Getting Stop Error And Facing Blue Screen Upon Startup?
Mar 15, 2008
My granddaughter downloaded some kind of game on my computer yesterday she said that while she was playing a box came up and the screen went blue well it has been blue ever since the error Disable or uninstall any anitvirus disk defragmentation or back utilities Check your hard drive configuation and check for updated drivers Run chksk/f to check for hard drive corruption and then restart your computer techincal info stop:oxooooo24(oxoo190203,0x81364008 ,oxcooo102 ,oxooooooo)
I have a IMB Thinkpad Laptop running Windows XP that keeps giving me the same blue screen STOP message error. THis happens at random times and at random intervals. The only software installed recently was a gmail notifier and I have already uninstalled that and the blue screen continues to appear. The message is: IQRL_NOT_LESS_OR_EQUAL and recommends I disable BIOS caching and shadowing. The stop message is: ***STOP:0x0000000A (0xFF1711F2, 0x00000002, 0x00000000, 0x804D9B64)
I'm trying to help a friend with a Dell Dimension 4700 desktop with XP home. It suddenly started getting a BSOD with some error messages. Now here's the big problem. The computer doesn't recognize the disk. I've gone into setup and changed it to boot from the DVD-ROM. It still doesn't recognize the CD-ROM. Actually, it has a CD-ROM and a DVD-ROM. BIOS only see's one of them but I've changed the plugs to both of them to eliminate the bad one and still nothing. It's set to boot to the DVD.
I'm getting a BSOD with the following Stop Error DRIVER_IRQL_NOT_LESS_OF_EQUAL *** STOP:0x000000D1(0x00000018,0x00000002,0x00000000, 0xF72BD25F) iastor.sys - Adress F72BD25F base at F72AE000 DateStamp 42b2df42 This happens every time I start up and also I am unable to boot into Safe Mode as it is getting hung on whatever file is after Mup.sys.My plan was to go into safe mode and update iastor.sys to a newer version but I cant. I also find it stange that this file is an issue as I only have a single hard drive and I was under the impression that this file had something to do with RAID.
2 months ago I ordered system from Cyberpower PC and it was shipped a week later.Set it all up,formatted Windows XP Home Edition and got it running. Shortly there after, I started blue screening and it seemed RAM related, so I swapped the sticks and it seemed I would only BSOD with one of the sticks, so I called the company, shipped it back, and got a new stick.
Then I started to BSOD again with the error message of IRQL_LESS_OR_NOT_EQUAL and then 0x0000000A (0x0000F78A, 0x0000002, 0x0000001, 0x806E4A8F), and this particular error would only occur while I was playing World of Warcraft. So first I pulled the new stick of RAM and tried playing... and everything went fine for a day, and then I BSOD'd again, same error
a client of mine has a compaq desktop.windows was starting up and then blue screening (you know the one,run a anti virus scan uninstall any drivers She told me that she doesn't have up to date anti-virus...and that the system was warning her about a virus.I ran ERD commander (the windows live cd) and when it got to the menu there was no partition to work on...no windows found.i have since slaved it to my desktop and no drive was found.but when i go to disk manager the space is there...disk 0 40GB healthy (looks no different to my os partition)but when i right click it and properties it says local disk file system
My computer keeps giving me this error when I start it up Stop: c0000218 Unknown Hard Error Unknown Hard Error I can boot it into safe mode, but I'm unable to really do anything with it. When I try to go on the internet I get directed to a Yahoo search of whatever I entered into the address bar... and any links clicked bring me to random pages. I also noticed that the address of the link in the search isn't showing up in the status bar.
My mom was on my computer this afternoon and there was a power surge. When the power came back on, the computer would not come back on. When I booted my computer up this evening, everything was fine until midway into the startup sequence and I closed Yahoo! Messenger. Right after I did that I got the BSOD (BAD_POOL_HEADER) and the Stop errors at 0x00000019, (0x00000020, 0xE2B9E8F0, 0xE2B9E918, 0x0C050801). After restart, I tried to load HJT and I got an Explorer.EXE Application Error: The instruction at 0x7c91142e referenced memory at 0x00650072. The memory could not be read.
About my BSOD problem w/ my Windows 2000 Professional 2Pk operating system. Computer will not startup properly then goes to blue screen
I've been looking for help online and speaking to people but everyone is down on me for still using Windows 2000 Professional. Am willing to upgrade to XP if I can figure out the current problem
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this? Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose. Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
Four or five months ago I installed a new HD in my Dell Inpiron 700m laptop. I used Acronis True Image, as I've done previously with my Latitude. Initially, I had some trouble, because apparantly one or two drivers were missing. I found a discussion about this online and ran through the steps to fix the problem and everything seemed fine. A couple days after the installation I received the blue stop error screen for the first time. Restarted the computer and hadn't had it appear again until last week. The other night, it was coming up every five minutes, shutting down the computer.
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
When I start PC, it automatically takes me to the startup options part to reboot in safe mode, safe mode w/ networking, safemode w/ prompt, last known good config, & normal startup. Getting Stop c0000218 {Registry File Failure} The registry cannot load the hive (file) SystemRootSystem32Config
I get this almost everyday, I even restored the laptop to how it was out of box and it keeps crashing. Here is the error.MULTIPLE_COMPLETE_REQUESTS ***STOP: 0x00000044 (0x862df368, 0x00000D60, 0x00000000,0x00000000)
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows: Kernel-Data-inpage-error stop error screen then there are a lot of numbers etc. I have sometimes noticed a slight change in fan noise prior to freeze (speeding up) After reebot everything's back to normal.........
my comp was giving me this prob, where it would suddenly reboot and froze randomly, at that time I've not made any hardware modifications. At first i ignored the problem and kept using the comp at my own leisure... however as time passed, the frequency of reboots become more often to a point where after 5 sec from a reboot, it would reboot again and occasionally after a reboot a blue screen will pop up mentioning that windows is experiencing a prob and dumping of physical memory begins... which im not sure what is that about. After many attempts at finding the source of the probn i gave up ...and decided to go ahead with reformatting the comp.
I have a problem J, I cant get XP to boot up. My pc blue screens mid way through the loading windows screen and then re-sets. I had a GPU hardware failure, after windows automatic installed some software a month or so ago (not sure what it installed as I wasnt using the pc at the time). My pc would not post and the mbos gave a GPU beep error message. I have just brought a new GPU and now I can get to the pc to part load. Tried using my recovery cd, but that only gets half way and then blue screens with a STOP 0x000000c2 error. I think its a driver issue but as Im unable to get into the recovery to troubleshoot further, im not sure what I can do. The only thing I can do is rig up my pc hd to my laptop as a slave, does anyone know any software that can check an OS that not being used on a hd? Is there anything else I can try? I have flashed the BIOS to the latest version.
I put in My CD and it goes through the first blue screen (the one where is asks if you want to press f2 to do install drivers via A drive etc) and when it gets to "Setup is Starting up windows" (this is before all the HD formating and partitioning) I get the blue screen. it does not have much info on it all it says is:Stop: 0x0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
Toshiba Laptop My buddy just came over and has his Toshiba Laptop and it is having a blue screen stop error. Wanna see if we can get some help.He has windows 2000.you turn it on and it goes through every thing and then you put your password in and get to the desk top and all that is ok, when you click to get on the internet it would flash a blue screen and then shutdown. I went into system and advanced and unchecked auto reboot so now it doesn't shut down but you get the blue screen and you can't go anywhere when it comes up.
having my laptop returned from service I found my Bios messed with where when I would start my computer but Bios wouldn't find my hard drive or an OS I found that my system was set to RAID instead of ATA. After resetting it back to ATA it boots up fine. However I wanted to reformat and start clean.I placed my XP disk in, reset my BIOS to read my optical drive first and no problems.However every time I get to partition drive all I see is "Unknown Device" If I press any key I get a blue screen of death. Most times it's the 0X0000008E.
I have just installed a Samsung CLX-2160 on my Dell Dimension 5150 PC,which runs Windows XP Media Centre.As soon as the PC started reading the installation CD, it crashed with the following (taken from event viewer):The computer has rebooted from a bugcheck.The bugcheck was: 0x0000007e (0xc0000005, 0x804f106f, 0xba4fbaac, 0xba4fb7a8). A dump was saved in: C:WINDOWSMEMORY.DMP.
I rebooted with F8 and chose last working config.After a little enlightened guesswork and advice I removed my old Dell 725 printer driver(which had started giving an error message on startup). Now I could load the Samsung driver etc and the new printer works.However, XP still crashes whenever I reboot normally I can still bring up a working system with F8 as above (but I have to reload my PCI card drivers again - 2 port serial and sound card - for some reason)
I was working on my computer, Windows 2000 Pro.I was moving my foot under the desk and accidentally switched off the surge protector.I turned the protector back on and restarted my computer.I get a royal blue screen that says Stop Error.Inaccessible Boot Device.None of the F8 options work for restart, they all say the same thing.I really don't want to have to reformat.
I'm gettting a blue screen when i try to start my laptop with Windows XP media. It's saying the registry cannot load the hive (file): /SystemRootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable. I'm guessing I need the windows xp media reinstallation disk, but I can't seem to find it.
Recently, my computer would boot up and there would be double blue lines flickering on the screen. Sometimes, there would be a box of flashing lines that followed the cursor. Eventually, my computer would stop booting up, and I would get the blue screen with the following information: Page fault in nonpaged area Stop: 0x00000050 (0x9A4878F4, 0x00000000, 0x8052B6CC, 0x00000000)From what I have read, this could be a software or hardware problem. I downloaded Memtest and ran that many times over long periods, but it did not find errors with my RAM (or at least what it could test). Reading that it could be something in the registry that is no longer valid or corrupted, I downloaded CCleaner, ran it, and fixed the errors. Still no resolution to the problem. I have scanned for viruses and malware using Symantic Antivirus, Malwarebytes Anti-Malware, and SUPER Antispyware, but it found nothing out of the ordinary. I am not sure if my registry is corrupted or perhaps the RAM on my video card is at fault, but the laptop starts up fine in Safe Mode and works well (making me think it is not the video/graphics card). I would like to know what I could do to fix my problem short of wiping out my system and reinstalling the operating system.
i have a compaq deskpro which runs on xp pro this morning, my mother started up the computer and realised it would get past the stage of the windows xp logo when the Xp logo appears, a few seconds later, a blue screen with an error flashes and reboots but i am unable to read what the blue screen says but the pc keeps rebooting and rebooting i have accessed the recovery console from the boot cd but am i able to fix the error using this or will i have to format the pc?
After buying and installing the new hardware i'm now having some issues. Everything was fine for weeks but now sometimes i get an error message. This is the 2nd time this has happened. Everything starts up as per normal but once it comes to the Windows screens (desktop) i get a blue screen with the error message: So i pretty much need to restart the pc and it goes back to normal. All hardware and software has been checked time and time again. All seems to be ok. Bar the dvd drive. The dvd drive doesn't let me access it, however if i put a dvd, audio or data cd in then autoplay takes over and asks if i want to play it or whatever. But if i want to open it by double clicking or selecting open after right-clicking then it doesn't allow it. I get the error message: d: not accssible. Incorrect function.
My computer randomly receives this error, and this link here http://support.microsoft.com/default...b;en-us;827663 is what I think I have been receiving. It said this problem should be resolved by updating to SP2. Well I have SP2 and I still am receiving this problem. Could there be any other possible problem that could be interferring here.
I occasionally get a stop message and blue screen. It happens randomly, sometimes I am just on my desktop with no programs running. Here are some details:
STOP: 0x000000D1 (0x00000008, 0x00000002, 0x00000000, 0xF3C70140) atinyvxx.sys - Address F3C70140 base at F3C52000, Date Stamp 41f70216
