Blue Screen STOP: C0000218 Automatically Takes To The Startup Options To Reboot In Safe Mode?
Mar 18, 2006
When I start PC, it automatically takes me to the startup options part to reboot in safe mode, safe mode w/ networking, safemode w/ prompt, last known good config, & normal startup. Getting Stop c0000218 {Registry File Failure} The registry cannot load the hive (file) SystemRootSystem32Config
My computer keeps giving me this error when I start it up Stop: c0000218 Unknown Hard Error Unknown Hard Error I can boot it into safe mode, but I'm unable to really do anything with it. When I try to go on the internet I get directed to a Yahoo search of whatever I entered into the address bar... and any links clicked bring me to random pages. I also noticed that the address of the link in the search isn't showing up in the status bar.
one of my friend is having a problem with his Fujitsu Siemens Laptop (Win XP - Dot know the SP), whenever the laptop starts it shows the blue screen and restarts itself, so there is jo way you can login to the win xp, the following msg is displayed on the blue screen. the error is in Polish Language but i guess you can understand the error by the path it is giving
STOP: c0000218 {AWARIA PLIKU REJESTRU} NIE JEST MODLIWE ZAEADOWNIE PREZ REJESTR GAE-ZI (PLIKU): SystemRootSystem32ConfigSAM
I'm gettting a blue screen when i try to start my laptop with Windows XP media. It's saying the registry cannot load the hive (file): /SystemRootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable. I'm guessing I need the windows xp media reinstallation disk, but I can't seem to find it.
I just want to know how to change screen resolution in safe mode. The reason is when I try to use certain programs in safe mode, I can't view all the options and buttons of the program because it goes off the screen and resizing dosent help.I go to desktop properties and try to change it but the bar will not slide to any other position.
In trying to get rid of some adware, I attempted to boot my computer (P4 2.8 GHz, 1.5 GB Ram, Windows XP SP2) in safe mode. When I selected "Safe Mode with Networking", I was brought to a blue screen called a "STOP ERROR SCREEN" - basically it said that it had to stop the booting up of the computer or the computer might be harmed. It suggested removing any recently installed hardware and disabling BIOS memory options such as caching or shadowing. So I rebooted and got into windows normally just fine.
Then I decided to try just regular Safe Mode (without networking) - when I selected that option, the computer started to do it, then rebooted and prompted me if I wanted to boot into Windows normally or safe mode, etc...I tried Safe Mode again - same thing, a reboot. I tried Safe Mode with Networking again - and I got the blue Stop Error Screen again.
This is pretty strange (at least I've never seen it) and I'd really like to be able to boot into safe mode.
The problem is on my buddies pc. It uses Windows XP Professional. I have it setup next to this pc I'm currently using. First I get this screen:
We apologize for the inconvenience, but Windows did not start successfully. A recent harware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode Safe Mode with Networking Safe Mode with Command Prompt Last Known Good Configuration (your most recent settings that worked) Start Windows Normally Use the up and down arrow keys to move the highlight your choice. Any choice I highlight brings this screen: A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is indentified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with the hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
An app was installed, and right after, a BSOD came up with the following error message: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Technical information: *** STOP: 0x0000008E (0xC0000005, 0xBF803EF6, 0xF70917c4, 0x00000000) *** win32ksys - Address BF 803EF6 base at BF800000, DateStamp 43446a58 Beginning dump of physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance......
My main pc is stuck in a boot cycle giving me the black screen with options to start in safe mode etc etc and when selecting one of those options it reboots to the same point. When I press return the system tries to start it attempts it, clicks then goes back to boot cycle. The Windows XP system disk won't cut in like it should so I cannot gain control of the pc.
System is a Dell, 2years old and has had various viruses despite having the usual protection. I am currently using my old trusty Advent Pentium 3 for this message (which has never had the same degree of virus prob's curiously). After the first virus Dell talked me through using Ghost - brilliant. Within a couple of days it was hit again and usinng Spybot got rid of the virus but PC kept displaying the message rundll.dll file damaged. So I used XP Recovery seemingly with no problem only to find it won't reboot.
I cannot bootup the computer. It gives me the following error STOP:- c0000218 Registry file failure. The registry cannot load the hive (file) or systemrootsystem32configsecurity or the log or alternate. It is corrupt, absent, or not writeable. Cannot boot to safemode, also tried last known good configuration without success. I have also tried the microsoft KB 307545 fix but could not copy or delete the security file.
My mom was on my computer this afternoon and there was a power surge. When the power came back on, the computer would not come back on. When I booted my computer up this evening, everything was fine until midway into the startup sequence and I closed Yahoo! Messenger. Right after I did that I got the BSOD (BAD_POOL_HEADER) and the Stop errors at 0x00000019, (0x00000020, 0xE2B9E8F0, 0xE2B9E918, 0x0C050801). After restart, I tried to load HJT and I got an Explorer.EXE Application Error: The instruction at 0x7c91142e referenced memory at 0x00650072. The memory could not be read.
I'm getting a BSOD with the following Stop Error DRIVER_IRQL_NOT_LESS_OF_EQUAL *** STOP:0x000000D1(0x00000018,0x00000002,0x00000000, 0xF72BD25F) iastor.sys - Adress F72BD25F base at F72AE000 DateStamp 42b2df42 This happens every time I start up and also I am unable to boot into Safe Mode as it is getting hung on whatever file is after Mup.sys.My plan was to go into safe mode and update iastor.sys to a newer version but I cant. I also find it stange that this file is an issue as I only have a single hard drive and I was under the impression that this file had something to do with RAID.
2 months ago I ordered system from Cyberpower PC and it was shipped a week later.Set it all up,formatted Windows XP Home Edition and got it running. Shortly there after, I started blue screening and it seemed RAM related, so I swapped the sticks and it seemed I would only BSOD with one of the sticks, so I called the company, shipped it back, and got a new stick.
Then I started to BSOD again with the error message of IRQL_LESS_OR_NOT_EQUAL and then 0x0000000A (0x0000F78A, 0x0000002, 0x0000001, 0x806E4A8F), and this particular error would only occur while I was playing World of Warcraft. So first I pulled the new stick of RAM and tried playing... and everything went fine for a day, and then I BSOD'd again, same error
Updated my computer using automatic updates. I unfortunately didn't pay attention to the updates that were being installed. After a restart, I got the following error:
A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen sppears again, follow these steps: Check to be sure you have adequate disk space. If a drive is identified in the stop message, disable the driver of check the manufacturer for driver updates. Check with our hardware vendor for any BIOS updates. Disable any memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advanced startup options, and then slect safe mode.
I tried booting into "Safe Mode" to defrag my computer. Before it goes into "Safe Mode" I get a blue screen stating that "I must remove improperly installed software to proceed". I have not installed any software. I have replaced my cd-rom burner and it is working properly. Any ideas on how a I may access "Safe Mode"?? I am running 2000 pro. Also is there a way I can see what the "Administrative Password" on Win 2000 pro.? I set up a friends computer with 2000 and I didn't enter a password. Apparently, someone else has entered one but can not remember it, thus their computer is useless without the password.
My computer is running horribly slow and so I've tried to enter safe mode but I get a blue screen with instructions.It says to check to be sure you have adequate disk space. Says to disable the driver (causing problems) or check with manufacturer for driver updates or try changing video adapters.I cannot get into safe mode at all to run spybot (freezes when in regular mode).I had to type this from another computer.The technical information is:*** STOP: 0x0000007E (0xc0000005, 0x80537009, 0xF7A2B1B4, 0xF7A2AEB0)Thank you
had blue screen so re-started in safe mode and searched for suggested problem....MpFirewall.sys.......found 2 files.........removed them to recycle bin because didn't know what to do with them. Can i safely delete now and what else should I do?
I'm using Windows XP Professional. I am not able to log back into my Administrator account. I'm stuck in a limited user account and though my Administrator account is set w/o a password, I still can't login, even through my computer's Safe Mode which is was the Dell service person suggested
I was trying to eliminate the login screen from my computer's startup. Initially, I used a tip from Annoyances.org by entering "control userpasswords2" in the Run menu and turning off the "Users must enter a user name and password to use this computer" option
About my BSOD problem w/ my Windows 2000 Professional 2Pk operating system. Computer will not startup properly then goes to blue screen
I've been looking for help online and speaking to people but everyone is down on me for still using Windows 2000 Professional. Am willing to upgrade to XP if I can figure out the current problem
My granddaughter downloaded some kind of game on my computer yesterday she said that while she was playing a box came up and the screen went blue well it has been blue ever since the error Disable or uninstall any anitvirus disk defragmentation or back utilities Check your hard drive configuation and check for updated drivers Run chksk/f to check for hard drive corruption and then restart your computer techincal info stop:oxooooo24(oxoo190203,0x81364008 ,oxcooo102 ,oxooooooo)
I used to be able to access it perfectly fine but i went to safe mode and got the blue screen with the 0x0000007B error. My windows works fine but the safe mode.I know it was caused by a virus, i just don't know how to fix it.I scanned with everything but still could not find it
I am having trouble booting up my laptop. It goes to the "windows" screen the a blue screen flashes for just a second and the only thing I can read is "a problem has occured" because of the short duration the screen is up...there is a lot more words on there but I don't have time to read it all. Then it goes to the option screen to restart or start in safe mode...which is what I'm in at this time.
I get a blue screen then it restarts in a loop, so I have tried to start in safe mode however this reads the hard drive then goes into a similar loop of getting a blue screen and restarting. I have the windows XP disk and code, but wondered whether by reinstalling windows all data would be lost? I would, if at all possible prefer to get the data from the hard-drive, is there any way to do this. Also, I am not entirely sure on how to re-install it anyway.
I now get a BSOD saying: BAD_POOL_CALLER and the tech info says:*** STOP: 0X000000C2 (0x00000007, 0x00000CD4, 0xc033F175, 0xF77C0AFC)This is even when I try to boot in fail safe mode.Is there a way to get past this?
When trying to start XP Media Center 2005 in safe mode, it completes loading Mups.sys, the screen goes blank and flickers slightly like it's changing video modes, and i get a "BSOD"/blue screen (photo attached)The computer boots normally in XP when booted normally, and in Kubuntu 7.04/Feisty and Kubuntu 7.10/ Gutsy when booted normally and in recovery mode.I suspect the problem may have to do with the failed install of the Netscape Activex Wrapper Plugin from buzzen.com which (supposedly) lets Gecko-based browsers run Activex scripts intended for IE7, but I'm not sure as I haven't used safe mode in some time
I have a IMB Thinkpad Laptop running Windows XP that keeps giving me the same blue screen STOP message error. THis happens at random times and at random intervals. The only software installed recently was a gmail notifier and I have already uninstalled that and the blue screen continues to appear. The message is: IQRL_NOT_LESS_OR_EQUAL and recommends I disable BIOS caching and shadowing. The stop message is: ***STOP:0x0000000A (0xFF1711F2, 0x00000002, 0x00000000, 0x804D9B64)
I had been away from my computer for about an hour and when i returned the screen was black and nothing would change it so hit the restart button. When the computer started up, I first saw the usual blue dell logo-screen, however, the next screen was the windows 98 startup logo-screen. The computer then entered DOS mode and at the top of the screen it says Microsoft Windows 98. This problem persists every time i start the computer. I only have 1 primary partion and i installed XP on it from a clean install by using a win98 bootdisk to format and running winnt from the i386 folder of the xp cd. When i try to enter SAFE MODE the computer goes to the Win 98 start-up logo screen again and enters DOS again. I know that all my files are still on the HDD because i can navigate through them. All i really want to do is somehow save some files that are on te HDD so i can just format and reinstall XP.
i have windows home xp edtion on parkard bell.in safe mode it is fine,but when on normal bootup mode it will hang up after 2mins aprox(then restart saying crit error,check hardware etc and being to dump files kernel),on a blue screen.