I bought a new cpu awhile ago. When I moved my old cpu to my other desk and restarted it, it would only let me start in safe mode. It was working fine prior to this. I tried system restore to many differnt days, but nothing would work. I think I probably need to reinstall windows, but before I do, I was wondering if there is anything else I can try.
View 14 Replies
I tried System Restore a week ago, but it didn't work. It ran but at the end I got the error message that it didn't complete and couldn't restore to the earlier point. It displayed the red "X." I deleted all of the restore points and set the amount of store to the maximum and set a new restore point. Still it didn't complete. I also ran Malwarebytes - it couldn't find any issues.I tried it in Safe Mode and it worked - it set the new point and renamed three files - two of them were Norton files, the third I didn't recognize. I set a new point and again it DID NOT COMPLETE - I got the same error message!
View 3 Replies View RelatedWindows XP Home : My desktop boots only in safe mode and system restore fails. Last known good configuration doesn't work too. Normal boot falls in a restart loop. Can somebody help, please ? Problem created by malware (trojans,worms,etc).I use Avast antivirus.
View 8 Replies View Relatedi want to restore my laptop. had restore turned on until about 3 weeks ago shut it off. question:if you shut off restore does it still keep the last restore points? and is there a way to restore in safe mode (cant boot in reg mode) if restore is shut of. when i try and turn on sys restore in safe mode it say "i cant"
View 1 Replies View Relatedhave a new virus in my computer that deleted one of my files in WINDOWSsystem32 folder, and now when I run my pc, I get an error saying that a file is missing from WINDOWSsystem32 , I want to run system recovery but it won't let me. I tried pressing almost all the F#, so I decided to run safe mode and do a system recovery from inside my windows xp, but my safe mode doesn't work ether. For safe mode I tried F8, and F5
View 4 Replies View RelatedI am not able to run system restore neither in the normal mode nor in the safe mode? After selecting system restore nothing happens
View 9 Replies View RelatedComputer having a boot problem. Computer turns on and the screen shows up showing XP loading then the screen just goes black not blue no error messages. I can boot it in safe mode and wanted to do a system restore but evidently system restore is turned off in safe mode so I cannot do that. I tried to boot several times in normal mode and I would get the XP is loading screen followed by a black screen with nothing on it.
View 11 Replies View RelatedBasically the original problem was a non functioning WinXP OS that led to using the system restore disc on a Toshiba Satellite laptop. http://forums.techguy.org/windows-nt...dont-work.html
Now the system will only boot in safe mode. So far I've done the restore several times. Gone into msconfig, checked Hide Microsoft services and disabled the rest, unchecked load startup items and tried a Diagnostic Startup. Device Manager looks fine, but I tried disabling items without change. It looks like the Restore Disc is the right one for the system.
My computer was having a personality disorder so I decided to save all my files from the hard drive and do a system restore back to the original factory settings. I don't have the installation disks anymore and would like to avoid having to order them. When I started the process, the desktop locked up on me. The keyboard wasn't recognized and I couldn't mouse to any programs or functions. It didn't even complete it's startup sequence, and the icons on the right side by the clock never showed up.
So I restarted the computer in safe mode and saved my files. When I tried to do a system restore from safe mode, I got an error stating that system restore was disabled and couldn't be enabled in safe mode. I'd have to restart in normal mode and change the settings. Therein lies the problem: when I start in normal mode the computer locks up immediately, and I can't change the settings
I have a Dell Optiplex GX280 running Windows XP that doesn`t do anything after start page is loaded except turn off or restart. I can ONLY (won`t allow me to do it in normal mode) do a system restore in safe mode & then it works perfect. When I turnoff or restart it goes back to the same problem - freezes up after start page has loaded. I have to do system restore in safe mode only all over again.
View 3 Replies View RelatedI had a problem's in my PC because the viruses, I cleaned my PC with a lot of anti-virus and tools to fix that problem's I disable the system restore but the viruses back again.I tried to access to safe mode to clean the system but the PC restart after loading
View 1 Replies View Relatedi was following someones guide to remove some viruses, in this proccess i turned off system restore and went into safe mode, but instead of normal safe mode minimal i went into safe mode minimal (alternate shell) which i am now stuck in, i have tried a system restore command which wont work because i'm in safe mode
View 14 Replies View RelatedAfter starting my pc i noticed what 99% of data in my hard disk has vanished. it used to be only a 1GB free space there and now it shows 38,8 out of 39 GB. I tried system restore in normal and safe mode. .Thorough description of situation:
PC runs on Windows Xp SP2. It has 2 hard drives where the biggest one is paritioned into three drives: one for Windows installation, second was used for installation files of other programs (I kept Program Files folder there) and the alst one was dedicated for data storage. So the problem occured with the second drive. and as a result i do not have most of my programs running.
i am having a couple of problems my help and support will not work say system service not running , i have some copy disks that you have to go to my computer and open the cd drive but all i get when i try to open it there is a key next to it saying safe mode and it will not open.
View 3 Replies View RelatedI have a computer that will not boot up except for in safe mode, probably due to a virus. When I attempt to install the latest Ad-Aware, I get the following message:"Windows Installer: The system administrator has set policies to prevent this installation" I am currently logged in as administrator
View 2 Replies View Relatedmy computer hasnt been able to go into safe mode the last two times some bad thing has happened to it. i can easily get into the menu where you have to select how you want to start up, but when i select safe mode, it just sends a wall of text down, and stops at "mup.sys" each time. from there i have to reboot to get it to do anything.now my main problem is that i disabled the graphics card i have installed in the pci and the motherboards default graphics card (i wanted to use the original one so i could transfer my graphics card to a different computer), so i cant really do much about getting into windows to change that, with out being able to run in safe mode.
View 2 Replies View RelatedPC Freezing up. Restored to two weeks ago whenh didn't have the prob but still frezing. Usually after 5-30 mins of use.Started after BBand installed. Wonder if its an overheating prob.CPU variesd fromm 65-82C when idle and fan sticks at 2163 revs and doesn't change.
View 13 Replies View RelatedI have a virus on my dell laptop and I tried to go into safe mode and do a system restore, but having problems
View 3 Replies View Relatedi cannot seem to do a system restore any which way i try. not even in "safe mode." i cannot find any kind of information about this anywhere, not even microsoft.i was having this problem before and my system was so messed up i started over and installed a brand new hard drive reinstalled windows xp, driver and anti-virius software. i used my pc for a few hours and now the same stuff is happening again.
View 1 Replies View RelatedIn device manage it has exclamation by it i uninstalled but if i do add hardware its located w/ exclamation by itif i uninstall an restart its back with exclamation dont work in safe mode works be4 boot when i type in password its disabled on boot.
View 1 Replies View Relateda while back and asked around and finally just did a system restore. A few days later the problem arose again and go fed up with it and did a restore install. That was just over a month ago I think (around Halloween). The problem has returned I haven't made any changes recently, except Windows Updates. Boots only in safe mode no error message. Hangs at the Windows XP Logo with the loading bar.
View 13 Replies View RelatedI was incredibly bored and I downloaded an old DOS VGA version of The Oregon Trail from the-underdogs. I used VDMsound to run it, and everything seemed to work alright until i got sick of the game and tried to quit. It locked up, i used ctrl-alt-del a few times, got impatient and stupidly switched off the computer just as i was being dumped back to windows. When i turned the computer back on, i was given the "safe mode" prompt, so i chose to start in safe mode. It then showed that list of system files(?) it was loading until it gets to "d347bus.sys" and asks if i want to press escape to skip loading it. Regardless of whether i press esc or not, it moves on to "SPTD.sys" and asks the same question. After i press escape (or not), i get a black screen, then the computer restarts again back to the safe mode prompt. If i try to "start windows normally" i get to the Windows XP loading screen, the progress bar moves a bit then the whole thing restarts again. Safe mode with command prompt, safe mode with networking, last known good configuration, none of these work, they all result in this maddening infinite loop.
View 2 Replies View RelatedI have a machine running win xp home edition SP2 that will not load windows up unless I do it by way of safe mode. It goes to the black xp screen and hangs up there. I did a system restore to an earlier date in safe mode but when it resarted i got the same results. Is this a symtom of a bad CMOS battery? The system has been running good for 3 years and this just started today.
View 8 Replies View RelatedMy computer takes me straight too the blue login screen. When i try to login in it immediately logs off. I cant boot into safe mode or restore because when i reboot it takes me directly to the login screen. Can anyone help ?
View 14 Replies View RelatedMy desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
View 4 Replies View Relatedpc wont boot. its a sata hard disk which is detected upon boot. however i dont even get the windows splash screen. in the bios - the hd doesnt show up. safe mode doesnt work neither does last known good settings. i put the xp disk in and attempted to do an (install followed by a repair ) rather than system console. nothing works because the xp disk claims no hard drive exists. is it cos its serial ata. im not exactly sure if its got raid setup etc although i do possibly remeber a viaraidtool popup that might have come up on the odd times ive been over and used my dads pc to educate him on eBay. :-) anybody got an idea. sorry i dont have specs.
View 8 Replies View RelatedWent into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 Replies View RelatedRan smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
View 14 Replies View RelatedI went into bios and disabled the search for the A: drive , because i couldn't care less. then it brought me to the screen to choose to open in safe mode, normally, or from the last point where windows worked well. problem : i can not use my keyboard in this setting, it works in bios, but i cant choose to load from the last working point of the OS.
View 4 Replies View RelatedPowers on to the normal blue screen. Black screen comes up that says We apologize for the inconvience...etc. etc. windows did not shut down normally and gives the option for last know good configeration, start windows normally, safe mode, etc. Tried them all and it just goes back to the normal blue screen and back to We apologize for the inconvience. F10 system recovery does the same thing.I would like to be able to fix this and not lose any of the information I have on my hard drive. I did a total back-up about 7 months ago (13 DVDs worth) and do have some backup through Norton 360
View 11 Replies View RelatedA family members sony vaio will not boot up, the computer doesnt load windows XP (The windows XP loading screen appears but will then goes blank and reboots automatically.) When the computer first turns on a blank screen appears with text saying "we're sorry for the inconvienice, etc..." then has a 30 second timer for which option i would like to choose.These are my options below (which none work).
It doesnt work on Safe Mode, Safe Mode (Networking), Safe Mode (Command Prompt) or even the "last known to work configurations". Im totally lost on what i can do from here. I need assistence people!!
