System was working fine last night when I went to go on it this evening it would not boot fully so I tried to boot it in safe mode and all the other modes avalible but it would not work. I pressed F10 to reset but that failed as well I am running windows xp it never came with a recovery disc when i first bought my computer.
View 9 RepliesBasically the original problem was a non functioning WinXP OS that led to using the system restore disc on a Toshiba Satellite laptop. http://forums.techguy.org/windows-nt...dont-work.html
Now the system will only boot in safe mode. So far I've done the restore several times. Gone into msconfig, checked Hide Microsoft services and disabled the rest, unchecked load startup items and tried a Diagnostic Startup. Device Manager looks fine, but I tried disabling items without change. It looks like the Restore Disc is the right one for the system.
i was trying to get into safemode so i could run an antivirus scan, problem is whenever i tried going in safemode the blue screen would pop up and computer would restart. now for some dumb reason i thought maybe i could get in safemode if i used msconfig and selected safe mode from the boot menu. so the computer restarted and now it boots in safemode but the blue screen and restart happen everytime now. ive tried "start windows normally" but that boots in safemode. ive tried "last known good config" and that too boots in safemode. so now im stuck
View 9 Replies View RelatedBlue Screen Reads: BAD_SYSTEM_CONFIG_INFO. STOP: 0x00000074. Can't boot into safe mode, computer simply reboots instantly and you can see the blue screen for a split second when you select that option or any other option. The only way to see the blue screen is to let the timer time out on the selection of windows did not start properly.Do not have the choice of repair either.
View 14 Replies View RelatedI've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
View 2 Replies View RelatedI'm having a crisis, my computer crashed...it would not boot up, I get the "Windows did not start successfully" and asked to choose to start windows. If I choose start normally, it just restarts and back to the same screen, none of the safe modes work, the drivers load, black screen, and it just stays like that.
My computer was fine a few days back, then one day I get a blue screen with writing about some error, then something about a win2k.sys and now poof! Can it be saved? I'm a student and all of my work is on that harddrive. I will appreciate the help/advice anyone has to offer.
I am in a desktop administration class and I have been given a question I can't seem to find an answer for.PC appears to be booting in Safe Mode, however it is not. What is the likely problem?
View 5 Replies View RelatedDon't know what found it's way into my PC last night but I was suddenly hit with the BSOD showing the following error:
Technical information:
*** STOP: 0x0000007E (0xc0000005, 0x87AB43B2, 0xF79AD270, 0xF79ACF6C)
Normal reboot results in the same screen and trying to boot up into sfae mode just returns me to the setup (F8) screen. So, I figured on a repair for which I've managed to get hold of an XP disc from my mother of all people.
So far I have, based on what I have found from searching the net, via the Recovery Console on the disc I have:
run chkdsk /r
followed by a reboot - no change
COPY D:i386NTLDR C:
COPY D:i386NTDETECT.COM C:
FIXBOOT
followed by a reboot - no change
FIXMBR (yes to proceed)
followed by a reboot -- no change
bootcfg /rebuild
WINDOWS XP PROFESSIONAL
/Fastdetect
Those procedures sounded pretty safe to me and I don't think I've damaged my PC any further but ...
I have a strange problem which I can't seem to rectify, I've searched around but can't find a solution. I have a Dell Demension 8400, it has 1GB RAM installed, an 80GB C: drive and I have a 250GB external USB drive (which I use for back-up, I store pictures music etc there) and I'm running Windows XP PRO with SP3+ all fixes installed.
he problem is I can NOT boot info safe mode. (I can boot normally though no problem). When I tap F8 key, I get the safe mode choices just fine (just safe mode or safe mode with networking etc) when I make a choice it starts to load then I get a BSOD with the following message/information
A problem has been detected and windows has been shutdown to prevent damage to the computer. If this is the first time you've seen this stop error screen (it's NOT it happens every safe mode boot no matter if I choose just safe mode or save mode with networking etc.)restart your computer. If this screen appears again, follow these steps:
Check for Viruses on your computer (I do always have Avira's AntiVir running and fully updated, I ran Malwarebytes, Superantispyware, and spybot search & destroy). Remove any newly installed hard drives or hard drive controllers (no new hard drives or controllers). Check your hard drive to make sure it is configured and terminated (I assume it's working I can boot into windows fine normally just NOT in safe mode). Run CHKDSK /F (I did that no problems detected) to check for hard drive corruption and then restart your computer. (the problem of course still exists)
Technical information:
***Stop: 0x0000007B (0xF7C7B524, 0xC0000034, 0x00000000, 0x00000000)"
I'm not 100% sure what to do, I really don't want to format & reinstall Windows from scratch because I have so many "things" which I use alot that I'd not want to try to replace.
Using safe mode isn't 100% essential, but there have been times in the past I needed it to remove a malware that could not be removed in normal mode.
My laptop runs Win XP Pro SP3. Since yesterday, the normal boot does not succeed - but safe mode (with and without networking) are working. I know I am supposed to diagnose the cause in the safe mode, but do not have a clue what the next step ought to be
View 14 Replies View RelatedThe system is a 1.7 Celeron on a MB with ID# P4MXB Win XP Home Edition
Whenever the computer is booting into windows or into windows (within 20 minutes) the video cuts off and goes into something like a standby mode except the only way i can get it to boot back is to reboot computer. If i put a video card in and don't use on board video the computer freezes when i imagine it would normally black out. It never does this in the Bio's.
I tried booting into "Safe Mode" to defrag my computer. Before it goes into "Safe Mode" I get a blue screen stating that "I must remove improperly installed software to proceed". I have not installed any software. I have replaced my cd-rom burner and it is working properly. Any ideas on how a I may access "Safe Mode"??
I am running 2000 pro. Also is there a way I can see what the "Administrative Password" on Win 2000 pro.?
I set up a friends computer with 2000 and I didn't enter a password. Apparently, someone else has entered one but can not remember it, thus their computer is useless without the password.
My computer won't stop booting in safe mode and I can't change it. I have no idea where to start.
View 8 Replies View RelatedI cannot bootup the computer. It gives me the following error STOP:- c0000218 Registry file failure. The registry cannot load the hive (file) or systemrootsystem32configsecurity or the log or alternate. It is corrupt, absent, or not writeable. Cannot boot to safemode, also tried last known good configuration without success. I have also tried the microsoft KB 307545 fix but could not copy or delete the security file.
Went into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 Replies View RelatedRan smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
View 14 Replies View RelatedI have (or, rather, had) an eMachines desktop running XP Home. I fried its motherboard but the HDD remained intact. I pulled it out and found another system running XP Pro (a Dell Precision desktop). However, simply swapping the HDDs to boot up from the eMachines' drive on the Dell did not work: it complained about hardware mismatch and I could not even start Windows in Safe mode. Is there any way to do this? What else do I need to do to get it to work?I am trying to avoid getting a new computer at this point, so getting the Dell to "be just like" my old eMachines would be ideal.
View 1 Replies View RelatedI have (or, rather, had) an eMachines desktop running XP Home. I fried its motherboard but the HDD remained intact. I pulled it out and found another system running XP Pro (a Dell Precision desktop). However, simply swapping the HDDs to boot up from the eMachines' drive on the Dell did not work: it complained about hardware mismatch and I could not even start Windows in Safe mode. Is there any way to do this? What else do I need to do to get it to work?
View 3 Replies View Relatedi am trying to fix a computer for a friend of mine. it is not booting. i know that i could take the easy way out and format the HD, then reinstall windows. but i want to actually FIX IT, if you know what i mean. This is what happens.1. i press the power button on the laptop 2. the first screen that pops up is black with the words:
SMART Failure Predicted on Hard Disk 0: TOSHIBA MK4025GAS-(PM)Cannot_Find_Strin Cannot_Find_StringPress F1 to Continue3. when i press F1 it says that windows did not start sucessfully. it also gives me a choice to enter in Safte Mode, Safe Mode with Networking, Safe Mode with Command Prompt, Last Known Good Config, or Start Windows Noramlly.
My son's computer has Windows 2000. It keeps starting over and over. It will only get to the Windows 2000 screen and then it restarts. It does this constantly. It won't even get to the desk top screen.
View 11 Replies View RelatedI've been having a re-occurring PC problem that is driving me nuts! I'd appreciate it if someone could look over the following "error messages" that I get on my PC, perhaps diagnose the problem, and hopefully suggest solutions that I could try.
For your reference: I use Windows XP Home Version - Service Patch 2 as my operating system. The PC is a Gateway 700XL that I purchased in February 2002: Intel Pentium IIII 2.2.GHz processor, Intel 850 chipset, & 400 Mhz front side bus. I keep my operating system updated as well as my Norton AntiVirus program. I have "intermediate" PC skills. Usually I help others, but not this time
Whenever i boot the system,it says scan C drive.even though i shut down it properly.
I just did a fresh restore of Windows XP Media SP2 from manufacturers restore DVD, and downloaded all of the Hot Fixes and updates from Microsoft. Everything was fine for about a day, but now the system boots, I get to the black screen where it asks you if you want to start Normally or in Safe Mode, or last known configuration that worked. No mater what I choose, it just shuts off.
This is the reason I did the full system restore in the first place.I dont know if this is related, but when I hook up the hard drive to my laptop to scan for viruses and spyware (you never know), the hard drive keeps shutting on and off. But it doesnt do that when its hooked up to the tower in which it came from, so it might just be the device Im using
I am having problems booting my laptop, it is a HP Pavilion ze4111s laptop, installed with Windows XP Home edition. I have tried using all the system recovery disks that came with the laptop and tried rebooting from the cd-rom but nothing is working. It says eventually when it does something after test bios that HP EEPROM has been reinitialized and to resume or enter setup. when booting from cd-rom and pressing to resume, it says "wrong CD for this notebook".
View 4 Replies View RelatedI tried to boot my computer and after the HP logo i got a black screen that reads ;
"SMART Failure Predicted on Hard Disk 0: Toshiba MK6025GAS-(PM)
1720 - S.M.A.R.T. Hard Drive detects imminent failure (Failing Attr :05h)Please back up the contents of the hard drive and run HDD self test in F2 setup ress F1 to continue"
The HDD self test fails #1-07
I had some failure and have recovered everything and upgraded to SP2.However, now after the POST as we go to load windows it tells me tohighlight which O/S I want to use.I always take the first (Windows XP Home Edition) and it boots andoperates fine. However, the second choice is also Window XP HomeEdition and if I take it it tells me there is a disk hardware error and it cannot boot.
View 2 Replies View RelatedAfter Booting XP I get the blue screen with this message C0000221 {Bad image checksum} The image msvcrt.dll is possibly corrupt.The header checksum does not match the computed checksum
View 2 Replies View RelatedI have a Toshiba Satellite running MS Windows XP Home Edition Version 2002. I have been receiving the following error for quite some time now. I had emailed Microsoft couple of times to ask what else I could do to resolve this and they did not respond.Error after booting up:Windows cannot find C:WINDOWSsystem32,egsvr32.exe. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then Search.
View 2 Replies View RelatedTurning off my laptop and instead it restarted and froze. Will not boot in safe, last known config or anything. I can go into BIOS and debugging and such but will not boot up sys. Here is the last line it sticks at: multi(0)disk(0)rdisk(0)partition(2) WINDOWSSystem32Drivers Mup.sys. I then tried PC Restore (nothing) have no recovery CD so tried to boot useing XP Home SP2 disk and got this STOP MESSAGE : ***STOP: 0X00000007E pci.sys address F85480BF base at F8541000, DATE STAMP 3b7d855c.
View 12 Replies View Relatedcan a system plays a sound when booting?
View 9 Replies View RelatedI have a Dell laptop and since today, when i turn the computer on, it goes past the dell screen, then goes to the screen where it says "We apologize for the inconvenience" then gives me options of safe mode, with networking, with command prompt, Last known good configuration, or start it normally. No matter which option i pick, it just comes beck to the same screen.
View 14 Replies View Related