I'm trying to fix my friends Hp and I usually know what im doing. But here I have no idea what to do. I tried going into the bios to change the boot order to cd to format and I can't. Can anyone tell me what to do.I changed out his hard drive with mine and it does nothing. just posts and goes to a black screen instead of trying to boot and blue screening as it usually do when you change hardrives between two computers.Changed the Ide cables no luck.
Received this message, Error Loading Operating System, when installing Windows xp pro? After loading the installation files from the CD, windows xp shuts down and reboots to continue loading a fresh install of Windows from the installation files onto the HD.Instead of loading the installation files an error message hangs the installation and reads Error Loading Operating System.The installation files are loaded, but Windows xp won't load up? Looked around the forums and searchs and no one had a definitive answer to solving this issue of Error Loading Operating System.
My friends son has a presario 900, i hate this thing by the way, it keeps crashing on him. this time its comming up as error loading operating system. using google is how I found your site. but anyway the compaq screen comes up, then the error loading operating system comes up and I cant get it to do anything else. it also won't let me format to start over.
My computer tries to boot, it takes a while to detect anything from the CD-ROM (my first boot priority), and then when it detects the IDE, it says "error loading operating system" and after that I can't do anything but restart or shut down. I am running Windows XP Professional and it will load with a boot disk, but if I take out the boot disk it won't load.
When doing an XP windows re-install. I am getting the error "Error loading operating system" I was formating the drive with XP and it stopped. Now when rebooting to go to CD for install I get the Error.
I have 2 computers (well more than that but for this i have 2) One works and one doesn't. I took the hard drive out of the working one and put it in the non working one as the master. (BTW on the non working one its just the hard drive that is working properly) I put the hard drive from the non working one as the slave so i can try and get some files off of it and format it. So I boot up the system and the computer recognizes it but then i get an " Error Loading Operating System" error.
I got this problem that my computer just stops when loading WindowsXP I got the Computer today and i installed WindowsXP but when i try to start up the computer just it freezes while loading. I tried to re-instal it but still it again freezes.
My SIL has messed this up badly. I am very good at following directions and usually figuring out computer problems, but now I can't do anything. The computer boots, shows windows XP loading and then stop. No error message. No blue screen. NOTHING. Just empty dark blackness. And I am at a loss what to do. I know they have viruses on their computer and I was trying to help them get the computer fixed. Now I dont know what to do.
I just reinstalled XP home on a Personal Computer but now I get an error 711.Windows help directs me to Remote Access connection manager. When I try to start this I get error5.
I have built a computer and when i go to install windows it gives me this error message it says Error:SXS.DLL:syntax error in mainifest or policy file D:I386asms6000MSFTWINDOWSCOMMON|CONTROLS.MAN on line
I got back from class today and my computer was frozen. I forced a reboot. When it tries to load windows XP, I get an error message that says: Operating System Not Found Can/Should I load with the boot disks? I CAN NOT loose the info on my hard drive.
Does anyone know how to correct the following error appears at startup; The procedure entry point set keyboard filter hook could not be located in the dynamic link library?
stop device will not run in this operating system.... I get this message at the start up of my computer and will not continue to boot up until I clear it.
Windows XP and every time I log on to my desktop, the first thing that pops up is an error box. This is what it says: RUNDLL Error loading C:PROGRA~1NEWDOT~1NEWDOT ~1.DLL. The specified module could not be found.OK.
hi, i just bought a new pc.. it had vista on it so formatted fully. i booted xp from cd and installed. after the blue screen installation my pc rebooted as normal. when it loaded up a message says: problem with operating system
Some time ago I booted up my computer,to find that my XP switched to Windows classic style,I didn't take it seriously so I went to properties to change when I get an error message saying there is a problem with run32.dll,not only that,but the visual styles can't load I assume,becuase of run32.dll,so now I'm stuck with the piece of s*** style.
I tried to do a System Recovery today on my Sony laptop. Got 41% completed and had a fatal error. Options given were Ignore, Retry or Abort. Attempted a Retry. Got a fatal error message and everything locked up. I ended up shutting down and when I turned the computer on again it said no operating system found. Where did I screw up?
This is a six year old Sony, XP, AMD 1.0Ghz. Everything was working at the time I tried the System Recovery EXCEPT I was constantly getting low space messages for drive C. I have no files on this drive and very little software. It is a 20G hard drive partioned into two 10G partitions.
Tried to repair my xp pro but just wouldn't fix so had to do a re-over. all is well cept i have continuous run-tine errors on different pages. here is an error i got today :Error A Runtime Error has occurred.Do you wish to Debug? Line: 0 Error: Object expected,Yes/No.
XP reinstall won't validate so that I can get updates. It is a legal copy and I had no problem activating windows. However when I tried to validate it for updates it keeps telling me there is an unknown error and validation could not be completed.
I have upgraded to XP-Pro from 98se and a little estimating program I have used for years worked ok for a couple of weeks until today.I get this message when ever I try to open the program or reinstall the program.C:WINDOWSSYSTEM32AUTOEXEC.NT.The system file is not suitable for running MS-DOS and Microsoft Windows applications. Choose 'Close' to terminate the application.
When i turn on my pc i get this message.Stop c0000269 {Illegal System DLL relocation}The system DLL Kernel32.dll was relocated in memory .application not run properly relocation occurred becuase DLL c:windowssystem32GDI32.dll ocuppied address range reserved for windows system DLL's. The vendor suppling the DLL
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
I"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done: 1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%) 2)Removing all connected Componets and rebooted, same problem. 3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
I have recently purchased some computer components and wish to build a set. My processor is an AMD Athlon 64 3500+ processor. Does this mean that only a 64 bit windows operating system will work with this machine or can I install windows XP pro 32 bit system on it ?
The computer is now runnign windows ME but it's not working well, the computer is very slow and kraches from time to time. I've reintsalled the operating system
I am thinking of buying a pc on ebay that has no operating system,My pc already has winxp home and i am curious if i can just transfer it to the new pc? without any problems, My pc was a bundle from walmart so i don't have the winxp cd's.
