before issue - was not able to run use some system features - utility to turn off the display, utility to bring up battery info - everything was working fine before this
what i've tried:
boot to Last Known Good Configuration - resulting in the same blue screen
boot to Safe Mode / Safe Mode with networking / Safe Mode with comman prompt - resulting in blank (black) screen with "Safe Mode" in the corners and moveable mouse test the hardware (hard drive / memory etc.) via build in PC Doctor - all seems to be working
i am able to use bootable XP CD from other machine to get into Recovery Console
i am able to boot to simple live XP using BartPE-XPE usb key and access the hard drive
Very similar to the following problem but i do not have a raid, and it seems that this PC has a raid and i don't, plus it was never really determined what the actual solution was.
The basics: XP Professional Boot up screen, right before the windows loading screen, or direct after the F8 Menu if you hit "Start Windows Normally..." it will just lock up, no HDD activity, blank screen. now BSOD, nothing.
All 3 safe mods work fine.
Ran chkdsk /r in recovery. Ran proper fixboot procedure.
Went into safe mode and checked the event viewer.
The only concerning message i got was: The following boot-start or system-start driver(s) failed to load: AmdK8 Fips nod32drv
Formatting really isnt an issue since i can back up anything i need through safe mode. However its just the fact that the Windows gremlin has struck me again and i must defeat it once more.
I highly doubt this is a hardware issue as it is more of a driver/software issue.any help?
I recently had my motherboard changed on my Intel Pentium IV 1.6 GHz PC due to some serious problems.Now, I'm again suffering from problems. Once I boot it, POST is displayed, and the Windows splash screen appears. Very often, the screen goes blank. It seems that everything else is working. If I press Alt+F4 followed by a 'u' (To select the 'turn off' button), I hear the Windoze shut-down sound and the computer shuts down.
i just installed a WD Raptor drive and trying to install Windows XP Pro...the install went fine - and my BIOS configurations are set for RAID bootup. I have my other hard drives disconnected and it still wont boot. I have even gone as far as finishing with the Activation/Serial # and user name but when i restarted it boots up and runs through POST fine but the Windows Splash screen --indicating that windows is loading-- doesn't pop up. i know this sounds like i've just done something dumb but i have built several computers and this one is just kickin my.
I have tried looking for a solution on the web for this and I can’t seem to find anything that quite matches my problem. I have a Dell Inspiron 2500 which is a few years old. I have not recently installed anything new onto it or added new hardware or anything, but the other day i switched it on and it appeard to be starting up fine. The Dell screen comes up, the Windows startup splash screen appears then the screen goes blank. The laptop continues to load properly (i think) as you can hear the start up music and everything loading up, but the screen is blank, (tho the colour of it down change to a slight lighter shade of black!).
I have tried outputting to a different monitor - which does exactly the same as the laptop screen - displaying the start-up stuff then blank screen before the login bit. When i start up the laptop in safe mode and VGA mode it works fine. I have tried changin the resolution in these modes to a lower one 600x800 (the refesh rate is set to 60) but this does not solve the problem. I have installed all recommended XP updates, scanned for viruses and spyware but there’s nothing there, tried to use the troubleshooting tools in Help and Support but not really sure what imdoing and it says everything is fine! sort of hardware failure with my graphics card maybe?! Dont know much about that sort of thing.
My computer (Dell Dimension 2350 running Windows XP SP2, no new hardware or software added in years) turns on, asks me if I want to 'Start Windows Normally', 'Last Known Good Config' and 3 different Safe Modes. It doesn't matter which one I pick, it always starts the Windows splash screen, then goes to a black screen with my mouse pointer (which I can move, but cannot right or left click). Also, the keyboard controls don't seem to work, no ctrl+alt+del, nothing (though if I press shift 5 times it gives me the beep atleast letting me know the keyboard is working). Safe Modes do something a little different, but end up in the same place as the other modes. Safe mode will hang on Mup.sys for a long while before it goes to the black screen with the mouse pointer.
When Windows is starting up I get a mostly blank dialog box with an OK button at the bottom after the Windows splash screen disappears, on top of the Windows is starting up screen. The dialog box that contains a small piece of unrecognizable text in the top left corner that changes each time I start computer. Most of the icons on the desktop have changed to the generic I don't know what you are icon and no applications will run including Internet Explorer except the virus program . I get an error message that Windows needs to know what application created that file. (This includes cmd.exe)
The dialog box cannot be closed with the ( X ) in the corner and will only continue to start windows after sitting for about 10 minutes or clicking the OK button. I don't believe it's a virus as the virus program does load and did do a complete scan without finding a virus.
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
I was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
A friend of mine has a year old computer 2.4ghz running XP Pro.Recently the computer had gotten slower and slower and had lots of Popups. Sypbot found 127 bogus things going on.It could not clear all of them.We went into control panel and removed programs and took out a bunch of things that were not operating related programs.Computer was rebooted multiple times. Finally the computer just hangs when it gets to the blue XP screen, and will sit there for hours until rebooted.I have tried ever mode of Safe Mode to boot and I get the same blue XP screen. The mouse can still be moved around.I cannot boot from the CD rom with the XP disks and do not have bootable floppies. I cannot get into the setup screen to change the order of boot.Since this computer was a gift to the person, we do not know the administrator password.
I have been experiencing intermittent bootup problems with Windows XP. When this happens, the XP splash screen appears(blue line scrolling) and then monitor loses signal and reboot occurs. This can cycle several times, even if I choose the option of starting Windows with last known configuration that worked. It always eventually loads and reports that Windows experienced a serious problem.
Turn the computer on, it starts to boot, I see the compaq splash screen then the blue windows is starting. Then it just restarts the process over. I have tried to repair windows: The F8 to last known good config & F8 safe and it just restarts from both of those as well. Win XP SP3 Currently doing this: You can boot from the cd and press R to go to the recovery console. Your best bet is to try running Checkdisk. So once in the recovery console, type chkdsk /r and press enter. It could take from 20 minutes to a couple of hours, depending on the repairs it needs to make
First I run Windows 2000 and keep it updated as much as Microsoft releases updates. I also reguarly run anti-virus, anti-spyware, defrag, etc. The problem started 2 weeks ago when I booted the computer it showed the MB splash screen and then instead of the 2000 loading screen it just showed "Error loading OS." in the top left. Well I figured the hard drive was going so I pulled it out, blew it off, tapped on it, checked connections and stuck it back in. Rebooted and everything seemed fine and has the past 2 weeks. Well today I was playing Civilization 4 and the screen went blue. Yes the dreaded blue screen, but no error messages on the screen or anything. Just a solid blue screen. The computer didn't respond to anything so I pushed the power button on the case. Well upon restarting nothing happens. Just a blank screen. No MB splash screen or anything. Everything is powered up and I can hear the hard drive spinning, but nothing is on the screen.
running on windows XP SP2 & the mouse would not work so i tried my mouse in the USB port and in the ps/2 port and it still did not work. When i checked in device manager everything looked ok but i could not access the mouse properties in the control panel also when i tried a spyware scan it kept crashing as soon as it found a infection.
So i formatted the hard drive to NTFS and tried reinstalling windows it got halfway though and i got a stop error message (Blue screen of death). IRQL_NOT_LESS_OR_EQUAL STOP: 0x0000000A (0xFFBE0000, 0X00000001, 0X00000000, 0X80825254)
My niece installed drivers for a Kodak camera on her HP laptop at the weekend. Everything seemed to go fine until she switched the machine on the next day, when it failed during the boot. She's reasonably tech competent so by the time she called me she'd tried all the safe mode options with no luck: it would get up to mup.sys in the boot and then reset. I did try to access the HP Recovery software, but it just comes up with a pale blue blank screen and a windows-style pointer and stops there.
i have a toshiba laptop with Windows XP home installed the computer loads till where it says Windows Xp home edition after that hte screen goes blank and a blue screen appears and disappears really quick i was wondering if there is any way to fix this
Was working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
Ive done a fair amount of searching online and tried a number of things myself, needless to say, they didnt work.Ok, so here's the issue; When I go to turn on my computer, I make it to the XP splash screen with the 3 blue bubbles moving left to right... But nothing from there.Additionally, between the BIOS screen and the XP splash screen, theres some weird black screen with what looks like a long barcode-esq bar, where a solid white line fills the gaps moving left to right...
Using window xp pro I on computer.I'm using pentium 3..
It's fine loading bios and till window xp logo..
when it starting to load the welcome window screen.. (which it didnt reach the welcome screen at all)
It just stuck at the black screen.. so i try to run in safe mode, weirdly it able to open.. okie
i tried to reformat... but it doesnt seems to work, it happens the same thing..
b4 this happened.. it all started one day.. i let my computer to download some personal stuff.. then computer got hanged, and i just shut the computer just like that..so now, i cant reach the welcome screen at all..
My computer is stuck on the boot screen, the mouse is lit up as to be working the keyboard flashed its lights as it always does when you boot but then everything seems to stop there. the screen is stuck on the boot screen the keyboard doesnt seem to work (lights are gone and wont come back on.) the lights on the back of the computer (the yellow and green ones) are all yellow but one. The C light is green. they are a steady color. Not blinking. A,B,D are all yellow.
When ever i start up windows it get threw the Windows boot screen then whens it suppose to come to the logon screen i see only black for no matter how long i leave it on!, i can still move the mouse, and thats all that happens i have a operating system cd, and if i got to repair windows what config do i type?
How can i change or remove it?? can i do the same with the shutdown screen?? also does anybody know how to get rid of i.e.s icon?? i use avant browser.
I boot my xp machine but it hangs at the xp splash screen.It's not like it's frozen, the blue bar under the "windows" just scrolls and scrolls and scrolls, etc. The same happens when I try booting to VGA mode.I am able to boot to safe mode, just not completely. I get to a screen that says " Safe mode Microsoft (R) Windows XP (R) (Build 2600.xpsp_sp2_gdr.05001-119: Service Pack 2) Safe Mode.I can also see the mouse moving around, just nothing else. Nothing was added, removed or installed.
This problem started several days ago. On restart the XP splash screen loads but freezes as the progress bar is in motion. After rebooting several times it does load to the desktop, but on restarting again it hangs. I have searched reference articles, forums, etc and have found others have the same problem and have narrowed it down to nvidia drivers and hardware conflicts that load after 'mup.sys' in the boot up process.I had installed a nvidia graphics card and driver before this problem began but then uninstalled, deciding to keep the on board sis igp. I have downloaded driver cleaner and removed all traces of the nvidia driver but the problem persists..I am running XP sp2, p4 3ghz, foxconn motherboard, sis 661fx graphics.
My PC has developed a problem and I'm looking a solution. What I'm seeing is that when I boot my PC, it gets to the splash screen and I see the scroller moving but that's it. No color changes no BSOD, etc. At this point, I've been able to restore my system using an Acronis full system recovery but I would like to know what's going on behind the scenes when the progress bar moves but nothing.
I'm getting a BSOD. Everything seems fine--it is at least getting to the boot.ini since I get an OS selection--W2K or the Recovery Console. The W2K splash screen comes up, the blue hash marks scroll about half way across the bottom, halt, then BSOD "INACCESSIBLE_BOOT_DEVICE". I tried the Recovery console, but that BSODs as well. I used ERD to run CHKDSK --- no errors. Possibly the hdd? ERD took a loooong time to read what OSs were on the hdd--five minutes.
i used it all fine about 2 hrs ago and shutted down fine. i just now go 2 boot up and after i get the BEEp, bios screen, it says vereifying dmi pool data for a split ssecond and gives a blak screen for a split and does the Splash. but my issue is, it doesnt give me a splash...it just sits at that blak screen.
When im tryin 2 start her up, after the splash scr een l oads, just as it enters the next stage of boot up it flashes a blu screen and reboots. i cant boot under ANY start up options.
I am new here and I consider myself very knowledgeable on a computer but this one has me pulling my hair out. I have seen posts for similar situations but nothing identical to mine. What I have is a Dell E520 and we had a power serge and the computer shutoff. When the computer was turned back on it P.O.S.T. fine, loaded to splash screen and then once that is done loading I get a blank screen. Nothing. I reset go to safe mode, works fine, loads into safe mode. I try to load safe mode with networking, will not work. So I went back to safe mode and tried to do a system restore, told me it was disables and I would have to go back and enable it in regular mode.
I am running windows XP Home edition with SP2. When starting up it stalls at the XP splash screen with the flashing bar below it. I can start in safe mode but haven't had any luck with the system restore.
