I have been getting the dreaded blue screen of death with STOP: c000021a (Fatal System Error)" Error Occurs when i log into my windows 2000 service pack 3 and my linksys wireless usb network adapter connects me to the internet. My computer will remain on and run fine if i do not connect to the internet. This also will happen if i connect to the internet using my backup 56k modem
View 6 Replies have a gateway MX6453 notebook.
I was having problems with it constantly rebooting it self. finally got it to boot in safe mode, couldn't really find or fix anything. tried to restart in normal mode, and did the restarting as soon as windows started to load.
Thought I would try system revovery at the boot menu. It started up and started to run and kept giving error msgs about not being able to read or open files. (all files are on recovery partition). Well it frooze up about half way. Tried to run it again, and it starts to load and then BSOD.
here is what i get
STOP: c000021a {Fatal System Error}
The session Manager Initialization system process terminated unexpectedly with a
status of 0x000026c (0x00000000 0x00000000)
The system has been shut down.
I want to know if this is something I maybe able to repair, or if i should send it back to gateway?
My first guess is a bad hard disk,
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
Well I have never had 1 single problem with my computer until now. I decided to check for windows updates since I haven't done so in awhile. When I did, windows prompted me to install SP3 for XP. Everything ran smooth upon installation, so I restarted the computer as it suggested. Now, windows will not boot and it blue screens to "windows fatal error".
View 4 Replies View RelatedWhen I try to install updates from Microsoft's site I get an error saying "Updates were not successfully installed." This happens during both manual and automatic updating. I search google.com high and low and cannot find a fix that works. This is the specific error from the WindowsUpdate.log
FATAL: Error: 0x80070005. wuauclt handler: failed to spawn COM server
FATAL: 0x80070005: ERROR: Remote update handler container process created (PID: 1656), but exited before signaling event
I tried to do a System Recovery today on my Sony laptop. Got 41% completed and had a fatal error. Options given were Ignore, Retry or Abort. Attempted a Retry. Got a fatal error message and everything locked up. I ended up shutting down and when I turned the computer on again it said no operating system found. Where did I screw up?
This is a six year old Sony, XP, AMD 1.0Ghz. Everything was working at the time I tried the System Recovery EXCEPT I was constantly getting low space messages for drive C. I have no files on this drive and very little software. It is a 20G hard drive partioned into two 10G partitions.
STOP 0x00000050 (0x8CCC1345, 0x0000001, 0x808A65A1, 0x00000000) These both happen when installing windows, either when at 95% of copying files or when booting into windows.
View 7 Replies View RelatedThese symptons and problem have started within the past week, without warning: My laptop is now particularly slow, the mouse lags, as does the internet - especially videos and music starts. Also, there is a "service.exe" application error that occurs a split second before the computer turns off, so on the "windows is shutting down" screen. Consequently I'm an unable to read the error code. I presume the services.exe error and the slowing down are related.
View 5 Replies View RelatedIt has Broadcom PXE something, and every time I try to boot from CD ROM for my windows XP install it goes there and says "Media test failure" "Check cable" Then it goes to the windows loading screen, and it blue screens and says "Fatal System error" Blah blah, windows is shutting down.I'm trying to reinstall windows, but it isn't working, NOTHING will load when I put it in my CD drive.No Safe mode doesn't work, nothing on the black and white screen from pressing F8 works, at all.
View 1 Replies View RelatedOn my Windows Media Player and error occurs after about 2-3 minutes of play that says this program cannot continue. i have no idea why this is happening.
View 4 Replies View RelatedI have been getting alot of popups for Winfixer. I suspect other viruses have attached this PC. I ran ADAWARE, SPYBOT and AVG. I got rid of some but the Winfixer is persistant. I cannot come up in safe mode because the system hangs.
View 14 Replies View Relatedi am trying to format hp a1268c windows xp when i do i get this error stop c00021a fatal error status 0x0000034 How do i fix this so i can format my computer?
View 12 Replies View Relatedthis is not a BSOD because the message is only my backgroud, my computer functions fine despite it. I ran a whole slew of antivirus stuff and killed off a bunch of nasty buggers, but the message didn't go away.I went to Display Properties and there were only two tabs, Screen Savers, and Settings. It was missing the Appearance, Themes, and Desktop tabs. So I went on here and found something about changing the registry files from 1 to 0 in a couple places. Well I got the tabs back, but I still cannot change my desktop background. It's all greyed out. My computer is functioning fine now and is armed to the teeth against new stuff, but it still has that annoying BSOD look-a-like.
View 6 Replies View RelatedOn trying to install windows, all the file copying went well. Restarted my computer, and windows ran finishing up the second half of the installation.Then, I get an error that states the following:Fatal Error:One of the components that Windows needs to continue setup could not be installed. Installation Failed: D:ROOTXPHO1386asms. Error message: Data error (cyclic redundancy check).If it is just a CD error, is there any way to download a Windows XP Home OEM and burn it to a disc and run it from CD-ROM? Or can I try copying the CD and see if it fixes the error? Or are there any other solutions that I am not seeing?
View 3 Replies View RelatedI am having a major problem trying to install some s/w (Sansa MediaConverter) on my P4, Win XP SP2 PC. Just as the s/w begins to install I get a fatal error - (something like) "Unable to create a file that already exists ... C:Progam FilesCommon FilesInstallshieldengine6Intel 32iuser.dll" Since I was able to install the s/w on a friend's similar PC I think the problem is a compatability or bug with XP and/or the Installshield appln on my machine.
I followed some suggestions (from the Installshield support site) and cleaned up my temp file, deleted the 'Engine 6' folder and reinstalled the Installshield 'ikernal.exe' but this hasn't helped. Surprisingly when I tried to reinstall the 'ikernal' it also runs into exactly the same error! - so there is some issue with how the Installshield (Engine 6) is working on my PC.
I'm trying to fix my parents computer. They attempted to install a new printer and accompanying photo manager. After installing printer, it does not work. They decided to unistall photomanger and it starts uninstall them says fatal error. I got a win 16 subsystem error when trying to reinst printer software. I downloaded the printer driver. When istalling it prepares the install wizard and copies the needed files, then it stops installation and closes, no error message.
View 4 Replies View RelatedI got the following message upon booting my pc.STOP: c000021a {Fatal System Error}Te Session Manager Initialization system process terminated unexpectedly with a status of 0xc0000022 (0x000000000 0x00000000).The System has been shut down.The day before I did a windows update.I can not boot into windows.. Not even Safe Mode or dos prompt.
View 13 Replies View RelatedA dell 8600 laptop i had xp on it it was running slow for the last few days & i tried to reinstall it the system crashed during set up and i had to restart it and when it restarted it said set up is restarting and then it showed fatal error one of the components that windows needs to continue could not be installed manifest phrase error invalid at the top level of the document press ok to view log file and when i do thatthe log file appears and when i close it it restarts the comp and aganin goes through the same fatal error i have tried the safe mood and it says setup can't run in safe mood i have tried the last good config it won't run.
View 7 Replies View RelatedNorton ghost was on this personal computer when bought and now expired.When I go into add remove program to remove it ,it won't remove and say fatal error during installation.This program is 85.75 mb and want to remove it.
View 6 Replies View RelatedMan, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
stop device will not run in this operating system.... I get this message at the start up of my computer and will not continue to boot up until I clear it.
View 5 Replies View Relatedlaptop was infected with the Antivirus 2009 after surfing the web and I removed it using malwarebytes program. Then shortly after the laptop would show a blue screen, displaying "KERNEL STACK INPAGE ERROR" and then reboot. After the reboot, my laptop seemed to run fine, I downloaded AVG antivirus software to check if there was a boot sector virus (?) and after running the laptop for about 30 minutes, it showed the blue screen again and reboots. This kept on occuring.
Then I tried to reformat the laptop. The first time I tried to format it as FAT32, it got to about 60% before rebooting. The second time I managed to get past the formatting (FAT32 [quick])and I got onto the part of installing windows. About 20 minutes into the installation. A stop error appeared "STOP C0000218 Unknown Hard Error". Could the hard disk be corrupt
the blue screen blocks out everything! there is also a grey box that says "runtime error" at programC:windowsexplorer.exe. I shut down the computer twice and on the second time, when it came on it said "rage 128 v."
View 1 Replies View RelatedI want to install trend micro antivirus, but every time i try to install it it says norton 2003 is interupting it. Then i try to uninstall norton 03 and it says "Fatal Eror".
View 4 Replies View RelatedWhen I turn my computer on it shows me the normal Windows XP loading icon and then that goes away and I can watch the CPU light go haywire right as the blue screen (of death) says that there has been a fatal error (0x0000135) and the system has shut down. I have no clue what to do... the only way to bypass this (if you want to call it that) is to hit F2 and go to setup mode. I don't know what to do there. I've had problems before where the computer will only go to one or another BSOD and I've had to completely clear the hard drive and reload everything on it aka start from scratch. Usually my dad does this but first I would like to see if there is any other way to fix it.
View 1 Replies View RelatedAfter formatting my computer im now in the stage of installing all the bits and bobs back on again. nothing will install and leaves me with the error message: "Error: -1603 Fatal error during installation. Consult Windows Installer Help (Msi.chm) or MSDN for more information" I couldnt find anything about why this is happening but i found a way how to solve it. to solve it it said: "Well problem finally solved. All you have to do is add a group called "Users" in the groups and users settings of the administrative settings and it will install..." I am using "Windows XP Home Edition" and "Service Pack 1" and i have not found anywere that allows me to do this.
View 6 Replies View RelatedI am getting the blue screen of death with 7E error code. It gives me the standard message at top.This is the ONLY information listed where it says TECHNICAL INFORMATION:STOP: 0x0000007E (0xC0000005, 0x8A98AAB3, 0xBA513B98, 0xBA513894)I've tried system restore with no success. I have added no hardware or software recently. This started unexpectantly yesterday. The night before I went to a website and it was not a trusted website and I "x'd" out of it. The next day it does this.
View 7 Replies View RelatedWhen I try to open MS Word I get "Fatal Execution Engine Error (0x7927baca)" When I click "OK" I get a
"WINWORD.EXE Common Language Runtime Debbuging Services" window that reads "Process id=0xd20 (3360), Thread id=0x7c (124) It affects other programs as well.
When i turn on my pc i get this message.Stop c0000269 {Illegal System DLL relocation}The system DLL Kernel32.dll was relocated in memory .application not run properly relocation occurred becuase DLL c:windowssystem32GDI32.dll ocuppied address range reserved for windows system DLL's. The vendor suppling the DLL
i have a dell 6000, when i turn it on the xp starting sequence begins nad suddenly it shuts off with a message of fatal error and a lot of zeroes followed by a 5, what could be the problem
View 2 Replies View Relatedmy laptop stopped working. After dwld some Excel service pack the pc refused to restart. The message is quite ominous: Stop error c0000218 and the hive affected is system root/system32/config/default It's impossible to recover the last working config or start in safe mode or do anything. It keeps looping back to the blue screen with the stop error. The pc does not recognize the hard drive, it does not have a recovery cd.