Start Up Splash Screen Appears Blank
Jul 18, 2005
I have tried looking for a solution on the web for this and I can’t seem to find anything that quite matches my problem. I have a Dell Inspiron 2500 which is a few years old. I have not recently installed anything new onto it or added new hardware or anything, but the other day i switched it on and it appeard to be starting up fine. The Dell screen comes up, the Windows startup splash screen appears then the screen goes blank. The laptop continues to load properly (i think) as you can hear the start up music and everything loading up, but the screen is blank, (tho the colour of it down change to a slight lighter shade of black!).
I have tried outputting to a different monitor - which does exactly the same as the laptop screen - displaying the start-up stuff then blank screen before the login bit. When i start up the laptop in safe mode and VGA mode it works fine. I have tried changin the resolution in these modes to a lower one 600x800 (the refesh rate is set to 60) but this does not solve the problem. I have installed all recommended XP updates, scanned for viruses and spyware but there’s nothing there, tried to use the troubleshooting tools in Help and Support but not really sure what imdoing and it says everything is fine! sort of hardware failure with my graphics card maybe?! Dont know much about that sort of thing.
View 9 Replies
ADVERTISEMENT
Nov 25, 2007
I recently had my motherboard changed on my Intel Pentium IV 1.6 GHz PC due to some serious problems.Now, I'm again suffering from problems. Once I boot it, POST is displayed, and the Windows splash screen appears. Very often, the screen goes blank. It seems that everything else is working. If I press Alt+F4 followed by a 'u' (To select the 'turn off' button), I hear the Windoze shut-down sound and the computer shuts down.
View 3 Replies
View Related
Jan 27, 2006
I have been experiencing intermittent bootup problems with Windows XP. When this happens, the XP splash screen appears(blue line scrolling) and then monitor loses signal and reboot occurs. This can cycle several times, even if I choose the option of starting Windows with last known configuration that worked. It always eventually loads and reports that Windows experienced a serious problem.
View 5 Replies
View Related
Oct 7, 2007
Very similar to the following problem but i do not have a raid, and it seems that this PC has a raid and i don't, plus it was never really determined what the actual solution was.
http://forums.techguy.org/windows-nt...oot-black.html
The basics: XP Professional Boot up screen, right before the windows loading screen, or direct after the F8 Menu if you hit "Start Windows Normally..." it will just lock up, no HDD activity, blank screen. now BSOD, nothing.
All 3 safe mods work fine.
Ran chkdsk /r in recovery.
Ran proper fixboot procedure.
Went into safe mode and checked the event viewer.
The only concerning message i got was: The following boot-start or system-start driver(s) failed to load:
AmdK8
Fips
nod32drv
Formatting really isnt an issue since i can back up anything i need through safe mode. However its just the fact that the Windows gremlin has struck me again and i must defeat it once more.
I highly doubt this is a hardware issue as it is more of a driver/software issue.any help?
View 2 Replies
View Related
Jul 15, 2005
i just installed a WD Raptor drive and trying to install Windows XP Pro...the install went fine - and my BIOS configurations are set for RAID bootup. I have my other hard drives disconnected and it still wont boot. I have even gone as far as finishing with the Activation/Serial # and user name but when i restarted it boots up and runs through POST fine but the Windows Splash screen --indicating that windows is loading-- doesn't pop up. i know this sounds like i've just done something dumb but i have built several computers and this one is just kickin my.
View 1 Replies
View Related
Oct 21, 2009
i'm having to boot into windows xp. on power up sytem goes through the windows xp splash screen (with progress bar) and then instead of login prompt it goes just into the blue screen with moveable mouse pointer arrow.
issue seems to be similar to:
http://forums.techguy.org/windows-nt...o-startup.html
http://forums.techguy.org/windows-nt...p-problem.html
but recommended solutions didn't help so far.
symptoms just before issue - was not able to run use some system features - utility to turn off the display, utility to bring up battery info - everything was working fine before this
what i've tried:
boot to Last Known Good Configuration - resulting in the same blue screen
boot to Safe Mode / Safe Mode with networking / Safe Mode with comman prompt - resulting in blank (black) screen with "Safe Mode" in the corners and moveable mouse test the hardware (hard drive / memory etc.) via build in PC Doctor - all seems to be working
i am able to use bootable XP CD from other machine to get into Recovery Console
i am able to boot to simple live XP using BartPE-XPE usb key and access the hard drive
View 2 Replies
View Related
Sep 8, 2005
When Windows is starting up I get a mostly blank dialog box with an OK button at the bottom after the Windows splash screen disappears, on top of the Windows is starting up screen. The dialog box that contains a small piece of unrecognizable text in the top left corner that changes each time I start computer. Most of the icons on the desktop have changed to the generic I don't know what you are icon and no applications will run including Internet Explorer except the virus program . I get an error message that Windows needs to know what application created that file. (This includes cmd.exe)
The dialog box cannot be closed with the ( X ) in the corner and will only continue to start windows after sitting for about 10 minutes or clicking the OK button. I don't believe it's a virus as the virus program does load and did do a complete scan without finding a virus.
View 11 Replies
View Related
Jul 10, 2010
I keep a clean computer. Every day virus updates and scans, defrags, etc. I probably go overboard to make sure this rig stays healthy.But it's my lifeline to the world.
I'm in a third world country with no computer help at all...Barely a connection at time.That being said.3 times now when I boot up the computer runs through it's cycles, goes to the Windows XP page, and then absolutely nothing. Just a blank screen.
The same happens even when trying to go to safe-mode or debug. I'm lucky it's even working now.I've saved all my information.
View 4 Replies
View Related
Sep 8, 2010
I accidentally disabled video adapter on the dispaly control and when i restart my desktop suddenly the screen went into a very low resolution so i opened the display icon again and disable the adapter hoping that it would go back to its regular screen display. i restarted my computer again but blank screen has appeared. i can not retrieve now the normal screen display. the screen remains blank whenever i reboot my computer.
View 1 Replies
View Related
Jan 31, 2006
I started up my system today and on the windows splash screen (the page on start up that shoes the WINXP logo and the blue scrolling bar below) The blue scrolling bar was stuck in one place and stayed there for a good 2 hours so I restarted and was greeted by the infamous ?Disk boot failure, Insert a system disk and press enter?. So I turned off my system and took the side of the case of and disconnected the SATA cable from the hard drive and then the power cable from the hard drive as well, connected them back up powered the system back up and I am now back on the windows splash screen. With the scrolling blue bar below the WINXP logo stopping and starting randomly now and again. I am going to leave it for 2 hours see if it recovers its self, anyone got any ideas if this does not work what to do? I have my windows XP disk and serial number so I guess its fresh install? Still what could have caused this as it?s happened twice now!!!! Could it be the SATA drivers I have all the driver installed by a shop do I need to install SATA driver for the HD or not could the drive be faulty?
View 14 Replies
View Related
Apr 4, 2007
I have no specific reason pertaining to the problem but... about 2 months ago I noticed that just after the splash screen disappears, my desktop comes up completely blank, for (and I've timed this again and again) 84 seconds. With no apparent reason. After which the start menu appears along with my shortcuts and my lappy is as fast as ever!! I can confirm the following (and regular) maintenance activities performed before the problem.
My hard drive and Regisrty were both completely defragged and happy, I performed regular SpyBot, Ad Aware, Mcafee scans for the obvious, I ran Tune Up Utilities to remove all of my invalid reg entries, CCleaner for general crap, My system was optimised with PC Booster, as far as I was aware my machine was running sweet as a nut... It wasn't as if any of the mentioned actions were run close to the issue arising. It just happened one day.........
View 9 Replies
View Related
Jul 3, 2008
Turn the computer on, it starts to boot, I see the compaq splash screen then the blue windows is starting. Then it just restarts the process over. I have tried to repair windows: The F8 to last known good config & F8 safe and it just restarts from both of those as well. Win XP SP3 Currently doing this: You can boot from the cd and press R to go to the recovery console. Your best bet is to try running Checkdisk. So once in the recovery console, type chkdsk /r and press enter. It could take from 20 minutes to a couple of hours, depending on the repairs it needs to make
View 14 Replies
View Related
Jun 20, 2008
When i turn on,first Windows screen appears,then a blue screen blinks,then hp screen,then a blank page with cursor on the top left,then a screen with the message"we apologise for the inconvinience but Windows did not start successfully.there was a hardware or software problem.I tried to run it in Safe mode, Windows normally,last known configuration but no luck......Then someone suggested to Get into the Recovery Console by making a Recovery CD with ISO image but the machine is not responding to any of it.Is it with CD/DVD ROM drive or any major hardware problem???...I ran a self hard drive test and it seemed fine
View 3 Replies
View Related
Oct 23, 2005
I was playing a game and I rebooted my computer. When i went to start it it went to the a blank blue screen before the account screen in the beginning of XP. I know i can restore to new but i will have lost so much information that it would take about 3 months to retain it all back. It says it can not find operating system. I need help in a serious way. all advice and solutions are requested.
View 2 Replies
View Related
Jul 4, 2005
Intermittently the screen reamins blank at start up. I then need to turn th
PC off an then on again. Sometimes the scrren come on sometimes it takes a
number of OFF/ON's. MAchine is also now starting to reboot by itself. Have
used Nortons to check for Virus's.
View 6 Replies
View Related
Mar 8, 2008
When i start the laptop both the lights and the fans come on but the screen is blank. Tried replacing ram and hard disk but that doesn't seem to work. Sometimes the loading screen does come on but always freezes at XP loading screen and goes blank. Most of the time the screen stays blank when start button is pushed. Tried going through other monitor but doesn't still work.
View 11 Replies
View Related
May 13, 2005
A family member ran Norton Anti-Virus and an XP error message came up saying that XP needed to be reinstalled. I don't have a backup disc or a Windows XP disc. I read in another post "The system should have at least come with the setup files located on a hidden partition on the hard drive." Does anyone know how to access this? I can still get into programs and whatnot through pressing ctrl+alt+delete, clicking Applications and New Task. Then I browse for whatever I want to open, i.e. AOL etc. But XP has otherwise completely disappeared off my desktop. All that is there is the background. No taskbar, Start menu, or anything. It won't right click either. I tried System Restore, no luck
View 1 Replies
View Related
Apr 19, 2007
My computer after, we believe, a power surge during the wee hours of the morning a week ago can no longer totally boot up. Once powered on, it will go to a black screen, detailing how windows did not start properly. And something about it being due to or causing a hardware or software change.
View 5 Replies
View Related
Oct 11, 2010
I installed Windows XP on my computer, but when I got to restart / cut it on its just a blank sceeen. I can't see nothing like (start menu, my computer,etc..) What have I done and how do I correct it ?
View 2 Replies
View Related
Feb 11, 2009
Was working fine this morning but this afternoon - Upon startup everything runs fine until after the windows splash screen everything goes black and the only thing visable is a cursor, but nothing to click, cannot ctrl=alt=del, cannot right click. Cannot enter safe mode at all, last good configuration doesn't work either. Computer is still running, fan whirring, lights flashing. Fan has been cleaned and power supply checked, no change. Cannot get into anything to run explorer or virus check. She is running Windows XP SP3. I'm unsure of when sp3 was installed. I understand this may be an issue, along with video and graphics drivers, display settings, corrupt registry, flat CMOS battery or loose internal connections.
View 3 Replies
View Related
Jan 7, 2008
Ive done a fair amount of searching online and tried a number of things myself, needless to say, they didnt work.Ok, so here's the issue; When I go to turn on my computer, I make it to the XP splash screen with the 3 blue bubbles moving left to right... But nothing from there.Additionally, between the BIOS screen and the XP splash screen, theres some weird black screen with what looks like a long barcode-esq bar, where a solid white line fills the gaps moving left to right...
View 3 Replies
View Related
Feb 22, 2007
How can i change or remove it?? can i do the same with the shutdown screen?? also does anybody know how to get rid of i.e.s icon?? i use avant browser.
View 2 Replies
View Related
Mar 16, 2006
I boot my xp machine but it hangs at the xp splash screen.It's not like it's frozen, the blue bar under the "windows" just scrolls and scrolls and scrolls, etc. The same happens when I try booting to VGA mode.I am able to boot to safe mode, just not completely. I get to a screen that says " Safe mode Microsoft (R) Windows XP (R) (Build 2600.xpsp_sp2_gdr.05001-119: Service Pack 2) Safe Mode.I can also see the mouse moving around, just nothing else. Nothing was added, removed or installed.
View 6 Replies
View Related
Apr 25, 2005
This problem started several days ago. On restart the XP splash screen loads but freezes as the progress bar is in motion. After rebooting several times it does load to the desktop, but on restarting again it hangs.
I have searched reference articles, forums, etc and have found others have the same problem and have narrowed it down to nvidia drivers and hardware conflicts that load after 'mup.sys' in the boot up process.I had installed a nvidia graphics card and driver before this problem began but then uninstalled, deciding to keep the on board sis igp. I have downloaded driver cleaner and removed all traces of the nvidia driver but the problem persists..I am running XP sp2, p4 3ghz, foxconn motherboard, sis 661fx graphics.
View 2 Replies
View Related
Sep 14, 2009
My PC has developed a problem and I'm looking a solution. What I'm seeing is that when I boot my PC, it gets to the splash screen and I see the scroller moving but that's it. No color changes no BSOD, etc. At this point, I've been able to restore my system using an Acronis full system recovery but I would like to know what's going on behind the scenes when the progress bar moves but nothing.
View 3 Replies
View Related
Feb 14, 2008
I'm getting a BSOD. Everything seems fine--it is at least getting to the boot.ini since I get an OS selection--W2K or the Recovery Console. The W2K splash screen comes up, the blue hash marks scroll about half way across the bottom, halt, then BSOD "INACCESSIBLE_BOOT_DEVICE". I tried the Recovery console, but that BSODs as well. I used ERD to run CHKDSK --- no errors. Possibly the hdd? ERD took a loooong time to read what OSs were on the hdd--five minutes.
View 1 Replies
View Related
Jul 15, 2005
i used it all fine about 2 hrs ago and shutted down fine. i just now go 2 boot up and after i get the BEEp, bios screen, it says vereifying dmi pool data for a split ssecond and gives a blak screen for a split and does the Splash. but my issue is, it doesnt give me a splash...it just sits at that blak screen.
View 3 Replies
View Related
Jul 27, 2005
When im tryin 2 start her up, after the splash scr een l oads, just as it enters the next stage of boot up it flashes a blu screen and reboots. i cant boot under ANY start up options.
View 7 Replies
View Related
May 8, 2010
I am new here and I consider myself very knowledgeable on a computer but this one has me pulling my hair out. I have seen posts for similar situations but nothing identical to mine. What I have is a Dell E520 and we had a power serge and the computer shutoff. When the computer was turned back on it P.O.S.T. fine, loaded to splash screen and then once that is done loading I get a blank screen. Nothing. I reset go to safe mode, works fine, loads into safe mode. I try to load safe mode with networking, will not work. So I went back to safe mode and tried to do a system restore, told me it was disables and I would have to go back and enable it in regular mode.
View 3 Replies
View Related
Jul 23, 2005
I am running windows XP Home edition with SP2. When starting up it stalls at the XP splash screen with the flashing bar below it. I can start in safe mode but haven't had any luck with the system restore.
View 1 Replies
View Related
Oct 3, 2009
I have a Dell Dimension 4600. I got a new 80gb hard drive and wanted to clone it with the current 20gb drive. I took both drives and connected them to a different pc that had norton ghost on it. After cloning, which went fine, I placed them back into the Dell with the 80 gig set as master, and the 20gb set as slave. The computer would post normally and boot to a black screen with a blinking cursor, this happned right after verifying dmi data pool. It would hang at this screen never getting to the windows loading screen.
I returned the 20gb to the master drive and set the 80gb as the slave. It booted fine. After getting into windows I saw it was reporting the 80gb as C: and the 20gb as D:. I changed the drive letter of the 80gb (in safe mode) to G:. After changing it the computer would freeze at the XP splash screen, however I still had control of the mouse. I believe this was caused from windows search for the page file on C: which no longer existed............
View 1 Replies
View Related
