I am running xp pro. When rebooting I get a screen asking for the boot order. The thing is that I cannot choose because I tried selecting them with the page up-down, the up down arrows and the tad key and nothing moves. It will not go pass this screen. I have to reset anf let it bootup normal. What am I doing wrong?
View 6 Replies
My computer will start-up in safe mode only (at least it looks like safe mode), even when I don't hit pf8 and choose safe mode. I've tried to use system restore once I'm in under safe mode, but when I click on it, I get an empty box and am not able to choose a date.
View 1 Replies View RelatedI let my roommate use it and look what happened... Good thing I already had a new one.
Compaq laptop running XP has been on "time out' hoping for a change of attitude, no such luck.
Today I tried to put her in Safe Mode and got as far as the "Windows" screen with those 3 blue squares continually cycling. That is as far as she seems willing to go.
Upon returning home from work today, I noticed all the lights were out on my cable modem. I moved my mouse and the monitor stayed black. I then looked down at the CPU and both the green power light and the yellowish reset light were on. I don't know if power cut off during the day or not because my monitor light was flashing and my router lights were on. I plugged in my modem into a different outlet and it came on. I pushed the power button to power down the unit. After waiting about 30 seconds, I powered the unit back up. Things were going good, then I came up the screen that said Windows experienced a problem starting which could be caused by a new configuration... and if the power had gone out of if you didn't know what happened to choose Starts Windows Normally. I selected Safe Mode first, it went through and came directly back to this screen.
View 14 Replies View RelatedI'm having a problem with my Laptop which has just started locking up seconds after switching on after crashing.I was chatting on MSN and sent a message, and at the moment i hit enter the thing froze and i had no choice but to pull the plug since it wasnt responding in any way. Then when i tried to start it up again, it wouldnt. It gets to the screen where it gives you the options (eg. DEL > Setup F8 > Boot Menu etc) and a few lines of text afterwards and then just stops.I've tried going on each of the options (setup. boot menu, boot network) but it just changes to GO > Setup or whatever, then gets the same line of text below and stops. I cant get to the safe mode screen, and i cant seem to Boot from any CD's either
View 2 Replies View RelatedStarts up in safe mode and says'windows did not shut down properly'no matter what he clicks on, it goes back into safe mode as if it is in a loophe says, then he is presented with the same message again.so,hes stuck in safe mode. i told him to press the windows logo and the letter u twice which i saw in tips n tricks but no joy there.
View 9 Replies View RelatedI'm using Windows XP Professional. I am not able to log back into my Administrator account. I'm stuck in a limited user account and though my Administrator account is set w/o a password, I still can't login, even through my computer's Safe Mode which is was the Dell service person suggested
I was trying to eliminate the login screen from my computer's startup. Initially, I used a tip from Annoyances.org by entering "control userpasswords2" in the Run menu and turning off the "Users must enter a user name and password to use this computer" option
as above, pentium 4 windoiws xp black screen on startup cannot see bios menu or get to safe mode.
View 1 Replies View RelatedMy desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
View 4 Replies View RelatedI had been away from my computer for about an hour and when i returned the screen was black and nothing would change it so hit the restart button. When the computer started up, I first saw the usual blue dell logo-screen, however, the next screen was the windows 98 startup logo-screen. The computer then entered DOS mode and at the top of the screen it says Microsoft Windows 98. This problem persists every time i start the computer. I only have 1 primary partion and i installed XP on it from a clean install by using a win98 bootdisk to format and running winnt from the i386 folder of the xp cd. When i try to enter SAFE MODE the computer goes to the Win 98 start-up logo screen again and enters DOS again. I know that all my files are still on the HDD because i can navigate through them. All i really want to do is somehow save some files that are on te HDD so i can just format and reinstall XP.
View 4 Replies View RelatedReally feeling desperate here. Win xp home. The only way I can get to my desktop without waiting 25 minutes AND having start button and others freeze up and then taking 5 min for each click, I have to first go to Safe Mode and change sometihng in mcsonfig and then restart.
Then I use Normal Mode and get to my desktop with no problem and nothing freezes BUT I then have to reset all my SERVICES in "Sevices ans applications" since they become disabled each time I use Safe Mode. Note: I made sure to diable all unnecessary servies and use only the startups I need in msconfig.
All very time consuming and debilitating. Then I can get online and everything is fine.BUT then each time I shut down or restart my computer its the same cycle all over again. Note: The problem seemed to occur when one day semingly out of nowhere I turned on my compuyer and my logon was apparently corrupted. NO spyware, viruses. Clean machine. When I got to my desktop there was a white screen as oppsoed to blue with an alert to restore my desktop. But when I clicked the restore button notihng happened. Someone told me I may have a corrupt logon name and to set up another which I did and everything wokred fine except for, as I said, when I shut down or restart my computer.
I tried system restore but apparently there are no options/dates to restore back to.
Ive spent 200 hours on this and am ready to throw in the towel. I dont want ot have to resort to a clean reinstall of Winxp but if I have ot can you please inform me about how to keep my files intact (pdfs, word docs and pictures). and if I need to back them up,
I was just using my PC like any other day. Now I am saddened by the fact that I have a BSOD and being unable to use safe mode or trying any other solution just makes me even more sad.
Things Tried That Failed:
Safe Mode
System Recovery
Clean Install of Windows 7
Couldn't keep track of all....
I started windows Xp in safe mode and my mouse wont respond. I have a serial mouse not a USB mouse.
View 3 Replies View RelatedOn starting up my PC I am unable to get past the initial BIOS readout it gets as far as 'Mouse Initialized' and then freezes. Pressing F8 does not work nor following the displayed message 'Press F2 to enter SETUP'
View 2 Replies View RelatedAbout 2 years ago my computer randomly shut down (I think because of a virus), and when I tried starting it back up, it would bootup fine, but I could never get past the XP Pro login screen. The passwords/accounts are fine. I only have one password-protected account, which is mine, and the password is still valid. I also have an additional account for my sister without a password. Whenever I try to login to either account, it displays the "Loading account settings." dialogue but doesn't do ANYTHING after that, it never logs in. I tried booting my computer into safemode, but then it gets to a login screen for Administrator, and apparently there's a password that I guess I set a long time ago, and I have no clue what it is and can't log in. I tried logging in WITHOUT putting an administrator password in since I know you can sometimes do that with XP Home, but I had no luck. Is there anything I can do to fix this? Is there a way I can log in somehow? Is it a virus? Also, if I were to somehow get into the computer by setting up an additional XP partition, would I still have access to all of my files? THe reason I ask is because I saved a LOT of IMPORTANT work-related files into the "My Documents" folders for my account...is there a way I can access any of that?
View 2 Replies View RelatedI've got some particularly nasty stuff on my system (running XP Home Edition), so I want to do a scan in Safe Mode. However, whenever I select safe mode, my screen tells me that the signal is out of range, and underneath that it says "35.5KHz / 87Hz". I have a Sony screen, in case that helps any. I looked around for solutions, but all I found were some fixes for when this happens on normal Windows, which involves going into Safe Mode. So no dice. I also tried VGA, but the picture is so horrible I have no idea what is on the screen.
View 7 Replies View RelatedI have recently come down with the Smitfraud trojan and have downloaded the command prompt program "SmitfraudFix" to hunt down and terminate my infection. However, the actual "killing process" that SmitfraudFix undergoes requires SafeMode to work correctly (I would assume so it does not harm other normal files). It would seem simple: log into Safe Mode and execute the prompt. Yet here is my problem! I have a laptop that was given to me by my college and instead of having my primary user account (which is given full administrator capabilities, but is not the actual Administrator account) as a "this computer" domain to log in, it logs in under the "GCC" domain (I go to Grove City College).
I would not have imagined this to ever be a problem, but when I start up Safe Mode to execute my trojan-killer I am given only two login fields, not three. Thus I have username and password inputs, but no "log on to" option to choose "GCC." So when I type in my username and password in Safe Mode they are (I presume) assumed to be "this computer" domain inputs. I think you can see where this is going...........
Got into safe mode trying to acces Adminatrator and use can't type in pass word. can't get out of user into adminasrtaor
View 2 Replies View Relatedi am unable to load my computer into safe mode,it hangs when it is loading agp440.sys.im running Windows XP SP2.
View 7 Replies View RelatedIs it possible to get to safe mode when you use the original XP CD to boot?
View 7 Replies View RelatedI am trying to boot into safe mode in Windows XP (office) to deal with trojan horses (Vundo.gen.w/spy-agent.bw.gen.e) infections. I am able to get to the safe mode option screen via "f8", but it will only load some drivers and then it returns to the safe mode option screen (endless loop).
Further I cannot access the system config utility via "run". I open up the run dialog box and type "msconfig" nothing happens.
An ideas? What would happen if I run a full virus scan (with system restore off) without being in safe mode?
Very simple problem; my Win XP computer will get up to the Windows XP loading page (the black page with the blue bar moving in the middle), it then gets stuck for about 2/3 minutes and just restarts time and time over again.I do NOT have a virus of any kind, I know this for sure as Safe Mode works and I took an antivirus scan - no virus at all, so I need some help here.
View 10 Replies View RelatedI used to be able to access it perfectly fine but i went to safe mode and got the blue screen with the 0x0000007B error. My windows works fine but the safe mode.I know it was caused by a virus, i just don't know how to fix it.I scanned with everything but still could not find it
View 12 Replies View RelatedI'm having a problem starting my computer running windows XP home edition. Upon startup, I get the blue screen stating... "stop: c0000135 {unable to locate component} This application has failed to start because RPCRT4.dll was not found. Re-installing the
application may fix this problem."Also, I am unable to boot in safe mode (same RPCRT4.dll error).i have tried repairing with original xp disk when using chkdsk /p it finds one or more errors on disk but does not solve the problem.
Ok hereS the problem... I'm using Windows XP Home edition with SP 2, I was having some problems with my Mcafee anti-virus software, so I booted up in Safe mode (using msconfig) to do a system virus scan. Once I did that, I tried to load msconfig to get back into normal mode, but i kept getting an error saying I must be logged in as the Administrator to do it, Which I was. Can someone please help me get back into normal mode so I don't have to reformat? Also: I do not have system restore enabled so that is not an option.
View 3 Replies View RelatedI'm trying to delete the index.dat file off my XP name but when i go into safe mode it wont let be open my name.Any idea what the problem may be cause i cant open any of the names except my brothers xp name for some odd reason
View 14 Replies View RelatedWhen I start PC, it automatically takes me to the startup options part to reboot in safe mode, safe mode w/ networking, safemode w/ prompt, last known good config, & normal startup. Getting Stop c0000218 {Registry File Failure} The registry cannot load the hive (file) SystemRootSystem32Config
View 11 Replies View RelatedWhen my computer loads up,after the bios i get a black screen. I am unable to enter safe mode or even boot from the Windows XP.
View 8 Replies View RelatedI am new to post on this site, in the past i've read many posts on it when i had computer problems, and found a solution, except this time so here it goes
I updated SpySweeper to the newest version. My computer is now SLOW so i tried to uninstall it. I tried doing so through Add/Remove Programs. Also tried going through 'start,run'..then locating the file to uninstall. I get the following 'Cannot uninstall - Runtime Error (at 219.73) could not proc.'SO tried going through Safe Mode and then my computer started running CHKDSK, which came back with about 20+ unreadable file segments the just started back in Normal mode. I also tried ctrl alt&delete to stop spysweeper processes and that says "access is denied'.
It started yesterday, I was playing around on the computer and only downloaded magiciso.I continued to play around. I shut down the computer and it hasnt been the same since.When it 1st started back up..I got this:Address 80410527 base at 80400000 datestamp 45069e6e - ntoskrnl.exe IRQL not less or equal I tried to get into safe mode but nothing.I then tried last good config and it let me in...so I played around to what I thought would fix things..but when I restarted it again..it wont let me in either way now.
View 2 Replies View RelatedRunning a computer I purchased with Windows XP Pro installed (No CD). Will
not enter SAFE MODE when tapping F8 during bootup. Would not enter safe mode
even after deliberately crashing the computer (pulled the power cord while
computer was running).
