After Restore System Is Booting Only In Safe Mode
May 21, 2006
Basically the original problem was a non functioning WinXP OS that led to using the system restore disc on a Toshiba Satellite laptop. http://forums.techguy.org/windows-nt...dont-work.html
Now the system will only boot in safe mode. So far I've done the restore several times. Gone into msconfig, checked Hide Microsoft services and disabled the rest, unchecked load startup items and tried a Diagnostic Startup. Device Manager looks fine, but I tried disabling items without change. It looks like the Restore Disc is the right one for the system.
View 14 Replies
ADVERTISEMENT
Oct 18, 2009
i was trying to get into safemode so i could run an antivirus scan, problem is whenever i tried going in safemode the blue screen would pop up and computer would restart. now for some dumb reason i thought maybe i could get in safemode if i used msconfig and selected safe mode from the boot menu. so the computer restarted and now it boots in safemode but the blue screen and restart happen everytime now. ive tried "start windows normally" but that boots in safemode. ive tried "last known good config" and that too boots in safemode. so now im stuck
View 9 Replies
View Related
Apr 30, 2008
Blue Screen Reads: BAD_SYSTEM_CONFIG_INFO. STOP: 0x00000074. Can't boot into safe mode, computer simply reboots instantly and you can see the blue screen for a split second when you select that option or any other option. The only way to see the blue screen is to let the timer time out on the selection of windows did not start properly.Do not have the choice of repair either.
View 14 Replies
View Related
Apr 26, 2006
i want to restore my laptop. had restore turned on until about 3 weeks ago shut it off. question:if you shut off restore does it still keep the last restore points? and is there a way to restore in safe mode (cant boot in reg mode) if restore is shut of. when i try and turn on sys restore in safe mode it say "i cant"
View 1 Replies
View Related
Oct 6, 2010
have a new virus in my computer that deleted one of my files in WINDOWSsystem32 folder, and now when I run my pc, I get an error saying that a file is missing from WINDOWSsystem32 , I want to run system recovery but it won't let me. I tried pressing almost all the F#, so I decided to run safe mode and do a system recovery from inside my windows xp, but my safe mode doesn't work ether. For safe mode I tried F8, and F5
View 4 Replies
View Related
Apr 21, 2005
I am not able to run system restore neither in the normal mode nor in the safe mode? After selecting system restore nothing happens
View 9 Replies
View Related
Jul 22, 2006
Computer having a boot problem. Computer turns on and the screen shows up showing XP loading then the screen just goes black not blue no error messages. I can boot it in safe mode and wanted to do a system restore but evidently system restore is turned off in safe mode so I cannot do that. I tried to boot several times in normal mode and I would get the XP is loading screen followed by a black screen with nothing on it.
View 11 Replies
View Related
Jan 17, 2010
My computer was having a personality disorder so I decided to save all my files from the hard drive and do a system restore back to the original factory settings. I don't have the installation disks anymore and would like to avoid having to order them. When I started the process, the desktop locked up on me. The keyboard wasn't recognized and I couldn't mouse to any programs or functions. It didn't even complete it's startup sequence, and the icons on the right side by the clock never showed up.
So I restarted the computer in safe mode and saved my files. When I tried to do a system restore from safe mode, I got an error stating that system restore was disabled and couldn't be enabled in safe mode. I'd have to restart in normal mode and change the settings. Therein lies the problem: when I start in normal mode the computer locks up immediately, and I can't change the settings
View 14 Replies
View Related
Aug 15, 2010
I have a Dell Optiplex GX280 running Windows XP that doesn`t do anything after start page is loaded except turn off or restart. I can ONLY (won`t allow me to do it in normal mode) do a system restore in safe mode & then it works perfect. When I turnoff or restart it goes back to the same problem - freezes up after start page has loaded. I have to do system restore in safe mode only all over again.
View 3 Replies
View Related
Aug 30, 2010
I had a problem's in my PC because the viruses, I cleaned my PC with a lot of anti-virus and tools to fix that problem's I disable the system restore but the viruses back again.I tried to access to safe mode to clean the system but the PC restart after loading
View 1 Replies
View Related
Sep 24, 2009
I tried System Restore a week ago, but it didn't work. It ran but at the end I got the error message that it didn't complete and couldn't restore to the earlier point. It displayed the red "X." I deleted all of the restore points and set the amount of store to the maximum and set a new restore point. Still it didn't complete. I also ran Malwarebytes - it couldn't find any issues.I tried it in Safe Mode and it worked - it set the new point and renamed three files - two of them were Norton files, the third I didn't recognize. I set a new point and again it DID NOT COMPLETE - I got the same error message!
View 3 Replies
View Related
Sep 15, 2007
I bought a new cpu awhile ago. When I moved my old cpu to my other desk and restarted it, it would only let me start in safe mode. It was working fine prior to this. I tried system restore to many differnt days, but nothing would work. I think I probably need to reinstall windows, but before I do, I was wondering if there is anything else I can try.
View 14 Replies
View Related
Apr 11, 2007
i was following someones guide to remove some viruses, in this proccess i turned off system restore and went into safe mode, but instead of normal safe mode minimal i went into safe mode minimal (alternate shell) which i am now stuck in, i have tried a system restore command which wont work because i'm in safe mode
View 14 Replies
View Related
Dec 25, 2007
After starting my pc i noticed what 99% of data in my hard disk has vanished. it used to be only a 1GB free space there and now it shows 38,8 out of 39 GB. I tried system restore in normal and safe mode. .Thorough description of situation:
PC runs on Windows Xp SP2. It has 2 hard drives where the biggest one is paritioned into three drives: one for Windows installation, second was used for installation files of other programs (I kept Program Files folder there) and the alst one was dedicated for data storage. So the problem occured with the second drive. and as a result i do not have most of my programs running.
View 3 Replies
View Related
Oct 10, 2007
I've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
View 2 Replies
View Related
Aug 20, 2008
I'm having a crisis, my computer crashed...it would not boot up, I get the "Windows did not start successfully" and asked to choose to start windows. If I choose start normally, it just restarts and back to the same screen, none of the safe modes work, the drivers load, black screen, and it just stays like that.
My computer was fine a few days back, then one day I get a blue screen with writing about some error, then something about a win2k.sys and now poof! Can it be saved? I'm a student and all of my work is on that harddrive. I will appreciate the help/advice anyone has to offer.
View 12 Replies
View Related
Oct 16, 2006
I am in a desktop administration class and I have been given a question I can't seem to find an answer for.PC appears to be booting in Safe Mode, however it is not. What is the likely problem?
View 5 Replies
View Related
Apr 5, 2010
Don't know what found it's way into my PC last night but I was suddenly hit with the BSOD showing the following error:
Technical information:
*** STOP: 0x0000007E (0xc0000005, 0x87AB43B2, 0xF79AD270, 0xF79ACF6C)
Normal reboot results in the same screen and trying to boot up into sfae mode just returns me to the setup (F8) screen. So, I figured on a repair for which I've managed to get hold of an XP disc from my mother of all people.
So far I have, based on what I have found from searching the net, via the Recovery Console on the disc I have:
run chkdsk /r
followed by a reboot - no change
COPY D:i386NTLDR C:
COPY D:i386NTDETECT.COM C:
FIXBOOT
followed by a reboot - no change
FIXMBR (yes to proceed)
followed by a reboot -- no change
bootcfg /rebuild
WINDOWS XP PROFESSIONAL
/Fastdetect
Those procedures sounded pretty safe to me and I don't think I've damaged my PC any further but ...
View 10 Replies
View Related
Jan 4, 2009
I have a strange problem which I can't seem to rectify, I've searched around but can't find a solution. I have a Dell Demension 8400, it has 1GB RAM installed, an 80GB C: drive and I have a 250GB external USB drive (which I use for back-up, I store pictures music etc there) and I'm running Windows XP PRO with SP3+ all fixes installed.
he problem is I can NOT boot info safe mode. (I can boot normally though no problem). When I tap F8 key, I get the safe mode choices just fine (just safe mode or safe mode with networking etc) when I make a choice it starts to load then I get a BSOD with the following message/information
A problem has been detected and windows has been shutdown to prevent damage to the computer. If this is the first time you've seen this stop error screen (it's NOT it happens every safe mode boot no matter if I choose just safe mode or save mode with networking etc.)restart your computer. If this screen appears again, follow these steps:
Check for Viruses on your computer (I do always have Avira's AntiVir running and fully updated, I ran Malwarebytes, Superantispyware, and spybot search & destroy). Remove any newly installed hard drives or hard drive controllers (no new hard drives or controllers). Check your hard drive to make sure it is configured and terminated (I assume it's working I can boot into windows fine normally just NOT in safe mode). Run CHKDSK /F (I did that no problems detected) to check for hard drive corruption and then restart your computer. (the problem of course still exists)
Technical information:
***Stop: 0x0000007B (0xF7C7B524, 0xC0000034, 0x00000000, 0x00000000)"
I'm not 100% sure what to do, I really don't want to format & reinstall Windows from scratch because I have so many "things" which I use alot that I'd not want to try to replace.
Using safe mode isn't 100% essential, but there have been times in the past I needed it to remove a malware that could not be removed in normal mode.
View 11 Replies
View Related
Oct 30, 2008
My laptop runs Win XP Pro SP3. Since yesterday, the normal boot does not succeed - but safe mode (with and without networking) are working. I know I am supposed to diagnose the cause in the safe mode, but do not have a clue what the next step ought to be
View 14 Replies
View Related
Jan 25, 2006
I tried booting into "Safe Mode" to defrag my computer. Before it goes into "Safe Mode" I get a blue screen stating that "I must remove improperly installed software to proceed". I have not installed any software. I have replaced my cd-rom burner and it is working properly. Any ideas on how a I may access "Safe Mode"??
I am running 2000 pro. Also is there a way I can see what the "Administrative Password" on Win 2000 pro.?
I set up a friends computer with 2000 and I didn't enter a password. Apparently, someone else has entered one but can not remember it, thus their computer is useless without the password.
View 6 Replies
View Related
Nov 8, 2006
My computer won't stop booting in safe mode and I can't change it. I have no idea where to start.
View 8 Replies
View Related
Aug 13, 2007
I cannot bootup the computer. It gives me the following error STOP:- c0000218 Registry file failure. The registry cannot load the hive (file) or systemrootsystem32configsecurity or the log or alternate. It is corrupt, absent, or not writeable. Cannot boot to safemode, also tried last known good configuration without success. I have also tried the microsoft KB 307545 fix but could not copy or delete the security file.
View 1 Replies
View Related
Jan 15, 2010
I have a virus on my dell laptop and I tried to go into safe mode and do a system restore, but having problems
View 3 Replies
View Related
Aug 7, 2007
i cannot seem to do a system restore any which way i try. not even in "safe mode." i cannot find any kind of information about this anywhere, not even microsoft.i was having this problem before and my system was so messed up i started over and installed a brand new hard drive reinstalled windows xp, driver and anti-virius software. i used my pc for a few hours and now the same stuff is happening again.
View 1 Replies
View Related
Dec 7, 2007
a while back and asked around and finally just did a system restore. A few days later the problem arose again and go fed up with it and did a restore install. That was just over a month ago I think (around Halloween). The problem has returned I haven't made any changes recently, except Windows Updates. Boots only in safe mode no error message. Hangs at the Windows XP Logo with the loading bar.
View 13 Replies
View Related
May 2, 2007
My computer takes me straight too the blue login screen. When i try to login in it immediately logs off. I cant boot into safe mode or restore because when i reboot it takes me directly to the login screen. Can anyone help ?
View 14 Replies
View Related
Sep 29, 2007
Windows XP Home : My desktop boots only in safe mode and system restore fails. Last known good configuration doesn't work too. Normal boot falls in a restart loop. Can somebody help, please ? Problem created by malware (trojans,worms,etc).I use Avast antivirus.
View 8 Replies
View Related
Oct 13, 2009
Went into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 Replies
View Related
Sep 29, 2008
Ran smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
View 14 Replies
View Related
Jan 9, 2008
System was working fine last night when I went to go on it this evening it would not boot fully so I tried to boot it in safe mode and all the other modes avalible but it would not work. I pressed F10 to reset but that failed as well I am running windows xp it never came with a recovery disc when i first bought my computer.
View 9 Replies
View Related