When I load windows, it gets up to the loading screen, stays on for a second, or less, and then just the screen blanks out and restarts again...This is after my first PC build. THe Harddrive is detected fine...(its also the one i used from the old computer I had...) What can i do for this?
View 9 RepliesI have never had this kind of problem before. The other day i was playin on online then i stopped and went to be, with the computer on. I also know i have some virus called trojan GE . and its in the systeme 32 file and is called ridirv , i think that is how it is spelled .. anyways. i woke up and moved the mouse and the computer was showing the screen to pick between safe mode or last known ... start windows you know. anyways i click last know configuration and it doesnt get past the windows loading screen and just restarts over and over. I tried to take out some memory and use one stick. I dont know what else to try.
View 8 Replies View RelatedI'm currently having problem with my other computer. Today when i start my computer, it goes through the normal things the hard drives and stuff except for one thing different, it shows me 5 options on how to boot: start normally, safe and etc. I choose normal thinking that theres no problem with my computer. Once it goes to the window loading screen, after 5 seconds it restarts. Then it goes through the same thing over and over. I don't know what to do to fix this problem.
View 1 Replies View RelatedComputer starts, Gets to Windows XP loading screen then restarts, and does this forever.I tried booting in every mode, Safe mode with networking with bios?Last known settings None boot Windows, all do the same thing.I reset bios battery, didn't help.I'm hoping I don't have to reformat as my 27 page coursework is on there and if i lose that im gonna cry.
View 14 Replies View RelatedNot positive this is the right place, if not tell me otherwise and I'll gladly move it. Heres the scoop though, I just finished building an i7 930 build asus II Rampage gene motherboard, one tera byte harddrive, 3 gb 1800 mhz ddr3 ram, and a gt220 1 gb video card. It will start up show the motherboard logo, then go to the xp loading screen and start doing the scrolling loader. about on the 6th scroll it will freeze, go black, then lit up black, then black and then restart all together. Nothing in the hardware seems to be out of place so im assuming its XP itself. i have checked the bios and the tempuratures seem normal. I just fully finished this build yesterday, I installed some drivers for the right parts, which made it restart and it ran fine. Then i installed a game and played it for a little while before shutting it down, when I came back a few hours later it started with this madness.
View 23 Replies View RelatedWhen I turned my computer on this morning it starts up but when it gets to the boot screen it gives me a blue screen but my computer instantaniously restarts so i have no idea what it said. What should I do I'm using ERD Commander 2005 and that let me boot into my computer but its limited I've never used ERD Commander before I've tryed a few things but nothing has worked yet
View 6 Replies View RelatedToshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
I have this strange problem:I can't see my Bios loading .The screen is totaly black untill the windows' welcome screen , and then everything is back to normal.
It happened when I updated my motherboard Bios (Gigabyte GA-8N-SLI ,Rev. 1.0) through the original vendor's Website
My dads pc was fine then all of the sudden it just restarted.And it came up to the options:restart in safe mode estart in safemode with networking estart in safe mode with networking Last known working config Normal But when he tries any of them.. None of them work The windows loading screen will come up flash a blue screen super fast (cannot read it no matter how hard i try) then go back to boot option screen.
View 3 Replies View RelatedI couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies View RelatedWhen I turn on my computer, everything seems to be going fine... the manufacturer's screen comes up, then the screen that shows Windows is loading, then it kindof gets stuck between the loading screen and the welcome screen. It just goes black. The hard drive will run continually as if it's searching for the rest of the information, but can't find it.
View 4 Replies View RelatedThe issue started when I went into msconfig and checked 'safe mode' in boot.ini. I restarted my computer and every time it would get to the Windows XP loading screen it would get The Blue Screen. I fixed this issue by putting in the Windows CD and clicked repair.
View 11 Replies View Relatedi just recently reinstalled windows xp on an old computer i had become corrupted and i had to reinstall it and now it boots up fine but during the loading screen it goes blue screen idk ive tried to reinstall the os again and still the same any advice it an hp pavilion 514c
View 1 Replies View RelatedMy PC has been unplugged for a few days and when I hooked everything up to startup the PC I get to the XP logo startup then the system restarts and goes to the safe mood/normal bootup screen. I have tried all of the different startup options, but each keeps looping a system restart. I cycled the power on my surge protector and am currently using a different pc on the same surge protector with the same power cable with no issues. Can anyone offer any advice as to why the PC is not starting?Also, I reinstalled a fresh copy of XP Pro on the PC about a month ago and everything was working fine before I unplugged it for a couple of days. The PC was not moved at all after I unplugged everything, it has just been sitting in the corner of my room.
View 5 Replies View RelatedFor the last couple days I have been having this issue. All of a sudden my computer goes blank, a blue screen appears for a split second and then it restarts. I can't even read the blue screen it goes by so quick. Is there anyway for me to find out what it is saying? Is there a log somewhere or something?
View 10 Replies View RelatedI recently started to get the blue screen of death on my computer. I am not sure how to fix it but its really annoying me. I just formatted my computer because it was doing this previous, and i thought formatting my computer would fix it.
View 13 Replies View RelatedAs the thread title probably shows, I've been having some difficulties with my system as of late. At first I thought it might have been some bad memory so I changed it out for 2 completely different sticks of RAM, but the symptoms persist.Shortly after loading Windows (XP latest patch) I will be going on about my business and the system sometimes freezes, at other times reboots, and often blue screens. I rarely get the chance to catch the blue screen error messages as the system tends to restart immediately afterward.
View 5 Replies View RelatedI'm having the same problem with my Acer Aspire 5100....computer all of a sudden goes to blue screen and restarts. It's never long enough to read the blue screen though.
View 2 Replies View RelatedI just bought a new hard drive for my computer because with the old one I was having problems with creating a new partition and installing XP... so I figured the Hard Drive itself was the problem. Anyways, I have the new drive hooked up, I run windows XP setup and it loads all of the files. It finishes and says "setup is starting windows" after this my screen goes black, the computer restarts and the cycle repeats.
View 12 Replies View RelatedI have a dell inspiron 6400 notebook and i have windows xp home edition installed. i am getting the blue screen error message sometime after my computer starts. and then automatically my computer restarts. however, my computer works normally in safe mode.what should i do to make my computer work correctly and i dont want to spend any money as i just bought it a few months ago.
View 1 Replies View RelatedMy computer started to do this wierd thing where it would load at the windows screen, then go to a blue screen, then restart.It tells me its shutting down to prevent memory loss, also tells me these numbers: 0x0000007E (0xC0000006, 0x806A276D, 0xF789E6E8, 0xF789E3E4)Before this started Windows prompted me to download a service pack, It worked fine ulti about two days later.So I start the computer in safe mode and do system restore, that doesent work. I started again and did a virus scan and it wouldent let me. So after trying and trying I finally gave up, I had nothing i wanted on that hard drive, so I decided just to reinstall windows. I pop the CD in there, and it asks me if I want to repair, I tried that. Now it wont even let me run safe mode.I do boot from cd, but when it loads the CD i cant see anything but a blue screen, like it froze or my screen doesent load it.
View 1 Replies View RelatedI have given my sister my old Averatec laptop that has Windows XP on it. While she is using it, eventually a blue screen appears, which is the precursor to it restarting suddenly. It happens so fast that we cannot read what the blue screen says. After it starts back up, we get a microsoft report saying a serious error has occured. This might not help, but I'll list it just in case. The error signature is:Is this a virus? If so, is there any hope without reformatting? I accidentally uninstalled the program that contained the OS files when I first got the computer.
View 14 Replies View RelatedI have a laptop with Windows XP Professional SP2. I get the following error messages in my system recently, and there will be a blue screen that pops up for 2 seconds, i am unable to read the message but the system restarts, this happens frequently now and some times i am able to use my system and found a pop up message saying "system has recovered from serious error" and get the error codes.recent activity that had done is i tried to uninstall .net framework v1.1 in my system as felt that i had .NETframework v2 installed in my system so it wudnt be of no use in my system.is it related with it or anything else as i wanna prevent my system crash, Please provide me a proper solution.
View 6 Replies View RelatedI have a HPDV8000 laptop and somehow managed to pick up this Antivirus XP 2008 Trojan Horse at some point. Pop ups about viruses etc were coming up so I used lavasoft's adaware and it seemed to remove it. After a cold boot, the desktop constantly restarts itself, followed by 0X0000008E Blue Screen. If I boot in safe mode with or without network connections, it does the same thing. If it sits at windows login. for any length of time the same blue screen stop codes come up.
View 10 Replies View RelatedI bought a new video card. i think it might be faulty but i want to be sure before I RMA it.i switched out all the RAM put new RAM in, switched around the old RAM in different slots, its not the RAM.i actually had to install XP on the brand new hard drive from another computer because when I tried on my old computer it would blue screen at the "windows is starting" part so now that it has a fresh windows with all the updates i put it back on the new computer and it blue screens at the loading part of booting windows the hard drive still works on my other computer but not my new one. the new one doesn't have on board video and I dont have another pcie video card to put in to check if its the video card i baught that is causing the problem. i dont know much about BIOS anything but i have a feeling it might have something to do with updating the BIOS?
View 4 Replies View Relatedone of my friend is having a problem with his Fujitsu Siemens Laptop (Win XP - Dot know the SP), whenever the laptop starts it shows the blue screen and restarts itself, so there is jo way you can login to the win xp, the following msg is displayed on the blue screen. the error is in Polish Language but i guess you can understand the error by the path it is giving
STOP: c0000218 {AWARIA PLIKU REJESTRU}
NIE JEST MODLIWE ZAEADOWNIE PREZ REJESTR GAE-ZI (PLIKU):
SystemRootSystem32ConfigSAM
two days ago i used my computer, i turned it off and took it back home from office. the next morning i tried to turn it on it flashed the blue screen and restarted. Now I am no computer expert so I don't know why this has happened all i can tell you is that it worked the night before i didn't download a thing and then it stopped.
can anyone could help me?My computer is an IBM laptop. It has windows XP installed and its very helpful but soo annoying. I have all my photos on it..anyone who answers and remember; i am not very computer smart so easy words!
At the beginning I thought I have it only whne I am using a special program. Now I saw I may have it even when I am not doing anything special - like reading a webpage. However, the main problem is when I am running Adobe Encore DVD - that program runs for a long while. Everytime it crashes (I mean win XP crashes with a blue screen). I have checked the event logger that what it says: 0x00000019 (0x00000020, 0x86764ec0, 0x86764f60, 0x0a140014) but most of the time I get the following: 0x1000008e (0xc0000005, 0x804c6c2f, 0xf3e1cb30, 0x00000000).
I have searched web and found that I should try to do the following: to change DisablePagingExecutive value from 0 to 1. I have done it, and tried to run Encore. At the same point I got the following reason for OS failure: 0x1000000a (0x000005c4, 0x000000ff, 0x00000001, 0x804db8ca). I really don't know what to do. I have to finish the DVD REALLY SOON and I can't create the image. Please please please help me (to reinstall windows is not an option - I can't ensure that the DVD project will not be deleted and I can't backup 55GB).
Alrite, my friend re-formatted his computer, and afterwards, he is having problems. It seems to start up fine, and it gets to both screens where it says, "Windows 2000 is starting up," and on the second one, it seems to get done then it goes to a blue screen for a very split second, and restarts automatically, and does this, Over and over. It doesn't make it to the desktop. He hooks up a different hard drive to it and it works fine.. It is also windows 2000. Its windows 2000 Service Pack 3.
View 10 Replies View RelatedWhen i was checking the computer out at sellers house, it did not crash and worked fine, I took it home for a good price (i thought) at $300. There was an instance of Windows XP installed, and seller asked me to format it before I started using the computer, I agreed and headed home. To test it out I installed Prince of Persia and ran that, everything went smoothly and I was satisfied. I then went out and bought a nice $200 widescreen monitor (the 15" crt wasnt cutting it) and the wireless card as it only had ethernet. Hooked up the new monitor and wireless connected to the internet and started installing WoW. At disk 5 it frooze up and its all gone downhill from there
View 3 Replies View RelatedComputer reboots always at the same point in a game (start of Creature phase in Spore) when its starting/trying to process an introdutory movie/animation.It happened one time, I tried again, it rebooted my computer again, so I tried to by pass the problem by starting a new game, using someone elses save game and it happened again.So I searched for information and discovered how to turn off Restart so I could get a Blue Screen with a BCCode.I got the Blue Screen and learned how to view the error log on windowns going to Control Panel> Administration Tools> Event Viewer> System.There I found the multiple occurences of the same error when the computer restarts.
View 12 Replies View Related