I am in a desktop administration class and I have been given a question I can't seem to find an answer for.PC appears to be booting in Safe Mode, however it is not. What is the likely problem?
View 5 RepliesI've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
View 2 Replies View RelatedMy dad has a Sony Vaio labtop that he bought from his friend at work with the operating system and all the software already installed. It has a single account named Owner that he clicks on which usually allows him to log-on, he never had a password. He clicks the icon, it appears to start logging on then suddendly it will say logging off, saving settings, then returns us back to the main log-on screen.I tried to start in safe mode by pressing F8 while the computer is intially turning on, but all the labtop does is make this loud beeping noise and starts up normally. No screen appears for me to select safe mode or anything.
View 8 Replies View RelatedI'm having a crisis, my computer crashed...it would not boot up, I get the "Windows did not start successfully" and asked to choose to start windows. If I choose start normally, it just restarts and back to the same screen, none of the safe modes work, the drivers load, black screen, and it just stays like that.
My computer was fine a few days back, then one day I get a blue screen with writing about some error, then something about a win2k.sys and now poof! Can it be saved? I'm a student and all of my work is on that harddrive. I will appreciate the help/advice anyone has to offer.
I'm running Windows XP - Media Center Edition on Intel Pentium 4 CPU 3.2GHz, 1.5G RAM.This morning, Norton 360 detected and blocked several intrusion attempts, but stated that everything was secure.Shortly thereafter, every program that attempted to open would generate the following pop-up message, "[program name] UNABLE TO LOCATE COMPONENT - The application has failed to start because msefrms.dll was not found. Re-installing the application may fix this problem."I click OK to acknowledge this message, only to have it reappear. After several "OK clicks", however, the program usually opens and functions properly.
I restarted my PC to get into safe mode to run a virus scan, but the message appears even before Windows begins (even on winlogon, services, lsass, etc.). Again, a few clicks of OK gets me past the message and into Windows.I haven't been able to find ANY reference to msefrms.dll on the web.
Don't know what found it's way into my PC last night but I was suddenly hit with the BSOD showing the following error:
Technical information:
*** STOP: 0x0000007E (0xc0000005, 0x87AB43B2, 0xF79AD270, 0xF79ACF6C)
Normal reboot results in the same screen and trying to boot up into sfae mode just returns me to the setup (F8) screen. So, I figured on a repair for which I've managed to get hold of an XP disc from my mother of all people.
So far I have, based on what I have found from searching the net, via the Recovery Console on the disc I have:
run chkdsk /r
followed by a reboot - no change
COPY D:i386NTLDR C:
COPY D:i386NTDETECT.COM C:
FIXBOOT
followed by a reboot - no change
FIXMBR (yes to proceed)
followed by a reboot -- no change
bootcfg /rebuild
WINDOWS XP PROFESSIONAL
/Fastdetect
Those procedures sounded pretty safe to me and I don't think I've damaged my PC any further but ...
I have a strange problem which I can't seem to rectify, I've searched around but can't find a solution. I have a Dell Demension 8400, it has 1GB RAM installed, an 80GB C: drive and I have a 250GB external USB drive (which I use for back-up, I store pictures music etc there) and I'm running Windows XP PRO with SP3+ all fixes installed.
he problem is I can NOT boot info safe mode. (I can boot normally though no problem). When I tap F8 key, I get the safe mode choices just fine (just safe mode or safe mode with networking etc) when I make a choice it starts to load then I get a BSOD with the following message/information
A problem has been detected and windows has been shutdown to prevent damage to the computer. If this is the first time you've seen this stop error screen (it's NOT it happens every safe mode boot no matter if I choose just safe mode or save mode with networking etc.)restart your computer. If this screen appears again, follow these steps:
Check for Viruses on your computer (I do always have Avira's AntiVir running and fully updated, I ran Malwarebytes, Superantispyware, and spybot search & destroy). Remove any newly installed hard drives or hard drive controllers (no new hard drives or controllers). Check your hard drive to make sure it is configured and terminated (I assume it's working I can boot into windows fine normally just NOT in safe mode). Run CHKDSK /F (I did that no problems detected) to check for hard drive corruption and then restart your computer. (the problem of course still exists)
Technical information:
***Stop: 0x0000007B (0xF7C7B524, 0xC0000034, 0x00000000, 0x00000000)"
I'm not 100% sure what to do, I really don't want to format & reinstall Windows from scratch because I have so many "things" which I use alot that I'd not want to try to replace.
Using safe mode isn't 100% essential, but there have been times in the past I needed it to remove a malware that could not be removed in normal mode.
My laptop runs Win XP Pro SP3. Since yesterday, the normal boot does not succeed - but safe mode (with and without networking) are working. I know I am supposed to diagnose the cause in the safe mode, but do not have a clue what the next step ought to be
View 14 Replies View RelatedBasically the original problem was a non functioning WinXP OS that led to using the system restore disc on a Toshiba Satellite laptop. http://forums.techguy.org/windows-nt...dont-work.html
Now the system will only boot in safe mode. So far I've done the restore several times. Gone into msconfig, checked Hide Microsoft services and disabled the rest, unchecked load startup items and tried a Diagnostic Startup. Device Manager looks fine, but I tried disabling items without change. It looks like the Restore Disc is the right one for the system.
i was trying to get into safemode so i could run an antivirus scan, problem is whenever i tried going in safemode the blue screen would pop up and computer would restart. now for some dumb reason i thought maybe i could get in safemode if i used msconfig and selected safe mode from the boot menu. so the computer restarted and now it boots in safemode but the blue screen and restart happen everytime now. ive tried "start windows normally" but that boots in safemode. ive tried "last known good config" and that too boots in safemode. so now im stuck
View 9 Replies View RelatedI tried booting into "Safe Mode" to defrag my computer. Before it goes into "Safe Mode" I get a blue screen stating that "I must remove improperly installed software to proceed". I have not installed any software. I have replaced my cd-rom burner and it is working properly. Any ideas on how a I may access "Safe Mode"??
I am running 2000 pro. Also is there a way I can see what the "Administrative Password" on Win 2000 pro.?
I set up a friends computer with 2000 and I didn't enter a password. Apparently, someone else has entered one but can not remember it, thus their computer is useless without the password.
My computer won't stop booting in safe mode and I can't change it. I have no idea where to start.
View 8 Replies View RelatedBlue Screen Reads: BAD_SYSTEM_CONFIG_INFO. STOP: 0x00000074. Can't boot into safe mode, computer simply reboots instantly and you can see the blue screen for a split second when you select that option or any other option. The only way to see the blue screen is to let the timer time out on the selection of windows did not start properly.Do not have the choice of repair either.
View 14 Replies View RelatedI cannot bootup the computer. It gives me the following error STOP:- c0000218 Registry file failure. The registry cannot load the hive (file) or systemrootsystem32configsecurity or the log or alternate. It is corrupt, absent, or not writeable. Cannot boot to safemode, also tried last known good configuration without success. I have also tried the microsoft KB 307545 fix but could not copy or delete the security file.
First i tried to boot from disk and then it told me that i dont even have a hard drive installed. I fixed this problem by pressing F6 when my windows cd was booting up and now it loads some RAID drivers off from a floppy disk i made up so that the HDD is there.
Just as some other posts have mentioned, i did not try the recovery console and went straight into setting up windows. When it asks me to choose a partition. I selected the one that i created when i built my computer (the one i have very valuable files on) and from there it gives me the "blue screen of death" or so my friend used to call it...the one that says the computer has been shut down to prevent damage to my computer.
Any ideas?
Also, with no other ideas i went into the recovery console... it asks something around "on what volume do you want to recover"...so i press the number 1 which is drive C then from there goes to the blue screen again.
Another thought i ran across is that the disk i am trying to use is a windows xp home and i set up my computer with xp pro....i seem to have lost the disk!!! Im hoping that's not the reason for the blue screen.
Thanks a lot!
My computer has given me problems from day 1. Currently, it fails to recognize my E drive. When rebooting, a black screen appears that says "Secondary drive 1 not found." When restring to an earlier date, a screen says that the E drive cannot be restored because it is either turned off or disabled. The harddrive light which usaully flickers when the computer is working now stays on all the time.
View 3 Replies View Relatedthis is the best way I know to explain all of this. I am running a 3 yr old Gateway with Windows xp and Sp 1 & 2. I have always stayed up to date with my Windows updates deleting cookies, defrags and so on. I am running Avast anti virus and Armor 2 Net firewall. I have noticed over a period of about a mth that my system has been getting pretty slow to boot up and load up web pages. Now I am having to manually start my PC and I have to do it in safe mode F8 and click on debugging mode. If I don't do it this way then everything loads up and then my PC just turns itself off. I have PC doctor and I have done a complete diagnostic test and I have gone to antivirus.com and did a virus scan there as well as with my Avast. I am thinking that I may have to totally take everything out and reinstall everything back in. The only thing is -is that I don't know what to type in to get the whole thing going. Also I have been getting a message but only sometimes that says RTL cannot locate HPOIPMO7.exe (HPOIMO7.exe) I haven't a clue what this is. Might it have anything to do with what is going on. I don't mean to write a book here but there is one other thing, the other day I had a window pop up that said that windows needed me to reinstall my xp software and when I tried it said that the version that I was already running was newer than the cd software I was trying to install and wouldn't accept it.
View 7 Replies View Relatedcomputer was in blue screen. Unplugged and rebooted. Hung at Starting Windows. Unplugged again and rebooted. Selected user and continued on. Hung after desktop image was downloaded and normal desktop was presented. If I moved the cursor to the task bar, got hour glass. Could not get task manager to appear and could not start any program.Booted in safe mode with networking.
View 5 Replies View Relatedwe cant change the display depth below 16bit. we can only see windows in safe mode it just shows a garbled screen in normal mode
View 2 Replies View Relatedbut i think i posted this in the other area before. i had some bugs i couldn't delete in normal mode, so im like oh kay, easy, go in safe and delete the suckers. i restart my computer and f8, and try to go into safe mode, said something about your computer was shut down incorrectly or power lost and some files are missing now.
so im like, ummmmmmmmmmm... how do i get round this. so, i restarted my computer and put it in to the (Last Known Good Configuration), i know, i went to Run>msconfig>Boot.ini>tick /SAFEBOOT and restart my computer, not knowing this was one of the biggest mistakes i've ever done. it starts and it runs a little big and boooom!!! blue screen pops up and this is what it says, "a problem has been detected and windows has been shut down to prevent damange to your computer....
An infinite loop it seems. i was trying to start my pc in safe mode, to delete a .exe file from C:WindowsSystem32 which was suggested by a post to fix the "windows not genuine problem". To be able to do that, i ran msconfig and selected /safeboot under BOOT.INI tab. now everytime i try to reboot my pc it asks me to select an operating system (windows xp pro/microsft windows) if i select windows xp then it asks me to select a startup mode (safe/normal/last successful) and then no matter what i select it will reboot it self, and do the same again. If i select microsoft windows (instead of xp) then it shows MS Windows 98 screen and then goes into DOS prompt. from what i have read in some of the threads is that, i have a virus which is preventing my pc to boot in to safe mode, and because i have selected /safeboot from msconfig windows will only boot in safe mode, meaning i am stuck. the workaround these threads were suggesting was to find the boot.ini file and rename it to something else, which would fix the problem, because this file holds the info about in which mode your pc should boot. i tried to rename this file from command prompt (i cant get into windows, thats why), using "ren c:oot.ini boot.ini" but it says file name invalid. i think this is because its a hidden file. then i tried "attrib -h boot.ini", but it says attrib cannot be used in DOS mode.
View 10 Replies View RelatedI went into MSCONFIG and checked the box to go into safe mode so i could run some virus scans and adware scans and stuff like that. Now when it gets to the desktop it has the window that says Loading Windows and then after like 2-3 min. it says password is incorrect and that i should retype it and becarefull of caps lock and stuff like that. The thing is don't have a password. It does this when i boot normally too but it lets me hit ok and hit Cancel without a password entered.
All of a sudden it tries logging me in automatically when I start up but the thing is i dont need to log in. So I try to go back into normal mode and Ican't. I hit F8 during startup and went to the Boot Normally option but it still does to safe mode. What do I do? How do I log on or how do I get rid of this password thing? One more thing, the window that tells me the password is wrong has an OK box but theres no mouse on the screen for me to click it and I can't use the keyboard to select it.
I've got a problem booting Windows XP in safe mode though it works wll in normal mode. I press on f8 at the begining, I do get the menu where I chose the option "safe mode" and then it seems to boot up but after a few seconds all I get is a black screnn and a blinking cursor on the top left (this lasts for more then 15 mins when I get fed up and try again) What can I do?
View 1 Replies View RelatedI am working on a computer now that is failing to get online in normal mode. It can get online in safe mode.
View 8 Replies View RelatedHello everyone , i have read a lot of posts about slow pc in normal mode but i cant find any help. My PC Starts up very slow... WinRAR , Winamp .. starts also slow , for example i download a file which is rared. i press Open and then it stop responding for awhile
View 3 Replies View RelatedI went into bios and disabled the search for the A: drive , because i couldn't care less. then it brought me to the screen to choose to open in safe mode, normally, or from the last point where windows worked well. problem : i can not use my keyboard in this setting, it works in bios, but i cant choose to load from the last working point of the OS.
View 4 Replies View RelatedWent into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 Replies View RelatedRan smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
View 14 Replies View RelatedThat is my simple question...How it was name safe mode? is it really safe?what happens during safe mode as compared to normal mode and all of the experts suggest to do these(scanning, running, etc) in the safe mode?can files be affected in this mode?
View 14 Replies View RelatedComputer restarts before login screen unless I interupt boot to choose debugging mode (or set it using msconfig). I've disabled everything in msconfig with no change. I've removed all hardward except the minimum. No change. The error I get if I prevent auto restart during boot is a "Multiple_IRP_Complete_Requests) error. This problem started without anything being installed or removed. If I go in to the BIOS and disable ANY devices (i.e. sound), then the Debugging mode trick to get the computer started doesn't work which seems backwards.
View 5 Replies View RelatedI have a dual boot linux/xp system.I was looking at partitions - just listing them - in linux, and now win xp won't come up in normal mode. It will come up in safe mode, however. Can you help me get my "normal mode" back?When the horizontal moving bar comes up in normal mode, it just goes on forever. I see the disk light go on for about 8 cycles of the bar. It usually runs 11 cycles before giving me the user selection screen. Now the disk light goes out after cycle 8, and the bar keeps going. I waited 32 cycles before giving up.
View 1 Replies View Related