I cannot bootup the computer. It gives me the following error STOP:- c0000218 Registry file failure. The registry cannot load the hive (file) or systemrootsystem32configsecurity or the log or alternate. It is corrupt, absent, or not writeable. Cannot boot to safemode, also tried last known good configuration without success. I have also tried the microsoft KB 307545 fix but could not copy or delete the security file.
When booting up my PC, I am receiving the following error message 'STOP: c0000218 {Registry File Failure} The registry cannot load the hive (file): SystemRootSystem32ConfigSOFTWARE or its lor or alternative. It is corrupt, absent or not writable'. I understand that the OS needs to be recovered from the XP bootup disk but the OS was pre-installed so I do not have a copy of this.
When I try to boot up Windows XP, when its at the windows loading screen with the Windows logo, the bar under it the blue thing will move for about 6 or 7 times and then just freeze and stop. Then I restart the computer and choose to boot in safe mode which is the only mode that works.This is the second time this has happened,the first time it happened through safe mode I got the Windows Xp.iso image from microsoft.com, and then used a product key locator to find it on my pc because I do not have the windows xp boot discs but my original copy of XP is legit.
When I start PC, it automatically takes me to the startup options part to reboot in safe mode, safe mode w/ networking, safemode w/ prompt, last known good config, & normal startup. Getting Stop c0000218 {Registry File Failure} The registry cannot load the hive (file) SystemRootSystem32Config
View 11 Replies View RelatedI've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
View 2 Replies View RelatedI'm having a crisis, my computer crashed...it would not boot up, I get the "Windows did not start successfully" and asked to choose to start windows. If I choose start normally, it just restarts and back to the same screen, none of the safe modes work, the drivers load, black screen, and it just stays like that.
My computer was fine a few days back, then one day I get a blue screen with writing about some error, then something about a win2k.sys and now poof! Can it be saved? I'm a student and all of my work is on that harddrive. I will appreciate the help/advice anyone has to offer.
I am in a desktop administration class and I have been given a question I can't seem to find an answer for.PC appears to be booting in Safe Mode, however it is not. What is the likely problem?
View 5 Replies View RelatedDon't know what found it's way into my PC last night but I was suddenly hit with the BSOD showing the following error:
Technical information:
*** STOP: 0x0000007E (0xc0000005, 0x87AB43B2, 0xF79AD270, 0xF79ACF6C)
Normal reboot results in the same screen and trying to boot up into sfae mode just returns me to the setup (F8) screen. So, I figured on a repair for which I've managed to get hold of an XP disc from my mother of all people.
So far I have, based on what I have found from searching the net, via the Recovery Console on the disc I have:
run chkdsk /r
followed by a reboot - no change
COPY D:i386NTLDR C:
COPY D:i386NTDETECT.COM C:
FIXBOOT
followed by a reboot - no change
FIXMBR (yes to proceed)
followed by a reboot -- no change
bootcfg /rebuild
WINDOWS XP PROFESSIONAL
/Fastdetect
Those procedures sounded pretty safe to me and I don't think I've damaged my PC any further but ...
I have a strange problem which I can't seem to rectify, I've searched around but can't find a solution. I have a Dell Demension 8400, it has 1GB RAM installed, an 80GB C: drive and I have a 250GB external USB drive (which I use for back-up, I store pictures music etc there) and I'm running Windows XP PRO with SP3+ all fixes installed.
he problem is I can NOT boot info safe mode. (I can boot normally though no problem). When I tap F8 key, I get the safe mode choices just fine (just safe mode or safe mode with networking etc) when I make a choice it starts to load then I get a BSOD with the following message/information
A problem has been detected and windows has been shutdown to prevent damage to the computer. If this is the first time you've seen this stop error screen (it's NOT it happens every safe mode boot no matter if I choose just safe mode or save mode with networking etc.)restart your computer. If this screen appears again, follow these steps:
Check for Viruses on your computer (I do always have Avira's AntiVir running and fully updated, I ran Malwarebytes, Superantispyware, and spybot search & destroy). Remove any newly installed hard drives or hard drive controllers (no new hard drives or controllers). Check your hard drive to make sure it is configured and terminated (I assume it's working I can boot into windows fine normally just NOT in safe mode). Run CHKDSK /F (I did that no problems detected) to check for hard drive corruption and then restart your computer. (the problem of course still exists)
Technical information:
***Stop: 0x0000007B (0xF7C7B524, 0xC0000034, 0x00000000, 0x00000000)"
I'm not 100% sure what to do, I really don't want to format & reinstall Windows from scratch because I have so many "things" which I use alot that I'd not want to try to replace.
Using safe mode isn't 100% essential, but there have been times in the past I needed it to remove a malware that could not be removed in normal mode.
My laptop runs Win XP Pro SP3. Since yesterday, the normal boot does not succeed - but safe mode (with and without networking) are working. I know I am supposed to diagnose the cause in the safe mode, but do not have a clue what the next step ought to be
View 14 Replies View RelatedBasically the original problem was a non functioning WinXP OS that led to using the system restore disc on a Toshiba Satellite laptop. http://forums.techguy.org/windows-nt...dont-work.html
Now the system will only boot in safe mode. So far I've done the restore several times. Gone into msconfig, checked Hide Microsoft services and disabled the rest, unchecked load startup items and tried a Diagnostic Startup. Device Manager looks fine, but I tried disabling items without change. It looks like the Restore Disc is the right one for the system.
i was trying to get into safemode so i could run an antivirus scan, problem is whenever i tried going in safemode the blue screen would pop up and computer would restart. now for some dumb reason i thought maybe i could get in safemode if i used msconfig and selected safe mode from the boot menu. so the computer restarted and now it boots in safemode but the blue screen and restart happen everytime now. ive tried "start windows normally" but that boots in safemode. ive tried "last known good config" and that too boots in safemode. so now im stuck
View 9 Replies View RelatedI tried booting into "Safe Mode" to defrag my computer. Before it goes into "Safe Mode" I get a blue screen stating that "I must remove improperly installed software to proceed". I have not installed any software. I have replaced my cd-rom burner and it is working properly. Any ideas on how a I may access "Safe Mode"??
I am running 2000 pro. Also is there a way I can see what the "Administrative Password" on Win 2000 pro.?
I set up a friends computer with 2000 and I didn't enter a password. Apparently, someone else has entered one but can not remember it, thus their computer is useless without the password.
My computer won't stop booting in safe mode and I can't change it. I have no idea where to start.
View 8 Replies View RelatedBlue Screen Reads: BAD_SYSTEM_CONFIG_INFO. STOP: 0x00000074. Can't boot into safe mode, computer simply reboots instantly and you can see the blue screen for a split second when you select that option or any other option. The only way to see the blue screen is to let the timer time out on the selection of windows did not start properly.Do not have the choice of repair either.
View 14 Replies View RelatedA couple of programs have stopped working on my PC i.e they don't launch when I select them from the START menu.Help & Support does not launch at all - I have searched the web and tried numerous fixes none of which work.Paint Shop Pro 9 does not launch at all but an entry does appear in the Task Manager list of processes.Nothing adverse is listed in Event Viewer and I have tried rebooting into XP Pro with minimal services started.For what it's worth both programs do work in Safe Mode.
View 6 Replies View RelatedMy cousin's XP was infected by virus, and it was not able to start in any mode(including safe mode, command prompt,last configuration and etc). I took and move the harddisk to my PC and scaned it using trend micro
housceall. The virus scanner detected and removed several virus. But it is still not able to get into any mode. Once i get into the xp, the XP reboots and it happens to any mode. I also did the repair installation and scandisk, and it did not work.
In device manage it has exclamation by it i uninstalled but if i do add hardware its located w/ exclamation by itif i uninstall an restart its back with exclamation dont work in safe mode works be4 boot when i type in password its disabled on boot.
View 1 Replies View RelatedMy computer is in really bad shape. I have XP version 2002 service pack2.My internet connexion only working in safe mode with networking My anti-virus doesn't work anymore and the others I tried to install either. I've already run in safemode Super Anti-spyware and Bitdeffender, they quarantine and delete a lot of.
View 12 Replies View RelatedI have a standard PS/2 keyboard and mouse which do not work as I try to enter Safe mode. As I am on Windows 2000 Pro, I need to log on as administrator. I am not password protected, but have no way of clicking the Log in button.There are no settings for Keyboard or Mouse in my BIOS setup
View 2 Replies View RelatedI am trying to get my computer to boot but having problems. It gets to the title page of windows xp and stays there...I wanted to do a system restore but when I go onto log on page my mouse isn't working either.....what should I do?
View 3 Replies View Relatedi did a previous thread of my computer being slow, ignore that one... i got a much serious problem. Someone told me to go into safemode so i just tried to reboot in safe mode. It wouldn't reboot all i saw was a black screen with a mouse cursor so i press the reset button, but this computer is not stable i always haev to press the reset button. Now when i try to restart it jsut reboots again and again. It brings me this blue screen saying STOP:c0000218 {registry file failure} the hive file or sumthing like that and systemrootsystem32configdefault and then it restarts. When i try to go to safe mode i see all these .sys files loading or sumthing and then it gets stuck after like the 20th one. Im on windows 2000, i installed 2000 in cases like these. i found help on a different site. It told me to go to recovery mode, i instert my XP CD and boot it from taht but that doesn't work for sum reason. SO i got my XP boot disks and it works!! BUTTT i go to recovery mode and it restarts and nothing happens! just a plain restart! what can i do!!!
View 12 Replies View RelatedI cannot boot my XP machine. In safe mode it also says safe mode in white text in each corner and shows windows build details at the top. I have trying going back to previous good config - same problem. A normal boot just leads to a black screen with a movable mouse arrow - no sign of a login screen. I have tried a recovery reinstall from a an XP pro CD from another computer - this took about 40 minutes and went through all the steps normally (with normal graphics displayed duting the reinstall) but after finishing the same problem is still there.
Only now the windows build info in sfae mode reports SP1 (originally didi not as the computer was supplied with XP before SP1) I am at a loss to know what to do to get the machine wordking without a refomat of the hard disk, whcih will destroy all my data, and my partners stuff too - mostly not backed up, as usual.
I went into bios and disabled the search for the A: drive , because i couldn't care less. then it brought me to the screen to choose to open in safe mode, normally, or from the last point where windows worked well. problem : i can not use my keyboard in this setting, it works in bios, but i cant choose to load from the last working point of the OS.
View 4 Replies View RelatedWhen I'm trying to start up Windows XP Home Edition I receive an error box without an error message, I can just click YES or NO. Neither option let's me continue. When starting up in Safe Mode, everything works fine.
View 2 Replies View RelatedI've been trying to install Windows XP service pack 2 and I'm having no luck at all.I consistently have this message pop up everytime I try to install: Service Pack 2 Setup Error Service Pack 2 Setup could not backup registry key HKLMSoftwareMicrosoftWindowsCurrentVersionUninstallQ282010 to file C:WINDOWS$Nt ServicePackUninstall$ eg01617. 5: Access is denied.
View 5 Replies View RelatedIn trying to get rid of some adware, I attempted to boot my computer (P4 2.8 GHz, 1.5 GB Ram, Windows XP SP2) in safe mode. When I selected "Safe Mode with Networking", I was brought to a blue screen called a "STOP ERROR SCREEN" - basically it said that it had to stop the booting up of the computer or the computer might be harmed. It suggested removing any recently installed hardware and disabling BIOS memory options such as caching or shadowing. So I rebooted and got into windows normally just fine.
Then I decided to try just regular Safe Mode (without networking) - when I selected that option, the computer started to do it, then rebooted and prompted me if I wanted to boot into Windows normally or safe mode, etc...I tried Safe Mode again - same thing, a reboot. I tried Safe Mode with Networking again - and I got the blue Stop Error Screen again.
This is pretty strange (at least I've never seen it) and I'd really like to be able to boot into safe mode.
The problem is on my buddies pc. It uses Windows XP Professional. I have it setup next to this pc I'm currently using. First I get this screen:
We apologize for the inconvenience, but Windows did not start successfully. A recent harware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight your choice.
Any choice I highlight brings this screen:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is indentified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with the hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000007E (0x80000003, 0xF8470005, 0xF894C4B4, 0xF894C1B0)
*** SCSIPORT.SYS - Address F8470005 base at F8460000, DateStamp 41107b4b
An app was installed, and right after, a BSOD came up with the following error message: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Technical information: *** STOP: 0x0000008E (0xC0000005, 0xBF803EF6, 0xF70917c4, 0x00000000) *** win32ksys - Address BF 803EF6 base at BF800000, DateStamp 43446a58 Beginning dump of physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance......
I'm having a problem starting my computer running windows XP home edition. Upon startup, I get the blue screen stating... "stop: c0000135 {unable to locate component} This application has failed to start because RPCRT4.dll was not found. Re-installing the
application may fix this problem."Also, I am unable to boot in safe mode (same RPCRT4.dll error).i have tried repairing with original xp disk when using chkdsk /p it finds one or more errors on disk but does not solve the problem.
I'l running xp pro - sp2 I'm having a problem deleting the below folder because the "epilogue.ps" file is being used and I get a access denied error.Adobe 6.0 has been uninstalled. C:Documents and SettingsAll UsersDocumentsAdobe PDF 6.0Dataepilogue.ps I tried running in safe mode to delete but it is already running and can't be deleted. I've have a log of items running below
View 7 Replies View Related