I was working on my computer, Windows 2000 Pro.I was moving my foot under the desk and accidentally switched off the surge protector.I turned the protector back on and restarted my computer.I get a royal blue screen that says Stop Error.Inaccessible Boot Device.None of the F8 options work for restart, they all say the same thing.I really don't want to have to reformat.
View 6 RepliesI have a problem J, I cant get XP to boot up. My pc blue screens mid way through the loading windows screen and then re-sets. I had a GPU hardware failure, after windows automatic installed some software a month or so ago (not sure what it installed as I wasnt using the pc at the time). My pc would not post and the mbos gave a GPU beep error message. I have just brought a new GPU and now I can get to the pc to part load. Tried using my recovery cd, but that only gets half way and then blue screens with a STOP 0x000000c2 error. I think its a driver issue but as Im unable to get into the recovery to troubleshoot further, im not sure what I can do. The only thing I can do is rig up my pc hd to my laptop as a slave, does anyone know any software that can check an OS that not being used on a hd? Is there anything else I can try? I have flashed the BIOS to the latest version.
View 2 Replies View RelatedMy laptop has started to freeze at times,then the screen would blackout then appear with a black screen with a blue box inthe middle giving BOOT DEVICE OPTIONS Hard Disk Drive, CD-ROM/DVD, Floppy Disk Drive, LAN Boot it froze blacked out and now keeps going to this option page ,where as before if you turn off then on it rectified itself.
View 7 Replies View RelatedMan, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
Four or five months ago I installed a new HD in my Dell Inpiron 700m laptop. I used Acronis True Image, as I've done previously with my Latitude. Initially, I had some trouble, because apparantly one or two drivers were missing. I found a discussion about this online and ran through the steps to fix the problem and everything seemed fine. A couple days after the installation I received the blue stop error screen for the first time. Restarted the computer and hadn't had it appear again until last week. The other night, it was coming up every five minutes, shutting down the computer.
View 24 Replies View RelatedToshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
I plugged my blackeberry into my computer - it has a new battery, though I don't know why that made a difference - and my computer crashed immediately. After the intel screen it brought me to a black screen with choice to reboot in safe mode, etc. No matter what option I chose, I was unsuccessful - just kept coming back to that screen. After troubleshooting I found my way to the blue screen with the error message stop: 0x00000024 (0x00190203, 0x8AFFA800, 0xc0000102, 0x00000000) and that I should disable virus protection etc. I inserted my xp disc but don't know how to get the system to boot from that.
View 14 Replies View RelatedI have 4 or 5 year old Win XP Home Tiny desktop computer which is having trouble booting. Basically when booting up, right before the Win XP logo it reboots itself.I have disconnected all IDE devices except for the master hard drive (plus disabled them in BIOS), I have tried a different hard drive in the machine that I know is working and has XP Pro installed. The same thing happens with this hard drive - reboots. This hard drive also has Ubuntu installed, and the machine happily boots Ubuntu to the normak desktop, but for some reason won't boot XP!Also tried a third hard drive in this machine that is working with Win 2000 installed, again the same thing happens.
Next I tried the original hard drive in a working seperate machine which produces the same result again.Also tried removing the RAM from the original machine and inserting a stick of working RAM from my other machine which again makes no difference.All hard drives I've tried have the correct jumper setting (primary master).
Also tried putting the Win XP disc in the drive and booting to that, I get to the menu and try to do a repair (R), but a few seconds after the repair begins the system reboots (this is using the original hard drive).Also tried booting into safe mode, and last known good config on all drivers.The hard drive is being detected in POST and in the BIOS which I have set as the first (and only) boot device.When I turn off the auto reboot upon fatal error, I can see the blue screen of death with error code 'Stop 0x0000007B'.So looks like the hard drive might be knackered, but there must be something else aswell because my two other working hard drives don't boot XP (only ubuntu)
When I insert any USB device into my notebook's USB ports, it produces a BSOD with description "No_More_IP_Stack_Allocations". I have updated my bios (also loaded defaults) installed latest chip set drivers. I even tried to increase the "IPStackSize" in my registry.I can't seem to find a fix for this problem.
View 1 Replies View RelatedI get this almost everyday, I even restored the laptop to how it was out of box and it keeps crashing. Here is the error.MULTIPLE_COMPLETE_REQUESTS ***STOP: 0x00000044 (0x862df368, 0x00000D60, 0x00000000,0x00000000)
View 8 Replies View RelatedI'm getting a BSOD with the following Stop Error DRIVER_IRQL_NOT_LESS_OF_EQUAL *** STOP:0x000000D1(0x00000018,0x00000002,0x00000000, 0xF72BD25F) iastor.sys - Adress F72BD25F base at F72AE000 DateStamp 42b2df42 This happens every time I start up and also I am unable to boot into Safe Mode as it is getting hung on whatever file is after Mup.sys.My plan was to go into safe mode and update iastor.sys to a newer version but I cant. I also find it stange that this file is an issue as I only have a single hard drive and I was under the impression that this file had something to do with RAID.
View 12 Replies View Related2 months ago I ordered system from Cyberpower PC and it was shipped a week later.Set it all up,formatted Windows XP Home Edition and got it running. Shortly there after, I started blue screening and it seemed RAM related, so I swapped the sticks and it seemed I would only BSOD with one of the sticks, so I called the company, shipped it back, and got a new stick.
Then I started to BSOD again with the error message of IRQL_LESS_OR_NOT_EQUAL and then 0x0000000A (0x0000F78A, 0x0000002, 0x0000001, 0x806E4A8F), and this particular error would only occur while I was playing World of Warcraft. So first I pulled the new stick of RAM and tried playing... and everything went fine for a day, and then I BSOD'd again, same error
This has happened twice.I wake up in the morning and my computer has a blue screen with a stop error message:0x0000008E.
View 6 Replies View RelatedI have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
Windows XP, when I try to boot the blue screen of death shows up and it is written Stop c00013 USER32.dll is missing
View 5 Replies View RelatedI just got a blue screen with the following information:STOP: 0x0000008E (0xC0000005, 0x805677C4, 0xEF8C7D40, 0x00000000)I'm currently running Windows File Protection...but I don't know if there is anything else I should do.
View 2 Replies View RelatedBlue screen error caused by a device or driver You received this message because a hardware device, its driver, or related software has caused a blue screen error. This type of error means the computer has shut down abruptly to protect itself from potential data corruption or loss. In this case, we were unable to detect the specific device or driver that caused the problem.
iam running windows xp....ive been having problems with my pc forever and i can never seem to work out if its bad ram or a memory issue. Anytime my pc is running for a long period of time it seems to hang and give me the blue screen, if i try to run a media program or burn a cd or anything along those lines it hangs also....What could this problem be? do i need to let someone look into my system or can it be resolved at all. Ive had every error msg i believe...it seems to always tell me its a device error when it hangs or when i reboot it gives me that msg and then reports the proble
My granddaughter downloaded some kind of game on my computer yesterday she said that while she was playing a box came up and the screen went blue well it has been blue ever since the error Disable or uninstall any anitvirus disk defragmentation or back utilities Check your hard drive configuation and check for updated drivers Run chksk/f to check for hard drive corruption and then restart your computer techincal info stop:oxooooo24(oxoo190203,0x81364008 ,oxcooo102 ,oxooooooo)
View 14 Replies View RelatedMy computer keeps giving me this error when I start it up Stop: c0000218 Unknown Hard Error Unknown Hard Error I can boot it into safe mode, but I'm unable to really do anything with it. When I try to go on the internet I get directed to a Yahoo search of whatever I entered into the address bar... and any links clicked bring me to random pages. I also noticed that the address of the link in the search isn't showing up in the status bar.
I put in My CD and it goes through the first blue screen (the one where is asks if you want to press f2 to do install drivers via A drive etc) and when it gets to "Setup is Starting up windows" (this is before all the HD formating and partitioning) I get the blue screen. it does not have much info on it all it says is:Stop: 0x0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
View 5 Replies View RelatedToshiba Laptop My buddy just came over and has his Toshiba Laptop and it is having a blue screen stop error. Wanna see if we can get some help.He has windows 2000.you turn it on and it goes through every thing and then you put your password in and get to the desk top and all that is ok, when you click to get on the internet it would flash a blue screen and then shutdown. I went into system and advanced and unchecked auto reboot so now it doesn't shut down but you get the blue screen and you can't go anywhere when it comes up.
View 2 Replies View Relatedcan an on board grafix card/video card cause random blue screen stop errors?
View 6 Replies View Relatedhaving my laptop returned from service I found my Bios messed with where when I would start my computer but Bios wouldn't find my hard drive or an OS I found that my system was set to RAID instead of ATA. After resetting it back to ATA it boots up fine. However I wanted to reformat and start clean.I placed my XP disk in, reset my BIOS to read my optical drive first and no problems.However every time I get to partition drive all I see is "Unknown Device" If I press any key I get a blue screen of death. Most times it's the 0X0000008E.
View 9 Replies View RelatedI have just installed a Samsung CLX-2160 on my Dell Dimension 5150 PC,which runs Windows XP Media Centre.As soon as the PC started reading the installation CD, it crashed with the following (taken from event viewer):The computer has rebooted from a bugcheck.The bugcheck was: 0x0000007e (0xc0000005, 0x804f106f, 0xba4fbaac, 0xba4fb7a8). A dump was saved in: C:WINDOWSMEMORY.DMP.
I rebooted with F8 and chose last working config.After a little enlightened guesswork and advice I removed my old Dell 725 printer driver(which had started giving an error message on startup). Now I could load the Samsung driver etc and the new printer works.However, XP still crashes whenever I reboot normally I can still bring up a working system with F8 as above (but I have to reload my PCI card drivers again - 2 port serial and sound card - for some reason)
I'm gettting a blue screen when i try to start my laptop with Windows XP media. It's saying the registry cannot load the hive (file): /SystemRootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable. I'm guessing I need the windows xp media reinstallation disk, but I can't seem to find it.
View 5 Replies View RelatedMy pc was running fine when it just started beeping like a warning klaxon. Rebooting didn't help, but rebooting into safe mode then normal mode did. Then 1 hour later while running spysweeper, I stopped the scan early because it was taking too long. It detected 1 adware and 1 trojan, but the log said the trojan (ruin) could not be quarantined and some threat was still in memory, despite a problem free pc except for the beeping which I thot was resolved. After exiting spysweeper
my pc locked up and could not be turned off manually, so I unplugged the cord in back. Then I got a blue screen after it tried rebooting. The bootup started normally, but then a blue screen read as follows, more or less-If this is the first time you are seeing this message reboot your pc. Otherwise check for viruses, remove any new hard drives or hard drive controllers. or refer to your startup manual. I can't even boot in safe mode.
In trying to get rid of some adware, I attempted to boot my computer (P4 2.8 GHz, 1.5 GB Ram, Windows XP SP2) in safe mode. When I selected "Safe Mode with Networking", I was brought to a blue screen called a "STOP ERROR SCREEN" - basically it said that it had to stop the booting up of the computer or the computer might be harmed. It suggested removing any recently installed hardware and disabling BIOS memory options such as caching or shadowing. So I rebooted and got into windows normally just fine.
Then I decided to try just regular Safe Mode (without networking) - when I selected that option, the computer started to do it, then rebooted and prompted me if I wanted to boot into Windows normally or safe mode, etc...I tried Safe Mode again - same thing, a reboot. I tried Safe Mode with Networking again - and I got the blue Stop Error Screen again.
This is pretty strange (at least I've never seen it) and I'd really like to be able to boot into safe mode.
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
View 10 Replies View Relatedstop device will not run in this operating system.... I get this message at the start up of my computer and will not continue to boot up until I clear it.
View 5 Replies View RelatedI'm getting pretty frequent shutdowns with the below information. When the box re-boots, the message says device driver but never can point which device driver. Can anyone have a look at this and give me some advice?
View 7 Replies View RelatedMy computer froze and I tried everything to get it working again (exit, ctrl+alt+delete, patience) , but it stayed frozen then went to a blue screen. Forgot what screen said but main part was telling me to reboot the Computer, I turned off by power button because no other way to shut it off. Then when i turned it on again, my computer was making weird noises, then went to ntdlr error after very long time. I press enter then it boots again and shows the "boot system error.
1) Can my files still be recovered and if so how?
2) How can i fix this problem?