I used to be able to access it perfectly fine but i went to safe mode and got the blue screen with the 0x0000007B error. My windows works fine but the safe mode.I know it was caused by a virus, i just don't know how to fix it.I scanned with everything but still could not find it
View 12 RepliesUpdated my computer using automatic updates. I unfortunately didn't pay attention to the updates that were being installed. After a restart, I got the following error:
A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen sppears again, follow these steps: Check to be sure you have adequate disk space. If a drive is identified in the stop message, disable the driver of check the manufacturer for driver updates. Check with our hardware vendor for any BIOS updates. Disable any memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advanced startup options, and then slect safe mode.
I Installed A New Programme Which Was Downloaded From Bit Torrent
Blue Screen - Memory Dump
Rebooted And Now It Just Hangs On Windows Xp Logo Screen.
Tried To Boot Using Safe Mode But No Joy.
Also Tried To Use The Restore Disks And The Xp Disk Itself But It Would Not Boot From Those.
What Do I Do Now? I Dont Want To Format The Drive And Loose All My Files.
I tried booting into "Safe Mode" to defrag my computer. Before it goes into "Safe Mode" I get a blue screen stating that "I must remove improperly installed software to proceed". I have not installed any software. I have replaced my cd-rom burner and it is working properly. Any ideas on how a I may access "Safe Mode"??
I am running 2000 pro. Also is there a way I can see what the "Administrative Password" on Win 2000 pro.?
I set up a friends computer with 2000 and I didn't enter a password. Apparently, someone else has entered one but can not remember it, thus their computer is useless without the password.
My computer is running horribly slow and so I've tried to enter safe mode but I get a blue screen with instructions.It says to check to be sure you have adequate disk space. Says to disable the driver (causing problems) or check with manufacturer for driver updates or try changing video adapters.I cannot get into safe mode at all to run spybot (freezes when in regular mode).I had to type this from another computer.The technical information is:*** STOP: 0x0000007E (0xc0000005, 0x80537009, 0xF7A2B1B4, 0xF7A2AEB0)Thank you
View 3 Replies View Relatedhad blue screen so re-started in safe mode and searched for suggested problem....MpFirewall.sys.......found 2 files.........removed them to recycle bin because didn't know what to do with them. Can i safely delete now and what else should I do?
View 14 Replies View RelatedI am having trouble booting up my laptop. It goes to the "windows" screen the a blue screen flashes for just a second and the only thing I can read is "a problem has occured" because of the short duration the screen is up...there is a lot more words on there but I don't have time to read it all. Then it goes to the option screen to restart or start in safe mode...which is what I'm in at this time.
View 14 Replies View RelatedI get a blue screen then it restarts in a loop, so I have tried to start in safe mode however this reads the hard drive then goes into a similar loop of getting a blue screen and restarting. I have the windows XP disk and code, but wondered whether by reinstalling windows all data would be lost? I would, if at all possible prefer to get the data from the hard-drive, is there any way to do this. Also, I am not entirely sure on how to re-install it anyway.
View 3 Replies View RelatedI now get a BSOD saying: BAD_POOL_CALLER and the tech info says:*** STOP: 0X000000C2 (0x00000007, 0x00000CD4, 0xc033F175, 0xF77C0AFC)This is even when I try to boot in fail safe mode.Is there a way to get past this?
View 5 Replies View RelatedWhen trying to start XP Media Center 2005 in safe mode, it completes loading Mups.sys, the screen goes blank and flickers slightly like it's changing video modes, and i get a "BSOD"/blue screen (photo attached)The computer boots normally in XP when booted normally, and in Kubuntu 7.04/Feisty and Kubuntu 7.10/ Gutsy when booted normally and in recovery mode.I suspect the problem may have to do with the failed install of the Netscape Activex Wrapper Plugin from buzzen.com which (supposedly) lets Gecko-based browsers run Activex scripts intended for IE7, but I'm not sure as I haven't used safe mode in some time
View 10 Replies View RelatedI've got some particularly nasty stuff on my system (running XP Home Edition), so I want to do a scan in Safe Mode. However, whenever I select safe mode, my screen tells me that the signal is out of range, and underneath that it says "35.5KHz / 87Hz". I have a Sony screen, in case that helps any. I looked around for solutions, but all I found were some fixes for when this happens on normal Windows, which involves going into Safe Mode. So no dice. I also tried VGA, but the picture is so horrible I have no idea what is on the screen.
View 7 Replies View Relatedi have windows home xp edtion on parkard bell.in safe mode it is fine,but when on normal bootup mode it will hang up after 2mins aprox(then restart saying crit error,check hardware etc and being to dump files kernel),on a blue screen.
View 2 Replies View RelatedWhen my computer boots up, about 5 seconds after the desktop loads, my screen turns blue with the Physical Memory Dump Error
Stop: 0x0000008E (0xC0000005, 0xEDACCB75, 0xeB6E67F0, 0x0000000)
It boots up in safe mode fine, I have tried system restore and ran multiple virus/malware scans.
When my computer loads up,after the bios i get a black screen. I am unable to enter safe mode or even boot from the Windows XP.
View 8 Replies View RelatedWhen I start PC, it automatically takes me to the startup options part to reboot in safe mode, safe mode w/ networking, safemode w/ prompt, last known good config, & normal startup. Getting Stop c0000218 {Registry File Failure} The registry cannot load the hive (file) SystemRootSystem32Config
View 11 Replies View RelatedI just want to know how to change screen resolution in safe mode. The reason is when I try to use certain programs in safe mode, I can't view all the options and buttons of the program because it goes off the screen and resizing dosent help.I go to desktop properties and try to change it but the bar will not slide to any other position.
View 4 Replies View RelatedPC is Extreemly slow to logon taking over 15min to display the background and icons. Launching even the Task Manager then takes 3-5mins and even longer to update. Action Taken to-date: all executed in *SAFE MODE*
Un-installed numerous suspicious apps (eg 3 copies of Kazaa), re-created the hosts files which was blocking access to all AV sites. Using CWShredder, Ad-Aware, SpybotE, Ewido Antimalware and AVG's "vcleaner.exe" I have removed all "extras" from the Start-Up menu, removed 6 viruses and isolated at least 2 "auto-dialers" as well as eliminating a number of wacky non-windows services.I have run SpyOnThis and HijackThis to produce some logs but this is off-course in SAFE-MODE
I have some nasty virus. My computer rebooted after a serious error and after I could not start IE nor could I run virus scan I tried several system restore points but each time the computer was not able to restore. I tried to open in safe mode but after using F8 on reboot my arrow keys would not work to select safe mode and the boot continued with normal startup. I went into cmd and selected safe mode startup but once again my arrow keys wouldn't work to select safe mode anything other than normal which is a highlighted on page. Since I selected safe startup in cmd and I cannot choose safe startup on the boot page my computer is in a loop of constantly trying to bootup
View 11 Replies View RelatedI have a lab of computers all running Windows XP Pro sp2, hooked up to a domain.Is there a way to restrict safe mode access to only administrators (or only local accounts? I don't want any of the limited user domain accounts to be able to log onto safe mode, as it allows them to circumvent certain restrictions that I need to have in place. Is this possible at all, and if not, is there some sort of work around I could use?
View 1 Replies View RelatedComputer running Windows XP SP3 which appears to be horrible bogged down with viruses. So much so that when I simply tried reinstalling avg the next time I rebooted the computer I found myself unable to do anything other than log in. From that point the system freezes
I've been trying to get into safe mode since then, holding down f5 or f8 at startup brings me to the boot selection screen but if I select anything other than Start Windows Normally it will just restart and bring me back to the same screen. I've also been unable to get into msconfig from windows
I cannot on starting/restarting Compaq Presario, XP SP2 access either the Bios nor Safe Mode using any of the function keys when CPU is starting up. I have to go to BOOT.INIT to select the Safe Mode and then restart
View 1 Replies View RelatedI am trying to uncheck one item in config in an attempt to avoid a conflict with Roxio Media Centre 9. I can uncheck the apprpriate box but when I click apply I get the message 'access denied - you may need to log on as administrator to make changes'. The snag is, I am logged on as administrator. I have tried to boot in safe mode but can not Despite trying f8, f12, :sfc / scannow
View 2 Replies View RelatedAfter running virus scans in Safe mode I attempted to restart into Normal mode but the computer just hung at the boot screen indefinately. I finally forced it off. When I switched it back on it gave me the usual black screen saying "Windows did not shut down successfully" and instructed me to use the arrow keys to choose how to start windows, otherwise it would load the "last known successful configuration"
However at this screen only the arrow keys do not react, making it impossible for me to select Safe mode, and although Safe mode was actually the last successful configuration, it proceeds to attempt to load Normal mode and stops at the login screen every time
I had a problem with windows xp rebooting after everytime during the loading screen. I tried doing chkdsk /k with no use and then I tried to repair the installation. Now i can't finish the setup and can't access safe mode because it says. Windows XP setup can't run in safe mode.
View 1 Replies View RelatedI'm using Windows XP Professional. I am not able to log back into my Administrator account. I'm stuck in a limited user account and though my Administrator account is set w/o a password, I still can't login, even through my computer's Safe Mode (which is was the Dell service person suggested
This problem occurred yesterday while I was trying to eliminate the login screen from my computer's startup. Initially, I used a tip from Annoyances.org by entering "control userpasswords2" in the Run menu and turning off the "Users must enter a user name and password to use this computer" option
Needing to re-establish file ownership of a rather large directory,and to do so I need access to my firewire drive in safe mode. Is this possible?
View 8 Replies View RelatedI cannot get Windows XP to boot up even under the f-8 admin safe mode.Also, when it does act like it's going to start, the 'BLUE PROGRESS BUBBLE BAR' stops and freezes on the last 'BLUE BUBBLE', what's with that?
View 1 Replies View RelatedI was having problems with my XP 2005 Media Edition desktop freezing while watching TV so I uninstalled the ATI Radeon Connect3D 9600 256mb video card. It restarted no problem. I lowered the resolution to 800x600, no problem. I turned on the media center and let it sit for a bit. It froze. Now on start up I get the following: Windows could not start because the following file is missing or corrupt WINDOWSSYSTEM32CONFIGSYSTEM
View 14 Replies View RelatedI am not really a computer whizzkid but am not afraid to give most things a go ever since powering down for a holiday my xp start up is in a loop. Clicking f8 and trying to access safe mode doesn't work either. Have tried "last known settings" but still no luck although it does get me a bit further but then I get the message ODBC32.dll was not found in the winlogon.exe box. Then MPR.dll was not found message appears. Is there anyway I can access the c prompt and do anything or should I have a restore disc somewhere that I haven't found supplied when I purchased the PC
View 5 Replies View RelatedI have a IBM Thinkpad that was setup for use on a domain. I know I have a trojan that has affected my ability to start my computer normally. After I enter in my username and password I let it sit for over eight hours today but I never came to the desktop. I could move the cursor but I never was able to access the desktop
When I tried to access safe mode I don't know any of the local user names or passwords. I also don't know the admin password. What options do I have to access safe mode somehow clear this trojan? I was told I had a trojan before I restarted my computer
Have been trying to fix my dad's computer which has been having a series of Blue screen problems realated to BAD_POOL_CALLER. Followed advice on Microsoft site and invoked Driver Verifier Manager and used Standard settings.
system won't reboot at all. I can get into BIOS area but once it continues past that the wireless keyboard is disabled and therefore I can't select Safe Mode or Last working config mode. It continues into Windows XP and then crashes and reboots again.Ideally I need to be able to make the wireless keyboard work so I can get into Safe Mode,uninvoke the Driver Verifier somehow at the BIOS stage