Went into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 RepliesAn infinite loop it seems. i was trying to start my pc in safe mode, to delete a .exe file from C:WindowsSystem32 which was suggested by a post to fix the "windows not genuine problem". To be able to do that, i ran msconfig and selected /safeboot under BOOT.INI tab. now everytime i try to reboot my pc it asks me to select an operating system (windows xp pro/microsft windows) if i select windows xp then it asks me to select a startup mode (safe/normal/last successful) and then no matter what i select it will reboot it self, and do the same again. If i select microsoft windows (instead of xp) then it shows MS Windows 98 screen and then goes into DOS prompt. from what i have read in some of the threads is that, i have a virus which is preventing my pc to boot in to safe mode, and because i have selected /safeboot from msconfig windows will only boot in safe mode, meaning i am stuck. the workaround these threads were suggesting was to find the boot.ini file and rename it to something else, which would fix the problem, because this file holds the info about in which mode your pc should boot. i tried to rename this file from command prompt (i cant get into windows, thats why), using "ren c:oot.ini boot.ini" but it says file name invalid. i think this is because its a hidden file. then i tried "attrib -h boot.ini", but it says attrib cannot be used in DOS mode.
View 10 Replies View RelatedI have an older somputer I use to Host Games online...seemed fine last few nite .however the last 2 oe 3 times I have started it...it takes forever to start and a screen appears saying sorry for any inconveinince but windows could not start..etc etc..gives options to start in Normal mode safe mode or last known good configuration..wich is what I tried after turning it off and back on again..still nothing..I can get it to start in safe mode....but it wont boot up in normal mode..just hangs at "Windows XP" screen...Its an older Pentium4 Dell Dimension4300.
View 6 Replies View RelatedI am working on a Dell GX280 which had issues with its heatsink. Also, at the same time the machine continues to not boot up. It freezes at the Windows XP logo screen. It will not go any further. We think that when the fan started racing the user got worried, pulled the power cord and maybe did damage.However Im still working on fixing it. I can boot up into safe mode, I have disabled all non microsoft items in services and all items in start up and I continue to have the same problem, freezing at start up.
View 3 Replies View RelatedRan smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
View 14 Replies View Relatedcomputer was in blue screen. Unplugged and rebooted. Hung at Starting Windows. Unplugged again and rebooted. Selected user and continued on. Hung after desktop image was downloaded and normal desktop was presented. If I moved the cursor to the task bar, got hour glass. Could not get task manager to appear and could not start any program.Booted in safe mode with networking.
View 5 Replies View Relatedwe cant change the display depth below 16bit. we can only see windows in safe mode it just shows a garbled screen in normal mode
View 2 Replies View Relatedbut i think i posted this in the other area before. i had some bugs i couldn't delete in normal mode, so im like oh kay, easy, go in safe and delete the suckers. i restart my computer and f8, and try to go into safe mode, said something about your computer was shut down incorrectly or power lost and some files are missing now.
so im like, ummmmmmmmmmm... how do i get round this. so, i restarted my computer and put it in to the (Last Known Good Configuration), i know, i went to Run>msconfig>Boot.ini>tick /SAFEBOOT and restart my computer, not knowing this was one of the biggest mistakes i've ever done. it starts and it runs a little big and boooom!!! blue screen pops up and this is what it says, "a problem has been detected and windows has been shut down to prevent damange to your computer....
I went into MSCONFIG and checked the box to go into safe mode so i could run some virus scans and adware scans and stuff like that. Now when it gets to the desktop it has the window that says Loading Windows and then after like 2-3 min. it says password is incorrect and that i should retype it and becarefull of caps lock and stuff like that. The thing is don't have a password. It does this when i boot normally too but it lets me hit ok and hit Cancel without a password entered.
All of a sudden it tries logging me in automatically when I start up but the thing is i dont need to log in. So I try to go back into normal mode and Ican't. I hit F8 during startup and went to the Boot Normally option but it still does to safe mode. What do I do? How do I log on or how do I get rid of this password thing? One more thing, the window that tells me the password is wrong has an OK box but theres no mouse on the screen for me to click it and I can't use the keyboard to select it.
I've got a problem booting Windows XP in safe mode though it works wll in normal mode. I press on f8 at the begining, I do get the menu where I chose the option "safe mode" and then it seems to boot up but after a few seconds all I get is a black screnn and a blinking cursor on the top left (this lasts for more then 15 mins when I get fed up and try again) What can I do?
View 1 Replies View RelatedI am working on a computer now that is failing to get online in normal mode. It can get online in safe mode.
View 8 Replies View RelatedI've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
View 2 Replies View RelatedHello everyone , i have read a lot of posts about slow pc in normal mode but i cant find any help. My PC Starts up very slow... WinRAR , Winamp .. starts also slow , for example i download a file which is rared. i press Open and then it stop responding for awhile
View 3 Replies View RelatedI have an HP Pavillion 553W and for whatever reason tried to install Service Pack 2 on our computer yesterday and when we tried to get on the computer this morning it will not open in normal or safe mode. IT tried to start up goes to the HP screen then to the XP screen and starts over again.
View 5 Replies View RelatedI have a dual boot linux/xp system.I was looking at partitions - just listing them - in linux, and now win xp won't come up in normal mode. It will come up in safe mode, however. Can you help me get my "normal mode" back?When the horizontal moving bar comes up in normal mode, it just goes on forever. I see the disk light go on for about 8 cycles of the bar. It usually runs 11 cycles before giving me the user selection screen. Now the disk light goes out after cycle 8, and the bar keeps going. I waited 32 cycles before giving up.
View 1 Replies View RelatedI can boot up in safe mode, but it's frozen up a couple times, over about 20 hours of usage, and I've had to restart.I've tried running adaware, windows defender, housecall, kaspersky online scanner. They came up with 4-5 items but it didn't fix the problem.
On System Configuration utility (start<run<"type" msconfig) on boot ini tab I selected Safe mode & Minimal (Alternateshell) & restarted. Then On the screen I see only a dos prompt window, CMD.exe. No graphical window. No start menu or other destop icons.Restart & try with F8 key, other F keys...... no use. Then I repaired with the win xp cd. The problem going more worst than before. The machine display a message "Windows xp setup cannot run under safemode . Setup will restart now". Either I close it or OK it, machine restarts. I can't even try anything now
View 4 Replies View RelatedI can not log to the admin account (no password set for the admin, hit enter).I tried that in normal mode and safe mode but no success.It is not a password problem.When I tried to log in it logged me out immediately.
View 1 Replies View RelatedInstalled drivers - now it wont shut down in normal mode, but will do in Safe Mode
View 2 Replies View RelatedI tried System Restore a week ago, but it didn't work. It ran but at the end I got the error message that it didn't complete and couldn't restore to the earlier point. It displayed the red "X." I deleted all of the restore points and set the amount of store to the maximum and set a new restore point. Still it didn't complete. I also ran Malwarebytes - it couldn't find any issues.I tried it in Safe Mode and it worked - it set the new point and renamed three files - two of them were Norton files, the third I didn't recognize. I set a new point and again it DID NOT COMPLETE - I got the same error message!
View 3 Replies View Relatedi have windows home xp edtion on parkard bell.in safe mode it is fine,but when on normal bootup mode it will hang up after 2mins aprox(then restart saying crit error,check hardware etc and being to dump files kernel),on a blue screen.
View 2 Replies View RelatedAfter starting my pc i noticed what 99% of data in my hard disk has vanished. it used to be only a 1GB free space there and now it shows 38,8 out of 39 GB. I tried system restore in normal and safe mode. .Thorough description of situation:
PC runs on Windows Xp SP2. It has 2 hard drives where the biggest one is paritioned into three drives: one for Windows installation, second was used for installation files of other programs (I kept Program Files folder there) and the alst one was dedicated for data storage. So the problem occured with the second drive. and as a result i do not have most of my programs running.
Came home to a black screen, so i turned it off via power button. tried to turn it back on, got as far as windows xp logo and then it restarted itself. That restart it took me into dos mode saying windows couldn't start because of named a few reasons like new hard/software. Gave the options to start in safe mode, safe mode with networking, safe mode custom (or something like that), starting windows in the last configuration that worked, or start windows normally.I tried them all, it won't start.It simply keeps rebooting and showing me the same message.
View 4 Replies View RelatedSomething triggered an auto shutdown of Windows the other day, so I booted into Safe Mode and fired up Malwarebytes. It found a Trojan Vundo so I got rid of it. I may have run VundoFix or ComboFix as well. I boot back into Normal Mode but Windows prompts me to sign in a Safe Mode with a normal resolution (1024x768). The USB ports work but the "theme" taskbar and start button are in Safe Mode style, the sound card doesn't function and certain programs such as iTunes do not run. I can boot into Safe Mode and it is basically the same but with a lower screen resolution.
View 2 Replies View RelatedI have been in safe mode for a couple of days. Nothing I do will return me to normal mode. Tried "run msconfig.exe and checked normal mode but that does not work. On opening windows tried f8 and it shows normal mode in highlights but still no luck.
View 4 Replies View RelatedCan someone tell me what loads/runs when choosing normal mode that does not run choosing safe mode.
View 1 Replies View Relatedthis is the best way I know to explain all of this. I am running a 3 yr old Gateway with Windows xp and Sp 1 & 2. I have always stayed up to date with my Windows updates deleting cookies, defrags and so on. I am running Avast anti virus and Armor 2 Net firewall. I have noticed over a period of about a mth that my system has been getting pretty slow to boot up and load up web pages. Now I am having to manually start my PC and I have to do it in safe mode F8 and click on debugging mode. If I don't do it this way then everything loads up and then my PC just turns itself off. I have PC doctor and I have done a complete diagnostic test and I have gone to antivirus.com and did a virus scan there as well as with my Avast. I am thinking that I may have to totally take everything out and reinstall everything back in. The only thing is -is that I don't know what to type in to get the whole thing going. Also I have been getting a message but only sometimes that says RTL cannot locate HPOIPMO7.exe (HPOIMO7.exe) I haven't a clue what this is. Might it have anything to do with what is going on. I don't mean to write a book here but there is one other thing, the other day I had a window pop up that said that windows needed me to reinstall my xp software and when I tried it said that the version that I was already running was newer than the cd software I was trying to install and wouldn't accept it.
View 7 Replies View RelatedIt all started when my mouse stopped responding and during subsequent reboots, I would just get the windows loading screen forever and never get past it.I have xp home edition and its a custom built system. Let me know if you need any other specs.i tried using a different mouse initially but didnt help.I've reseated the hardware, checked all connections.I cannot even load into safe mode.I get the option, choose it, and it begins loading all those necessary drivers and then just stops at some driver (I cannot remember which one.I am at the library writing this).It always does this.I tried using last good config,nothing.When starting Windows normally, it just hangs at the loading screen with the little moving bar.I re-installed windows (I have two drives; I reinstalled over Windows on the drive that had windows); ive tried repairing Windows; I then formatted the drive with Windows and tried a clean install and it hangs at the same point.
View 6 Replies View RelatedComputer restarts before login screen unless I interupt boot to choose debugging mode (or set it using msconfig). I've disabled everything in msconfig with no change. I've removed all hardward except the minimum. No change. The error I get if I prevent auto restart during boot is a "Multiple_IRP_Complete_Requests) error. This problem started without anything being installed or removed. If I go in to the BIOS and disable ANY devices (i.e. sound), then the Debugging mode trick to get the computer started doesn't work which seems backwards.
View 5 Replies View RelatedMy XP Pro box will not boot in Normal mode. The XP screen appears with the little timing bar active, then the screen goes black, I hear a brief chatter of the disk, and then nothing. No bootup sound and no further noise from the disk.After a forced reboot, the various options appear and I can get to Safe Mode.CHKDSK finds no errors.A system restore results in the same hang.(and after returning to safe mode, it indicates that the restore was successful).The ONLY thing that I remember doing before this happened was to set my Power Settings to Desktop, which only has Turn off Monitor afer 10 minutes. I went out for a while and when I returned, the screen would not return. IE it stayed black.
View 9 Replies View RelatedA guy in the office was transferring images from his digital camera to his PC when the screen froze. He now can't start up his OS unless in safe mode. I've tried "last known good configuration", used an old restore point, checked for clashes in Device Manager, done a diagnostic startup using msconfig and still no joy. The machine is out of warranty and we can't find the recovery disks anywhere. Also, because the software was preinstalled there's no original disc to do an XP repair job on it. What more can I try?
View 3 Replies View Related