i have windows home xp edtion on parkard bell.in safe mode it is fine,but when on normal bootup mode it will hang up after 2mins aprox(then restart saying crit error,check hardware etc and being to dump files kernel),on a blue screen.
View 2 Replieswe cant change the display depth below 16bit. we can only see windows in safe mode it just shows a garbled screen in normal mode
View 2 Replies View RelatedWhen my computer boots up, about 5 seconds after the desktop loads, my screen turns blue with the Physical Memory Dump Error
Stop: 0x0000008E (0xC0000005, 0xEDACCB75, 0xeB6E67F0, 0x0000000)
It boots up in safe mode fine, I have tried system restore and ran multiple virus/malware scans.
Can someone tell me what loads/runs when choosing normal mode that does not run choosing safe mode.
View 1 Replies View RelatedWell, Ive tried reinstalling XP 3 times. This third time, after a clean installation, I realized that Safe Mode works fine after 500 errors are thrown at me. That is what I am in right now: Windows XP Safe Mode with Networking. First off, after I see the Windows XP Professional loading screen, my screen freezes into a God awful mess. So when I restart, I go into Safe Mode, it gives me a bazillion(which is a real word in FireFox 2.0's dictionary) errors that look like so
View 2 Replies View RelatedWhen trying to start XP Media Center 2005 in safe mode, it completes loading Mups.sys, the screen goes blank and flickers slightly like it's changing video modes, and i get a "BSOD"/blue screen (photo attached)The computer boots normally in XP when booted normally, and in Kubuntu 7.04/Feisty and Kubuntu 7.10/ Gutsy when booted normally and in recovery mode.I suspect the problem may have to do with the failed install of the Netscape Activex Wrapper Plugin from buzzen.com which (supposedly) lets Gecko-based browsers run Activex scripts intended for IE7, but I'm not sure as I haven't used safe mode in some time
View 10 Replies View RelatedWent into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 Replies View RelatedRan smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
View 14 Replies View RelatedI tried System Restore a week ago, but it didn't work. It ran but at the end I got the error message that it didn't complete and couldn't restore to the earlier point. It displayed the red "X." I deleted all of the restore points and set the amount of store to the maximum and set a new restore point. Still it didn't complete. I also ran Malwarebytes - it couldn't find any issues.I tried it in Safe Mode and it worked - it set the new point and renamed three files - two of them were Norton files, the third I didn't recognize. I set a new point and again it DID NOT COMPLETE - I got the same error message!
View 3 Replies View RelatedI am working on a Dell GX280 which had issues with its heatsink. Also, at the same time the machine continues to not boot up. It freezes at the Windows XP logo screen. It will not go any further. We think that when the fan started racing the user got worried, pulled the power cord and maybe did damage.However Im still working on fixing it. I can boot up into safe mode, I have disabled all non microsoft items in services and all items in start up and I continue to have the same problem, freezing at start up.
View 3 Replies View RelatedAfter starting my pc i noticed what 99% of data in my hard disk has vanished. it used to be only a 1GB free space there and now it shows 38,8 out of 39 GB. I tried system restore in normal and safe mode. .Thorough description of situation:
PC runs on Windows Xp SP2. It has 2 hard drives where the biggest one is paritioned into three drives: one for Windows installation, second was used for installation files of other programs (I kept Program Files folder there) and the alst one was dedicated for data storage. So the problem occured with the second drive. and as a result i do not have most of my programs running.
Recently I was playing a game when my computer froze up, when I restarted it, it froze every time on the Windows XP bootscreen. It boots fine in Safe mode with networking. (I'm typing this post on this computer)
View 2 Replies View Relatedcomputer was in blue screen. Unplugged and rebooted. Hung at Starting Windows. Unplugged again and rebooted. Selected user and continued on. Hung after desktop image was downloaded and normal desktop was presented. If I moved the cursor to the task bar, got hour glass. Could not get task manager to appear and could not start any program.Booted in safe mode with networking.
View 5 Replies View Relatedbut i think i posted this in the other area before. i had some bugs i couldn't delete in normal mode, so im like oh kay, easy, go in safe and delete the suckers. i restart my computer and f8, and try to go into safe mode, said something about your computer was shut down incorrectly or power lost and some files are missing now.
so im like, ummmmmmmmmmm... how do i get round this. so, i restarted my computer and put it in to the (Last Known Good Configuration), i know, i went to Run>msconfig>Boot.ini>tick /SAFEBOOT and restart my computer, not knowing this was one of the biggest mistakes i've ever done. it starts and it runs a little big and boooom!!! blue screen pops up and this is what it says, "a problem has been detected and windows has been shut down to prevent damange to your computer....
I Installed A New Programme Which Was Downloaded From Bit Torrent
Blue Screen - Memory Dump
Rebooted And Now It Just Hangs On Windows Xp Logo Screen.
Tried To Boot Using Safe Mode But No Joy.
Also Tried To Use The Restore Disks And The Xp Disk Itself But It Would Not Boot From Those.
What Do I Do Now? I Dont Want To Format The Drive And Loose All My Files.
Updated my computer using automatic updates. I unfortunately didn't pay attention to the updates that were being installed. After a restart, I got the following error:
A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen sppears again, follow these steps: Check to be sure you have adequate disk space. If a drive is identified in the stop message, disable the driver of check the manufacturer for driver updates. Check with our hardware vendor for any BIOS updates. Disable any memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advanced startup options, and then slect safe mode.
I tried booting into "Safe Mode" to defrag my computer. Before it goes into "Safe Mode" I get a blue screen stating that "I must remove improperly installed software to proceed". I have not installed any software. I have replaced my cd-rom burner and it is working properly. Any ideas on how a I may access "Safe Mode"??
I am running 2000 pro. Also is there a way I can see what the "Administrative Password" on Win 2000 pro.?
I set up a friends computer with 2000 and I didn't enter a password. Apparently, someone else has entered one but can not remember it, thus their computer is useless without the password.
My computer is running horribly slow and so I've tried to enter safe mode but I get a blue screen with instructions.It says to check to be sure you have adequate disk space. Says to disable the driver (causing problems) or check with manufacturer for driver updates or try changing video adapters.I cannot get into safe mode at all to run spybot (freezes when in regular mode).I had to type this from another computer.The technical information is:*** STOP: 0x0000007E (0xc0000005, 0x80537009, 0xF7A2B1B4, 0xF7A2AEB0)Thank you
View 3 Replies View Relatedhad blue screen so re-started in safe mode and searched for suggested problem....MpFirewall.sys.......found 2 files.........removed them to recycle bin because didn't know what to do with them. Can i safely delete now and what else should I do?
View 14 Replies View RelatedAn infinite loop it seems. i was trying to start my pc in safe mode, to delete a .exe file from C:WindowsSystem32 which was suggested by a post to fix the "windows not genuine problem". To be able to do that, i ran msconfig and selected /safeboot under BOOT.INI tab. now everytime i try to reboot my pc it asks me to select an operating system (windows xp pro/microsft windows) if i select windows xp then it asks me to select a startup mode (safe/normal/last successful) and then no matter what i select it will reboot it self, and do the same again. If i select microsoft windows (instead of xp) then it shows MS Windows 98 screen and then goes into DOS prompt. from what i have read in some of the threads is that, i have a virus which is preventing my pc to boot in to safe mode, and because i have selected /safeboot from msconfig windows will only boot in safe mode, meaning i am stuck. the workaround these threads were suggesting was to find the boot.ini file and rename it to something else, which would fix the problem, because this file holds the info about in which mode your pc should boot. i tried to rename this file from command prompt (i cant get into windows, thats why), using "ren c:oot.ini boot.ini" but it says file name invalid. i think this is because its a hidden file. then i tried "attrib -h boot.ini", but it says attrib cannot be used in DOS mode.
View 10 Replies View RelatedI went into MSCONFIG and checked the box to go into safe mode so i could run some virus scans and adware scans and stuff like that. Now when it gets to the desktop it has the window that says Loading Windows and then after like 2-3 min. it says password is incorrect and that i should retype it and becarefull of caps lock and stuff like that. The thing is don't have a password. It does this when i boot normally too but it lets me hit ok and hit Cancel without a password entered.
All of a sudden it tries logging me in automatically when I start up but the thing is i dont need to log in. So I try to go back into normal mode and Ican't. I hit F8 during startup and went to the Boot Normally option but it still does to safe mode. What do I do? How do I log on or how do I get rid of this password thing? One more thing, the window that tells me the password is wrong has an OK box but theres no mouse on the screen for me to click it and I can't use the keyboard to select it.
I've got a problem booting Windows XP in safe mode though it works wll in normal mode. I press on f8 at the begining, I do get the menu where I chose the option "safe mode" and then it seems to boot up but after a few seconds all I get is a black screnn and a blinking cursor on the top left (this lasts for more then 15 mins when I get fed up and try again) What can I do?
View 1 Replies View RelatedI am working on a computer now that is failing to get online in normal mode. It can get online in safe mode.
View 8 Replies View RelatedI've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
View 2 Replies View RelatedHello everyone , i have read a lot of posts about slow pc in normal mode but i cant find any help. My PC Starts up very slow... WinRAR , Winamp .. starts also slow , for example i download a file which is rared. i press Open and then it stop responding for awhile
View 3 Replies View RelatedMy computer worked fine yesterday but started to keep restarting every time my computer was done loading the desktop. I went on Event Viewer and found errors like this:The following boot-start or system-start driver(s) failed to load
View 1 Replies View RelatedI used to be able to access it perfectly fine but i went to safe mode and got the blue screen with the 0x0000007B error. My windows works fine but the safe mode.I know it was caused by a virus, i just don't know how to fix it.I scanned with everything but still could not find it
View 12 Replies View RelatedI am having trouble booting up my laptop. It goes to the "windows" screen the a blue screen flashes for just a second and the only thing I can read is "a problem has occured" because of the short duration the screen is up...there is a lot more words on there but I don't have time to read it all. Then it goes to the option screen to restart or start in safe mode...which is what I'm in at this time.
View 14 Replies View RelatedI get a blue screen then it restarts in a loop, so I have tried to start in safe mode however this reads the hard drive then goes into a similar loop of getting a blue screen and restarting. I have the windows XP disk and code, but wondered whether by reinstalling windows all data would be lost? I would, if at all possible prefer to get the data from the hard-drive, is there any way to do this. Also, I am not entirely sure on how to re-install it anyway.
View 3 Replies View RelatedI now get a BSOD saying: BAD_POOL_CALLER and the tech info says:*** STOP: 0X000000C2 (0x00000007, 0x00000CD4, 0xc033F175, 0xF77C0AFC)This is even when I try to boot in fail safe mode.Is there a way to get past this?
View 5 Replies View RelatedI have windows xp and all previous service packs have been installed thru automatic update. However when trying to install SP 3 using windows update it fails to install. I have then gone to the Microsoft website and downloaded SP3 and tried to load it from my desktop. It will go thru the installation and when it gets to the finish stage it seems to stall. I have left it run for over 1 hour with out it finishing, I have both tried to shut down andnormally and also hold the on button to turn the computer off. Windows will then only start in the safe mode. In the safe mode I can go back to a previous date and restore settings and re-start in the normal mode.
View 10 Replies View Related