Safe Mode Wont Work
Mar 3, 2007
my computer hasnt been able to go into safe mode the last two times some bad thing has happened to it. i can easily get into the menu where you have to select how you want to start up, but when i select safe mode, it just sends a wall of text down, and stops at "mup.sys" each time. from there i have to reboot to get it to do anything.now my main problem is that i disabled the graphics card i have installed in the pci and the motherboards default graphics card (i wanted to use the original one so i could transfer my graphics card to a different computer), so i cant really do much about getting into windows to change that, with out being able to run in safe mode.
View 2 Replies
ADVERTISEMENT
May 3, 2007
In device manage it has exclamation by it i uninstalled but if i do add hardware its located w/ exclamation by itif i uninstall an restart its back with exclamation dont work in safe mode works be4 boot when i type in password its disabled on boot.
View 1 Replies
View Related
Aug 6, 2007
I was incredibly bored and I downloaded an old DOS VGA version of The Oregon Trail from the-underdogs. I used VDMsound to run it, and everything seemed to work alright until i got sick of the game and tried to quit. It locked up, i used ctrl-alt-del a few times, got impatient and stupidly switched off the computer just as i was being dumped back to windows. When i turned the computer back on, i was given the "safe mode" prompt, so i chose to start in safe mode. It then showed that list of system files(?) it was loading until it gets to "d347bus.sys" and asks if i want to press escape to skip loading it. Regardless of whether i press esc or not, it moves on to "SPTD.sys" and asks the same question. After i press escape (or not), i get a black screen, then the computer restarts again back to the safe mode prompt. If i try to "start windows normally" i get to the Windows XP loading screen, the progress bar moves a bit then the whole thing restarts again. Safe mode with command prompt, safe mode with networking, last known good configuration, none of these work, they all result in this maddening infinite loop.
View 2 Replies
View Related
Jan 28, 2007
I have a machine running win xp home edition SP2 that will not load windows up unless I do it by way of safe mode. It goes to the black xp screen and hangs up there. I did a system restore to an earlier date in safe mode but when it resarted i got the same results. Is this a symtom of a bad CMOS battery? The system has been running good for 3 years and this just started today.
View 8 Replies
View Related
Sep 29, 2007
Windows XP Home : My desktop boots only in safe mode and system restore fails. Last known good configuration doesn't work too. Normal boot falls in a restart loop. Can somebody help, please ? Problem created by malware (trojans,worms,etc).I use Avast antivirus.
View 8 Replies
View Related
Mar 9, 2010
My desktop is stuck on an infinite startup loop, I can see the standards Windows starting screen then there is a quick BSOD flash and the computer restarts and does the same thing - lucky I have a spare old laptop which will allow me to jump onto this site. Safe mode options do not work I tried the Windows recovery console - typing 'R' booting from the CD but then I get stuck at the console black screen not knowing what DOS commands I should be pushing. I tried goign the other way and choosing to install XP but then I get a message saying C: isn;t configured and will need to format to continue.
View 4 Replies
View Related
Sep 24, 2009
I tried System Restore a week ago, but it didn't work. It ran but at the end I got the error message that it didn't complete and couldn't restore to the earlier point. It displayed the red "X." I deleted all of the restore points and set the amount of store to the maximum and set a new restore point. Still it didn't complete. I also ran Malwarebytes - it couldn't find any issues.I tried it in Safe Mode and it worked - it set the new point and renamed three files - two of them were Norton files, the third I didn't recognize. I set a new point and again it DID NOT COMPLETE - I got the same error message!
View 3 Replies
View Related
Nov 23, 2006
pc wont boot. its a sata hard disk which is detected upon boot. however i dont even get the windows splash screen. in the bios - the hd doesnt show up. safe mode doesnt work neither does last known good settings. i put the xp disk in and attempted to do an (install followed by a repair ) rather than system console. nothing works because the xp disk claims no hard drive exists. is it cos its serial ata. im not exactly sure if its got raid setup etc although i do possibly remeber a viaraidtool popup that might have come up on the odd times ive been over and used my dads pc to educate him on eBay. :-) anybody got an idea. sorry i dont have specs.
View 8 Replies
View Related
Sep 15, 2007
I bought a new cpu awhile ago. When I moved my old cpu to my other desk and restarted it, it would only let me start in safe mode. It was working fine prior to this. I tried system restore to many differnt days, but nothing would work. I think I probably need to reinstall windows, but before I do, I was wondering if there is anything else I can try.
View 14 Replies
View Related
Oct 9, 2009
Powers on to the normal blue screen. Black screen comes up that says We apologize for the inconvience...etc. etc. windows did not shut down normally and gives the option for last know good configeration, start windows normally, safe mode, etc. Tried them all and it just goes back to the normal blue screen and back to We apologize for the inconvience. F10 system recovery does the same thing.I would like to be able to fix this and not lose any of the information I have on my hard drive. I did a total back-up about 7 months ago (13 DVDs worth) and do have some backup through Norton 360
View 11 Replies
View Related
Mar 27, 2008
A family members sony vaio will not boot up, the computer doesnt load windows XP (The windows XP loading screen appears but will then goes blank and reboots automatically.) When the computer first turns on a blank screen appears with text saying "we're sorry for the inconvienice, etc..." then has a 30 second timer for which option i would like to choose.These are my options below (which none work).
It doesnt work on Safe Mode, Safe Mode (Networking), Safe Mode (Command Prompt) or even the "last known to work configurations". Im totally lost on what i can do from here. I need assistence people!!
View 11 Replies
View Related
Jan 15, 2009
i am having a couple of problems my help and support will not work say system service not running , i have some copy disks that you have to go to my computer and open the cd drive but all i get when i try to open it there is a key next to it saying safe mode and it will not open.
View 3 Replies
View Related
Feb 22, 2008
I have a computer that will not boot up except for in safe mode, probably due to a virus. When I attempt to install the latest Ad-Aware, I get the following message:"Windows Installer: The system administrator has set policies to prevent this installation" I am currently logged in as administrator
View 2 Replies
View Related
Mar 1, 2005
this is the best way I know to explain all of this. I am running a 3 yr old Gateway with Windows xp and Sp 1 & 2. I have always stayed up to date with my Windows updates deleting cookies, defrags and so on. I am running Avast anti virus and Armor 2 Net firewall. I have noticed over a period of about a mth that my system has been getting pretty slow to boot up and load up web pages. Now I am having to manually start my PC and I have to do it in safe mode F8 and click on debugging mode. If I don't do it this way then everything loads up and then my PC just turns itself off. I have PC doctor and I have done a complete diagnostic test and I have gone to antivirus.com and did a virus scan there as well as with my Avast. I am thinking that I may have to totally take everything out and reinstall everything back in. The only thing is -is that I don't know what to type in to get the whole thing going. Also I have been getting a message but only sometimes that says RTL cannot locate HPOIPMO7.exe (HPOIMO7.exe) I haven't a clue what this is. Might it have anything to do with what is going on. I don't mean to write a book here but there is one other thing, the other day I had a window pop up that said that windows needed me to reinstall my xp software and when I tried it said that the version that I was already running was newer than the cd software I was trying to install and wouldn't accept it.
View 7 Replies
View Related
Dec 23, 2008
computer was in blue screen. Unplugged and rebooted. Hung at Starting Windows. Unplugged again and rebooted. Selected user and continued on. Hung after desktop image was downloaded and normal desktop was presented. If I moved the cursor to the task bar, got hour glass. Could not get task manager to appear and could not start any program.Booted in safe mode with networking.
View 5 Replies
View Related
Jul 26, 2005
we cant change the display depth below 16bit. we can only see windows in safe mode it just shows a garbled screen in normal mode
View 2 Replies
View Related
Dec 18, 2004
but i think i posted this in the other area before. i had some bugs i couldn't delete in normal mode, so im like oh kay, easy, go in safe and delete the suckers. i restart my computer and f8, and try to go into safe mode, said something about your computer was shut down incorrectly or power lost and some files are missing now.
so im like, ummmmmmmmmmm... how do i get round this. so, i restarted my computer and put it in to the (Last Known Good Configuration), i know, i went to Run>msconfig>Boot.ini>tick /SAFEBOOT and restart my computer, not knowing this was one of the biggest mistakes i've ever done. it starts and it runs a little big and boooom!!! blue screen pops up and this is what it says, "a problem has been detected and windows has been shut down to prevent damange to your computer....
View 6 Replies
View Related
Sep 17, 2009
An infinite loop it seems. i was trying to start my pc in safe mode, to delete a .exe file from C:WindowsSystem32 which was suggested by a post to fix the "windows not genuine problem". To be able to do that, i ran msconfig and selected /safeboot under BOOT.INI tab. now everytime i try to reboot my pc it asks me to select an operating system (windows xp pro/microsft windows) if i select windows xp then it asks me to select a startup mode (safe/normal/last successful) and then no matter what i select it will reboot it self, and do the same again. If i select microsoft windows (instead of xp) then it shows MS Windows 98 screen and then goes into DOS prompt. from what i have read in some of the threads is that, i have a virus which is preventing my pc to boot in to safe mode, and because i have selected /safeboot from msconfig windows will only boot in safe mode, meaning i am stuck. the workaround these threads were suggesting was to find the boot.ini file and rename it to something else, which would fix the problem, because this file holds the info about in which mode your pc should boot. i tried to rename this file from command prompt (i cant get into windows, thats why), using "ren c:oot.ini boot.ini" but it says file name invalid. i think this is because its a hidden file. then i tried "attrib -h boot.ini", but it says attrib cannot be used in DOS mode.
View 10 Replies
View Related
May 3, 2005
I went into MSCONFIG and checked the box to go into safe mode so i could run some virus scans and adware scans and stuff like that. Now when it gets to the desktop it has the window that says Loading Windows and then after like 2-3 min. it says password is incorrect and that i should retype it and becarefull of caps lock and stuff like that. The thing is don't have a password. It does this when i boot normally too but it lets me hit ok and hit Cancel without a password entered.
All of a sudden it tries logging me in automatically when I start up but the thing is i dont need to log in. So I try to go back into normal mode and Ican't. I hit F8 during startup and went to the Boot Normally option but it still does to safe mode. What do I do? How do I log on or how do I get rid of this password thing? One more thing, the window that tells me the password is wrong has an OK box but theres no mouse on the screen for me to click it and I can't use the keyboard to select it.
View 14 Replies
View Related
Jul 26, 2005
I've got a problem booting Windows XP in safe mode though it works wll in normal mode. I press on f8 at the begining, I do get the menu where I chose the option "safe mode" and then it seems to boot up but after a few seconds all I get is a black screnn and a blinking cursor on the top left (this lasts for more then 15 mins when I get fed up and try again) What can I do?
View 1 Replies
View Related
Dec 14, 2005
I am working on a computer now that is failing to get online in normal mode. It can get online in safe mode.
View 8 Replies
View Related
Oct 10, 2007
I've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
View 2 Replies
View Related
May 21, 2008
Hello everyone , i have read a lot of posts about slow pc in normal mode but i cant find any help. My PC Starts up very slow... WinRAR , Winamp .. starts also slow , for example i download a file which is rared. i press Open and then it stop responding for awhile
View 3 Replies
View Related
Apr 1, 2006
I went into bios and disabled the search for the A: drive , because i couldn't care less. then it brought me to the screen to choose to open in safe mode, normally, or from the last point where windows worked well. problem : i can not use my keyboard in this setting, it works in bios, but i cant choose to load from the last working point of the OS.
View 4 Replies
View Related
Oct 13, 2009
Went into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 Replies
View Related
Sep 29, 2008
Ran smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
View 14 Replies
View Related
Mar 9, 2006
That is my simple question...How it was name safe mode? is it really safe?what happens during safe mode as compared to normal mode and all of the experts suggest to do these(scanning, running, etc) in the safe mode?can files be affected in this mode?
View 14 Replies
View Related
Jun 7, 2010
Computer restarts before login screen unless I interupt boot to choose debugging mode (or set it using msconfig). I've disabled everything in msconfig with no change. I've removed all hardward except the minimum. No change. The error I get if I prevent auto restart during boot is a "Multiple_IRP_Complete_Requests) error. This problem started without anything being installed or removed. If I go in to the BIOS and disable ANY devices (i.e. sound), then the Debugging mode trick to get the computer started doesn't work which seems backwards.
View 5 Replies
View Related
Mar 20, 2007
I have a dual boot linux/xp system.I was looking at partitions - just listing them - in linux, and now win xp won't come up in normal mode. It will come up in safe mode, however. Can you help me get my "normal mode" back?When the horizontal moving bar comes up in normal mode, it just goes on forever. I see the disk light go on for about 8 cycles of the bar. It usually runs 11 cycles before giving me the user selection screen. Now the disk light goes out after cycle 8, and the bar keeps going. I waited 32 cycles before giving up.
View 1 Replies
View Related
Jul 7, 2007
I can boot up in safe mode, but it's frozen up a couple times, over about 20 hours of usage, and I've had to restart.I've tried running adaware, windows defender, housecall, kaspersky online scanner. They came up with 4-5 items but it didn't fix the problem.
View 7 Replies
View Related
Nov 17, 2007
On System Configuration utility (start<run<"type" msconfig) on boot ini tab I selected Safe mode & Minimal (Alternateshell) & restarted. Then On the screen I see only a dos prompt window, CMD.exe. No graphical window. No start menu or other destop icons.Restart & try with F8 key, other F keys...... no use. Then I repaired with the win xp cd. The problem going more worst than before. The machine display a message "Windows xp setup cannot run under safemode . Setup will restart now". Either I close it or OK it, machine restarts. I can't even try anything now
View 4 Replies
View Related
