Error - Stop Device Will Not Run In This Operating System
Dec 31, 2008stop device will not run in this operating system.... I get this message at the start up of my computer and will not continue to boot up until I clear it.
View 5 Repliesstop device will not run in this operating system.... I get this message at the start up of my computer and will not continue to boot up until I clear it.
View 5 RepliesWhen i turn on my pc i get this message.Stop c0000269 {Illegal System DLL relocation}The system DLL Kernel32.dll was relocated in memory .application not run properly relocation occurred becuase DLL c:windowssystem32GDI32.dll ocuppied address range reserved for windows system DLL's. The vendor suppling the DLL
I'm getting pretty frequent shutdowns with the below information. When the box re-boots, the message says device driver but never can point which device driver. Can anyone have a look at this and give me some advice?
View 7 Replies View RelatedI was informed today that our home computer has been freezing over the last day or so. I logged on and looked up some info on the error i was described, then perhaps fortunately, i got the vile BSOD. This is what was contained:Then it began a memory dump.It claims a device driver error, but i do not recall installing anything recently. the windows report proved less than helpful (surprise).
View 1 Replies View RelatedI was working on my computer, Windows 2000 Pro.I was moving my foot under the desk and accidentally switched off the surge protector.I turned the protector back on and restarted my computer.I get a royal blue screen that says Stop Error.Inaccessible Boot Device.None of the F8 options work for restart, they all say the same thing.I really don't want to have to reformat.
View 6 Replies View RelatedInsert any USB device to this computer, Computer keeps restarting and it wont stop doing that until I remove the usb device. I tried with all the usb ports on this computer and problem is the same. Even by hooking up a usb keyboard or mouse, computer wont get to the login screen. it keeps on restarting. It wont even go into 'safe mode'.Anyone have any clue whats going on and the solution to fix it?
View 2 Replies View Relatedi am trying to install winxp on my wifes older computer....now it is older but it does meet all of the winxp hardware requirements for installation....3 times now it has seemed like it was going to take the installation but I keep getting different stop errors....the 3 I have gotten so far are 0x00000024; 0x000000D1; 0x0000008E .....does anyone know what is going on so i can install winxp already.
View 2 Replies View RelatedMy SIL has messed this up badly. I am very good at following directions and usually figuring out computer problems, but now I can't do anything. The computer boots, shows windows XP loading and then stop. No error message. No blue screen. NOTHING. Just empty dark blackness. And I am at a loss what to do. I know they have viruses on their computer and I was trying to help them get the computer fixed. Now I dont know what to do.
View 9 Replies View RelatedOn my desktop I had partitioned the main Hard Disk into 2 and had XP Pro on one half and Windows 7 on the other.When I used to boot up the PC the windows boot menu came up asking if I wanted to boot to XP or 7.Soon afetr this XP started crashing a lot. So I decided to scrap 7 and I've re-partitioned the Hard Disk into one big lump with only XP remaining.The partition that had 7 on it no longer exists.Why does my PC still start with the windows boot menu when I start it up?It still asks me if I want to boot to windows 7 or an earlier version of windows?Is there a way of stopping this?
View 12 Replies View RelatedI'm trying to fix my friends Hp and I usually know what im doing. But here I have no idea what to do. I tried going into the bios to change the boot order to cd to format and I can't. Can anyone tell me what to do.I changed out his hard drive with mine and it does nothing. just posts and goes to a black screen instead of trying to boot and blue screening as it usually do when you change hardrives between two computers.Changed the Ide cables no luck.
View 7 Replies View RelatedI have been getting the dreaded blue screen of death with STOP: c000021a (Fatal System Error)" Error Occurs when i log into my windows 2000 service pack 3 and my linksys wireless usb network adapter connects me to the internet. My computer will remain on and run fine if i do not connect to the internet. This also will happen if i connect to the internet using my backup 56k modem
View 6 Replies View RelatedSome time ago I booted up my computer,to find that my XP switched to Windows classic style,I didn't take it seriously so I went to properties to change when I get an error message saying there is a problem with run32.dll,not only that,but the visual styles can't load I assume,becuase of run32.dll,so now I'm stuck with the piece of s*** style.
View 10 Replies View RelatedI have been getting BSOD for about 2 months now and always when i play a game especially bf2 and cod
after every BSOD it comes up device driver error but all drivers are fine,I have changed RAM,PSU and mobo after last time i was pulling my hair out and now its started doing it again after nearly 2 weeks
my system is as follows:
AMD A64 3200(winchester)skt 939
MSI neo 2 platinum NF3 ultra mobo
Giel pc 4000 ultra 2x512
Radeon X850 XT PE (agp)
I tried to do a System Recovery today on my Sony laptop. Got 41% completed and had a fatal error. Options given were Ignore, Retry or Abort. Attempted a Retry. Got a fatal error message and everything locked up. I ended up shutting down and when I turned the computer on again it said no operating system found. Where did I screw up?
This is a six year old Sony, XP, AMD 1.0Ghz. Everything was working at the time I tried the System Recovery EXCEPT I was constantly getting low space messages for drive C. I have no files on this drive and very little software. It is a 20G hard drive partioned into two 10G partitions.
I am getting the blue screen of death with 7E error code. It gives me the standard message at top.This is the ONLY information listed where it says TECHNICAL INFORMATION:STOP: 0x0000007E (0xC0000005, 0x8A98AAB3, 0xBA513B98, 0xBA513894)I've tried system restore with no success. I have added no hardware or software recently. This started unexpectantly yesterday. The night before I went to a website and it was not a trusted website and I "x'd" out of it. The next day it does this.
View 7 Replies View Related have a gateway MX6453 notebook.
I was having problems with it constantly rebooting it self. finally got it to boot in safe mode, couldn't really find or fix anything. tried to restart in normal mode, and did the restarting as soon as windows started to load.
Thought I would try system revovery at the boot menu. It started up and started to run and kept giving error msgs about not being able to read or open files. (all files are on recovery partition). Well it frooze up about half way. Tried to run it again, and it starts to load and then BSOD.
here is what i get
STOP: c000021a {Fatal System Error}
The session Manager Initialization system process terminated unexpectedly with a
status of 0x000026c (0x00000000 0x00000000)
The system has been shut down.
I want to know if this is something I maybe able to repair, or if i should send it back to gateway?
My first guess is a bad hard disk,
Received this message, Error Loading Operating System, when installing Windows xp pro? After loading the installation files from the CD, windows xp shuts down and reboots to continue loading a fresh install of Windows from the installation files onto the HD.Instead of loading the installation files an error message hangs the installation and reads Error Loading Operating System.The installation files are loaded, but Windows xp won't load up? Looked around the forums and searchs and no one had a definitive answer to solving this issue of Error Loading Operating System.
View 1 Replies View RelatedI just reinstalled XP home on a Personal Computer but now I get an error 711.Windows help directs me to Remote Access connection manager. When I try to start this I get error5.
View 4 Replies View RelatedI have built a computer and when i go to install windows it gives me this error message it says Error:SXS.DLL:syntax error in mainifest or policy file D:I386asms6000MSFTWINDOWSCOMMON|CONTROLS.MAN on line
View 9 Replies View RelatedI got back from class today and my computer was frozen. I forced a reboot. When it tries to load windows XP, I get an error message that says: Operating System Not Found Can/Should I load with the boot disks? I CAN NOT loose the info on my hard drive.
View 4 Replies View RelatedMy friends son has a presario 900, i hate this thing by the way, it keeps crashing on him. this time its comming up as error loading operating system. using google is how I found your site. but anyway the compaq screen comes up, then the error loading operating system comes up and I cant get it to do anything else. it also won't let me format to start over.
View 5 Replies View RelatedDoes anyone know how to correct the following error appears at startup; The procedure entry point set keyboard filter hook could not be located in the dynamic link library?
View 8 Replies View RelatedWindows XP and every time I log on to my desktop, the first thing that pops up is an error box. This is what it says: RUNDLL Error loading C:PROGRA~1NEWDOT~1NEWDOT ~1.DLL. The specified module could not be found.OK.
View 17 Replies View RelatedI got this error.I am not able to reinstall windows XP even.
View 12 Replies View Relatedhi, i just bought a new pc.. it had vista on it so formatted fully. i booted xp from cd and installed. after the blue screen installation my pc rebooted as normal. when it loaded up a message says: problem with operating system
View 6 Replies View Relatedmy laptop stopped working. After dwld some Excel service pack the pc refused to restart. The message is quite ominous: Stop error c0000218 and the hive affected is system root/system32/config/default It's impossible to recover the last working config or start in safe mode or do anything. It keeps looping back to the blue screen with the stop error. The pc does not recognize the hard drive, it does not have a recovery cd.
Tried to repair my xp pro but just wouldn't fix so had to do a re-over. all is well cept i have continuous run-tine errors on different pages. here is an error i got today :Error A Runtime Error has occurred.Do you wish to Debug? Line: 0 Error: Object expected,Yes/No.
View 12 Replies View RelatedXP reinstall won't validate so that I can get updates. It is a legal copy and I had no problem activating windows. However when I tried to validate it for updates it keeps telling me there is an unknown error and validation could not be completed.
View 4 Replies View RelatedI have upgraded to XP-Pro from 98se and a little estimating program I have used for years worked ok for a couple of weeks until today.I get this message when ever I try to open the program or reinstall the program.C:WINDOWSSYSTEM32AUTOEXEC.NT.The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.
View 14 Replies View RelatedError message : stop 0xC2 or stop 0x000000C2 ,Error message says pool header has been corrupted.
View 7 Replies View RelatedIs there anyway without stopping all other automatic updates?
View 1 Replies View Related