Unable To Use Safe Mode With LCD Screen
Mar 29, 2005
I've got some particularly nasty stuff on my system (running XP Home Edition), so I want to do a scan in Safe Mode. However, whenever I select safe mode, my screen tells me that the signal is out of range, and underneath that it says "35.5KHz / 87Hz". I have a Sony screen, in case that helps any. I looked around for solutions, but all I found were some fixes for when this happens on normal Windows, which involves going into Safe Mode. So no dice. I also tried VGA, but the picture is so horrible I have no idea what is on the screen.
View 7 Replies
ADVERTISEMENT
Aug 19, 2009
I used to be able to access it perfectly fine but i went to safe mode and got the blue screen with the 0x0000007B error. My windows works fine but the safe mode.I know it was caused by a virus, i just don't know how to fix it.I scanned with everything but still could not find it
View 12 Replies
View Related
Jun 4, 2008
When my computer loads up,after the bios i get a black screen. I am unable to enter safe mode or even boot from the Windows XP.
View 8 Replies
View Related
Apr 25, 2007
I just want to know how to change screen resolution in safe mode. The reason is when I try to use certain programs in safe mode, I can't view all the options and buttons of the program because it goes off the screen and resizing dosent help.I go to desktop properties and try to change it but the bar will not slide to any other position.
View 4 Replies
View Related
May 1, 2008
Really feeling desperate here. Win xp home. The only way I can get to my desktop without waiting 25 minutes AND having start button and others freeze up and then taking 5 min for each click, I have to first go to Safe Mode and change sometihng in mcsonfig and then restart.
Then I use Normal Mode and get to my desktop with no problem and nothing freezes BUT I then have to reset all my SERVICES in "Sevices ans applications" since they become disabled each time I use Safe Mode. Note: I made sure to diable all unnecessary servies and use only the startups I need in msconfig.
All very time consuming and debilitating. Then I can get online and everything is fine.BUT then each time I shut down or restart my computer its the same cycle all over again. Note: The problem seemed to occur when one day semingly out of nowhere I turned on my compuyer and my logon was apparently corrupted. NO spyware, viruses. Clean machine. When I got to my desktop there was a white screen as oppsoed to blue with an alert to restore my desktop. But when I clicked the restore button notihng happened. Someone told me I may have a corrupt logon name and to set up another which I did and everything wokred fine except for, as I said, when I shut down or restart my computer.
I tried system restore but apparently there are no options/dates to restore back to.
Ive spent 200 hours on this and am ready to throw in the towel. I dont want ot have to resort to a clean reinstall of Winxp but if I have ot can you please inform me about how to keep my files intact (pdfs, word docs and pictures). and if I need to back them up,
View 10 Replies
View Related
Jan 18, 2010
I was just using my PC like any other day. Now I am saddened by the fact that I have a BSOD and being unable to use safe mode or trying any other solution just makes me even more sad.
Things Tried That Failed:
Safe Mode
System Recovery
Clean Install of Windows 7
Couldn't keep track of all....
View 1 Replies
View Related
Jun 7, 2006
I started windows Xp in safe mode and my mouse wont respond. I have a serial mouse not a USB mouse.
View 3 Replies
View Related
Dec 19, 2006
On starting up my PC I am unable to get past the initial BIOS readout it gets as far as 'Mouse Initialized' and then freezes. Pressing F8 does not work nor following the displayed message 'Press F2 to enter SETUP'
View 2 Replies
View Related
Apr 1, 2007
About 2 years ago my computer randomly shut down (I think because of a virus), and when I tried starting it back up, it would bootup fine, but I could never get past the XP Pro login screen. The passwords/accounts are fine. I only have one password-protected account, which is mine, and the password is still valid. I also have an additional account for my sister without a password. Whenever I try to login to either account, it displays the "Loading account settings." dialogue but doesn't do ANYTHING after that, it never logs in. I tried booting my computer into safemode, but then it gets to a login screen for Administrator, and apparently there's a password that I guess I set a long time ago, and I have no clue what it is and can't log in. I tried logging in WITHOUT putting an administrator password in since I know you can sometimes do that with XP Home, but I had no luck. Is there anything I can do to fix this? Is there a way I can log in somehow? Is it a virus? Also, if I were to somehow get into the computer by setting up an additional XP partition, would I still have access to all of my files? THe reason I ask is because I saved a LOT of IMPORTANT work-related files into the "My Documents" folders for my account...is there a way I can access any of that?
View 2 Replies
View Related
Nov 30, 2006
I am running xp pro. When rebooting I get a screen asking for the boot order. The thing is that I cannot choose because I tried selecting them with the page up-down, the up down arrows and the tad key and nothing moves. It will not go pass this screen. I have to reset anf let it bootup normal. What am I doing wrong?
View 6 Replies
View Related
Aug 12, 2007
I have recently come down with the Smitfraud trojan and have downloaded the command prompt program "SmitfraudFix" to hunt down and terminate my infection. However, the actual "killing process" that SmitfraudFix undergoes requires SafeMode to work correctly (I would assume so it does not harm other normal files). It would seem simple: log into Safe Mode and execute the prompt. Yet here is my problem! I have a laptop that was given to me by my college and instead of having my primary user account (which is given full administrator capabilities, but is not the actual Administrator account) as a "this computer" domain to log in, it logs in under the "GCC" domain (I go to Grove City College).
I would not have imagined this to ever be a problem, but when I start up Safe Mode to execute my trojan-killer I am given only two login fields, not three. Thus I have username and password inputs, but no "log on to" option to choose "GCC." So when I type in my username and password in Safe Mode they are (I presume) assumed to be "this computer" domain inputs. I think you can see where this is going...........
View 1 Replies
View Related
Apr 11, 2010
Got into safe mode trying to acces Adminatrator and use can't type in pass word. can't get out of user into adminasrtaor
View 2 Replies
View Related
Jul 11, 2007
i am unable to load my computer into safe mode,it hangs when it is loading agp440.sys.im running Windows XP SP2.
View 7 Replies
View Related
Sep 2, 2005
Is it possible to get to safe mode when you use the original XP CD to boot?
View 7 Replies
View Related
Nov 3, 2009
I am trying to boot into safe mode in Windows XP (office) to deal with trojan horses (Vundo.gen.w/spy-agent.bw.gen.e) infections. I am able to get to the safe mode option screen via "f8", but it will only load some drivers and then it returns to the safe mode option screen (endless loop).
Further I cannot access the system config utility via "run". I open up the run dialog box and type "msconfig" nothing happens.
An ideas? What would happen if I run a full virus scan (with system restore off) without being in safe mode?
View 8 Replies
View Related
Jul 21, 2009
Very simple problem; my Win XP computer will get up to the Windows XP loading page (the black page with the blue bar moving in the middle), it then gets stuck for about 2/3 minutes and just restarts time and time over again.I do NOT have a virus of any kind, I know this for sure as Safe Mode works and I took an antivirus scan - no virus at all, so I need some help here.
View 10 Replies
View Related
Oct 7, 2007
Very similar to the following problem but i do not have a raid, and it seems that this PC has a raid and i don't, plus it was never really determined what the actual solution was.
http://forums.techguy.org/windows-nt...oot-black.html
The basics: XP Professional Boot up screen, right before the windows loading screen, or direct after the F8 Menu if you hit "Start Windows Normally..." it will just lock up, no HDD activity, blank screen. now BSOD, nothing.
All 3 safe mods work fine.
Ran chkdsk /r in recovery.
Ran proper fixboot procedure.
Went into safe mode and checked the event viewer.
The only concerning message i got was: The following boot-start or system-start driver(s) failed to load:
AmdK8
Fips
nod32drv
Formatting really isnt an issue since i can back up anything i need through safe mode. However its just the fact that the Windows gremlin has struck me again and i must defeat it once more.
I highly doubt this is a hardware issue as it is more of a driver/software issue.any help?
View 2 Replies
View Related
Jan 8, 2006
I Installed A New Programme Which Was Downloaded From Bit Torrent
Blue Screen - Memory Dump
Rebooted And Now It Just Hangs On Windows Xp Logo Screen.
Tried To Boot Using Safe Mode But No Joy.
Also Tried To Use The Restore Disks And The Xp Disk Itself But It Would Not Boot From Those.
What Do I Do Now? I Dont Want To Format The Drive And Loose All My Files.
View 2 Replies
View Related
Oct 8, 2007
I'm having a problem starting my computer running windows XP home edition. Upon startup, I get the blue screen stating... "stop: c0000135 {unable to locate component} This application has failed to start because RPCRT4.dll was not found. Re-installing the
application may fix this problem."Also, I am unable to boot in safe mode (same RPCRT4.dll error).i have tried repairing with original xp disk when using chkdsk /p it finds one or more errors on disk but does not solve the problem.
View 1 Replies
View Related
Aug 26, 2005
Ok hereS the problem... I'm using Windows XP Home edition with SP 2, I was having some problems with my Mcafee anti-virus software, so I booted up in Safe mode (using msconfig) to do a system virus scan. Once I did that, I tried to load msconfig to get back into normal mode, but i kept getting an error saying I must be logged in as the Administrator to do it, Which I was. Can someone please help me get back into normal mode so I don't have to reformat? Also: I do not have system restore enabled so that is not an option.
View 3 Replies
View Related
Jan 19, 2005
I'm trying to delete the index.dat file off my XP name but when i go into safe mode it wont let be open my name.Any idea what the problem may be cause i cant open any of the names except my brothers xp name for some odd reason
View 14 Replies
View Related
Oct 13, 2007
I am new to post on this site, in the past i've read many posts on it when i had computer problems, and found a solution, except this time so here it goes
I updated SpySweeper to the newest version. My computer is now SLOW so i tried to uninstall it. I tried doing so through Add/Remove Programs. Also tried going through 'start,run'..then locating the file to uninstall. I get the following 'Cannot uninstall - Runtime Error (at 219.73) could not proc.'SO tried going through Safe Mode and then my computer started running CHKDSK, which came back with about 20+ unreadable file segments the just started back in Normal mode. I also tried ctrl alt&delete to stop spysweeper processes and that says "access is denied'.
View 1 Replies
View Related
Apr 2, 2007
It started yesterday, I was playing around on the computer and only downloaded magiciso.I continued to play around. I shut down the computer and it hasnt been the same since.When it 1st started back up..I got this:Address 80410527 base at 80400000 datestamp 45069e6e - ntoskrnl.exe IRQL not less or equal I tried to get into safe mode but nothing.I then tried last good config and it let me in...so I played around to what I thought would fix things..but when I restarted it again..it wont let me in either way now.
View 2 Replies
View Related
Aug 16, 2005
Running a computer I purchased with Windows XP Pro installed (No CD). Will
not enter SAFE MODE when tapping F8 during bootup. Would not enter safe mode
even after deliberately crashing the computer (pulled the power cord while
computer was running).
View 5 Replies
View Related
Aug 9, 2005
I can't get Updates to XP SP2 and in the process of trying to do so, I'm instructed to reboot, continuing to press F8, and get into "Safe Mode". When I do that, I'm not given an option to get into Safe Mode but am given an option on which of three devices to boot.How can I get to Safe Mode?
View 7 Replies
View Related
Jul 12, 2008
i have reinstalled xp home on my dell pc, but now the screen looks like it does when you use safe mode. also i cant connect to the internet.
View 10 Replies
View Related
Jul 15, 2009
i am working on this computer for a customer it has windows xp when you start it up you get the xp splash screen and that's it no user accounts just comes up to a black screen will not start to safe mode no last known good no safe mode with command prompt no safe mode with networking just keep getting black screen.
View 9 Replies
View Related
Nov 11, 2006
My computer starts up and then continues in an ifinite restarting cycleWell, when I try to turn my computer on, it starts to load but then goes to a black screen saying some thing like:Your computer encountered a problem...it may have been bacuse of...or power failures...hard driveIt also says to click Safe Mode, Start Windows Normally or Same Configuration with a little timer at the bottomif I press enter for Start Normally or Same Config, it goes to a loading page and then shuts down and restarts going baack to the black screen. Restarting and Restarting and restarting
View 11 Replies
View Related
Jun 23, 2006
Running XP Pro and never had a problem. Since last night it has refused to boot. After doing the XP loading screen for normal time, it loads a black screen with the mouse, and nothing else. I've waited over fifteen minutes and it does nothing. After a few clicks, the error speaker beeps and the mouse freezes. Tried loading in safe mode, and it gives a black screen with all the safe mode text around the screen. Anyone had any experience with this?
View 14 Replies
View Related
May 27, 2010
Updated my computer using automatic updates. I unfortunately didn't pay attention to the updates that were being installed. After a restart, I got the following error:
A problem has been detected and windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen sppears again, follow these steps: Check to be sure you have adequate disk space. If a drive is identified in the stop message, disable the driver of check the manufacturer for driver updates. Check with our hardware vendor for any BIOS updates. Disable any memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press f8 to select advanced startup options, and then slect safe mode.
View 4 Replies
View Related
Jan 25, 2006
I tried booting into "Safe Mode" to defrag my computer. Before it goes into "Safe Mode" I get a blue screen stating that "I must remove improperly installed software to proceed". I have not installed any software. I have replaced my cd-rom burner and it is working properly. Any ideas on how a I may access "Safe Mode"??
I am running 2000 pro. Also is there a way I can see what the "Administrative Password" on Win 2000 pro.?
I set up a friends computer with 2000 and I didn't enter a password. Apparently, someone else has entered one but can not remember it, thus their computer is useless without the password.
View 6 Replies
View Related
