BSOD Safe Mode - Stop Error Screen
Aug 24, 2008
An app was installed, and right after, a BSOD came up with the following error message: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Technical information: *** STOP: 0x0000008E (0xC0000005, 0xBF803EF6, 0xF70917c4, 0x00000000) *** win32ksys - Address BF 803EF6 base at BF800000, DateStamp 43446a58 Beginning dump of physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance......
View 1 Replies
ADVERTISEMENT
Jun 15, 2005
In trying to get rid of some adware, I attempted to boot my computer (P4 2.8 GHz, 1.5 GB Ram, Windows XP SP2) in safe mode. When I selected "Safe Mode with Networking", I was brought to a blue screen called a "STOP ERROR SCREEN" - basically it said that it had to stop the booting up of the computer or the computer might be harmed. It suggested removing any recently installed hardware and disabling BIOS memory options such as caching or shadowing. So I rebooted and got into windows normally just fine.
Then I decided to try just regular Safe Mode (without networking) - when I selected that option, the computer started to do it, then rebooted and prompted me if I wanted to boot into Windows normally or safe mode, etc...I tried Safe Mode again - same thing, a reboot. I tried Safe Mode with Networking again - and I got the blue Stop Error Screen again.
This is pretty strange (at least I've never seen it) and I'd really like to be able to boot into safe mode.
View 4 Replies
View Related
Nov 14, 2007
The problem is on my buddies pc. It uses Windows XP Professional. I have it setup next to this pc I'm currently using. First I get this screen:
We apologize for the inconvenience, but Windows did not start successfully. A recent harware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight your choice.
Any choice I highlight brings this screen:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is indentified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with the hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000007E (0x80000003, 0xF8470005, 0xF894C4B4, 0xF894C1B0)
*** SCSIPORT.SYS - Address F8470005 base at F8460000, DateStamp 41107b4b
View 3 Replies
View Related
Jun 14, 2006
I cannot boot to Safe Mode. Using F8 at logo display, I can select Safe Mode, but never get there. Using F12 at logo display, I can boot to Utility Partition to run Express, Extended and Symptom Tree diagnostics which include Cache, Interrupt Controller, System Memory, and HD tests WHICH ALL PASS!! The BSOD error message is: A problem has been detected and Windows has been shut down to prevent damage to your computer. Error info: Stop: 0x0000008E 0xC0000005 0xBF89066B 0xF3F5CAF0 0x00000000 Win32k.sys ADDR BF89066B base at BF800000 DateStamp 3f1487db The OS is Windows XP SP1a. Only the CPU and Monitor are connected.
View 14 Replies
View Related
Sep 28, 2009
I have a dell Inspiron 9100 (Intel Pentium 4 CPU 3.00GHz) desktop running Windows XP SP3 only. I have one fixed 160GB Hard Drive. I have not changed any settings/ installed/removed any programs recently. My last shut down was normal.When i started up the pc i got as far as the xp splash screen which i believe it would have stayed on indefinitely. The scroll bar was still scrolling. So I attempted restart and tried again and the same problem occurred. I then attempted to start in safe mode were the BSOD occurred at what appeared to be the end of the driver loading. I got the message unmountable_boot_volume with the error code 0x000000ED (0X869C45CO, 0XC00000BS, 0X00000000, 0X00000000).
View 1 Replies
View Related
Jun 14, 2005
I have never helped anyone with windows 2000 or 2000 Pro before. When you start the computer it is a blue screen with txt and starts out saying a stop error
Stop:0x0000007B (0x81872030,0xc000014F,0x00000000,0x000000007 INACCESSIBLE_BOOT_DEVICE
Then it says ot run a virus scan and chk disk etc but I can't get into normal or safe mode to do that, when you press F8 to get into safemode it comes up and you press enter then the next screen for windows you press enter then it ends up back at the blue screen witht the error again.
View 14 Replies
View Related
Mar 18, 2006
When I start PC, it automatically takes me to the startup options part to reboot in safe mode, safe mode w/ networking, safemode w/ prompt, last known good config, & normal startup. Getting Stop c0000218 {Registry File Failure} The registry cannot load the hive (file) SystemRootSystem32Config
View 11 Replies
View Related
Feb 26, 2008
For some odd reason whenever I got to Standby mode, I always have a blue-screen error, I cant make out what it says because it goes by so quick and reboots. Here's my current comp setup.
View 1 Replies
View Related
Oct 10, 2007
I've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
View 2 Replies
View Related
Mar 26, 2010
i have similar problem mentioned here URL... but the only difference is that i can use the PC normally without any problem. it gets BSOD only when i try to goto safemode by pressing f8 it says STOP 0x0000007B 0xF789E524 0xC000034 0x00000000 0x00000000
View 2 Replies
View Related
Feb 4, 2009
I have a nasty virus on my desktop (I'm posting this from my laptop now) that I am trying to get rid of. However, it seems that there are a few key files that can't be removed while in normal mode. Every time I try and boot into safe mode (any of them) I get a BSOD with the stop code of 0X0000007B. Anyone know how to fix this, so I can get into safe mode and get rid of these files?
View 5 Replies
View Related
Apr 5, 2010
Don't know what found it's way into my PC last night but I was suddenly hit with the BSOD showing the following error:
Technical information:
*** STOP: 0x0000007E (0xc0000005, 0x87AB43B2, 0xF79AD270, 0xF79ACF6C)
Normal reboot results in the same screen and trying to boot up into sfae mode just returns me to the setup (F8) screen. So, I figured on a repair for which I've managed to get hold of an XP disc from my mother of all people.
So far I have, based on what I have found from searching the net, via the Recovery Console on the disc I have:
run chkdsk /r
followed by a reboot - no change
COPY D:i386NTLDR C:
COPY D:i386NTDETECT.COM C:
FIXBOOT
followed by a reboot - no change
FIXMBR (yes to proceed)
followed by a reboot -- no change
bootcfg /rebuild
WINDOWS XP PROFESSIONAL
/Fastdetect
Those procedures sounded pretty safe to me and I don't think I've damaged my PC any further but ...
View 10 Replies
View Related
Jan 4, 2009
I have a strange problem which I can't seem to rectify, I've searched around but can't find a solution. I have a Dell Demension 8400, it has 1GB RAM installed, an 80GB C: drive and I have a 250GB external USB drive (which I use for back-up, I store pictures music etc there) and I'm running Windows XP PRO with SP3+ all fixes installed.
he problem is I can NOT boot info safe mode. (I can boot normally though no problem). When I tap F8 key, I get the safe mode choices just fine (just safe mode or safe mode with networking etc) when I make a choice it starts to load then I get a BSOD with the following message/information
A problem has been detected and windows has been shutdown to prevent damage to the computer. If this is the first time you've seen this stop error screen (it's NOT it happens every safe mode boot no matter if I choose just safe mode or save mode with networking etc.)restart your computer. If this screen appears again, follow these steps:
Check for Viruses on your computer (I do always have Avira's AntiVir running and fully updated, I ran Malwarebytes, Superantispyware, and spybot search & destroy). Remove any newly installed hard drives or hard drive controllers (no new hard drives or controllers). Check your hard drive to make sure it is configured and terminated (I assume it's working I can boot into windows fine normally just NOT in safe mode). Run CHKDSK /F (I did that no problems detected) to check for hard drive corruption and then restart your computer. (the problem of course still exists)
Technical information:
***Stop: 0x0000007B (0xF7C7B524, 0xC0000034, 0x00000000, 0x00000000)"
I'm not 100% sure what to do, I really don't want to format & reinstall Windows from scratch because I have so many "things" which I use alot that I'd not want to try to replace.
Using safe mode isn't 100% essential, but there have been times in the past I needed it to remove a malware that could not be removed in normal mode.
View 11 Replies
View Related
Jan 18, 2010
I was just using my PC like any other day. Now I am saddened by the fact that I have a BSOD and being unable to use safe mode or trying any other solution just makes me even more sad.
Things Tried That Failed:
Safe Mode
System Recovery
Clean Install of Windows 7
Couldn't keep track of all....
View 1 Replies
View Related
Sep 28, 2009
It then goes into a physical memory dump, finishes, but still same BSOD.i get the same error trying to get into safe mode when trying to reformat or repairing the hard drive using my xp install disc, i get a BSOD stating that the computer has been shut down to prevent any damages and to run a scan disk.
View 14 Replies
View Related
Feb 11, 2005
Heres the bsod message I get :line 1) stop: 0x0000007e ( 0xc0000005, 0xf894a29c, oxf8950500, oxf8950200 ) line 2) pfc.sys- address f894a29c base at f8949000, date stamp 3987f8fc
Thats it XP pro. I have the hard drive thats doing this as my slave drive now (using an old 8 gig as my master) is there any way I can find & fix this problem with the drive being my slave drive now?? It wont boot at all, not even safe mode but seems fine as a slave drive, passes chkdisk , no prob. is there a way to reinstall windows to a slave drive?? thanks guys, IM really stumped on this one.
View 14 Replies
View Related
Jun 18, 2008
I have a Compaq Presario that was left on overnight, connected to an unstable network. The power cord got pulled out and the battery died overnight. I plugged it back in and hit the Power button on the computer, and "Resuming Windows" appeared on the screen, but hung up. I hit the Power button again, waited about 10 seconds, and then hit the Power button a third time.
I got an error apologizing that Windows couldn't start; I had three "Safe Mode" reboot options, as well as the "Last Good Configuration" and "Normal" options. All "Safe Mode" options get to a file called "tiumflt.sys" and then goes to a quick BSOD, then tries to restart, and goes back to the error apologizing that Windows can't start. When I try "Last Good Configuration" or "Normal", I also get taken back to the BSOD. I can change boot order and go into the Phoenix BIOS...the options are the CD Drive, Floppy Drive (which I don't have), HD, or Network Adaptor. Note that the CD Drive is broken as well (has been for some time). I'm currently running the HDD Long Self Test, but the Short Test failed after about 40% complete. I did to some research, and am hoping to get some help before attempting to reset the BIOS by removing the battery from the mother board. I'l be happy to gather whatever additional information you require.
View 2 Replies
View Related
Oct 19, 2009
Last night I upgraded to Internet Explorer 7 from some old version (I use a different browser which is why my copy of IE was so out of date.) When I rebooted to complete the installation I got a BSOD that said IRQL_NOT_LESS_OR_EQUAL. Tried again. Same. Last known good configuration, same. Safe Mode, same. Everything I've tried, same. It's a Dell Inspiron 500m laptop running XP SP2. I'm 99.999% sure it's not a hardware problem.I can't find my XP CD and no one I know seems to have one either so a fix that doesn't require the disc would be ideal.
View 14 Replies
View Related
Feb 9, 2009
When my computer boots up, about 5 seconds after the desktop loads, my screen turns blue with the Physical Memory Dump Error
Stop: 0x0000008E (0xC0000005, 0xEDACCB75, 0xeB6E67F0, 0x0000000)
It boots up in safe mode fine, I have tried system restore and ran multiple virus/malware scans.
View 14 Replies
View Related
Nov 28, 2009
HP Pavillion A1230n with XP Media Center edition. MOBO died a couple of months ago so replaced with ASUS M3N78-VM and 2Gb memory. System has been running great since repair until last week. Began to show signs of IE7 search engine hijack, but all scans show negative (Malwarebytes, SuperAntiSpyware, Avira, etc. Google Chrome worked okay, so problem was specific to IE. Tried to get to Safe Mode to run scans and got BSOD. System would boot "normally", but BSOD with page fault error whenever I tried to boot to Safe Mode. Replaced memory with same results. System now BSOD's on all attempted startups. safe mode, safe mode with networking, safe mode with command prompt, and normal, all with same BSOD results.
Ran Spinrite against drive with negative findings. Created new XP install on another drive and system boots fine. Cloned original boot drive to new 500Gb drive using Clonezilla and get same BSOD results with cloned drive as I did with original drive.
Tried repair install to original drive but system does not recognize new MOBO BIOS as the originator of the Restore disk
View 4 Replies
View Related
Nov 8, 2006
My computer won't stop booting in safe mode and I can't change it. I have no idea where to start.
View 8 Replies
View Related
Apr 8, 2010
How do you fix BSOD and Stop 0x0000007E error?
View 1 Replies
View Related
Jan 3, 2009
computer has a BSoD, Stop error 0x00000024. Many of the guides on the Internet told me to run " chkdsk drive: /f " in Cmd. The problem is that I CANT go past the BSoD to access Cmd, even in safe mode. It is a Windows XP Home Edition.
View 2 Replies
View Related
Jan 9, 2009
The computer I am working on is a Compaq Presario SR1020NX running Windows XP Home Edition. It connects to the internet via a Linksys WMP54G adapter. It tried to install Windows XP SP3 and it failed. While the update was trying to work correcting the changes it made it froze so my b/f powered it off. It rebooted just fine and he was on the internet for a little bit and then it stopped working. We recycled the modem and the router, I reset everything. Tried to uninstall and reinstall the adapter and nothing worked. I contacted Linksys and we tried to use WZC to connect to no avail. After troubleshooting a little more we determined that it had to do with the updates that were just installed on the pc. The tech suggested removing all the updates that were just installed and try again. I tried...but that is where everything went heywire. I uninstalled the first update and rebooted.....then got a blue screen flash up that said autochk program not found - skipping autocheck and then went to an endless boot cycle. I couldn't boot in safe mode, tried last known good config and nothing worked.
View 2 Replies
View Related
Apr 2, 2007
It started yesterday, I was playing around on the computer and only downloaded magiciso.I continued to play around. I shut down the computer and it hasnt been the same since.When it 1st started back up..I got this:Address 80410527 base at 80400000 datestamp 45069e6e - ntoskrnl.exe IRQL not less or equal I tried to get into safe mode but nothing.I then tried last good config and it let me in...so I played around to what I thought would fix things..but when I restarted it again..it wont let me in either way now.
View 2 Replies
View Related
Aug 11, 2008
I have a user who is getting a blue screen that references the following stop codes;
0x000000C2
0x00000000
0x80000000
I looked around but it seemed like a lot of people's issues were resolved by replacing the memory. So here is what I did;
The laptop is an HP 6710b;
- Completely replaced the memory - BSoD still happens
- CHKDSK /F - BSoD still happens
- Latest patches removed - BSoD still happens
- take hard drive out and put into a different, identical 6710b - problem resolved.
| BIOS version is the same on both laptops
View 14 Replies
View Related
Feb 2, 2007
I was informed today that our home computer has been freezing over the last day or so. I logged on and looked up some info on the error i was described, then perhaps fortunately, i got the vile BSOD. This is what was contained:Then it began a memory dump.It claims a device driver error, but i do not recall installing anything recently. the windows report proved less than helpful (surprise).
View 1 Replies
View Related
Dec 3, 2006
As in the title, im faced with a permanent 7B BSOD stop error message on my pavillion laptop. My current knowledge indicates that is a boot loader error, and as you may naturally expect, i am desperate to fix it! I have tried using the advanced startup options to use the last configurations which worked and safe mode, but i get the same BSOD stop error. I placed my hard disk in another laptop and it boots fine, i have even been able to log in and use it as normal. However, when i put a hard disk running a perfectly fine copy of windows xp home to my pavillion laptop, i get the same 7B stop error.
My pavillion refuses to boot from CDs as well. It seems to me the problem isnt with my hard disk and the OS version on it, but with the remaining components on my laptop...but what could be the criminal? Would anyone be able to shed some light on my problem? Of course, I will provide more details as requested.
View 11 Replies
View Related
Oct 22, 2006
Installed and later on uninstaller a program. After that i had to restart my computer and got the following bsod: stop: 0x0000007B (0xBACC3524, 0xC0000034, 0x00000000, 0x00000000).
View 11 Replies
View Related
Aug 9, 2010
A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you seen this stop error screen, restart your computer. If this screen appears again follow these steps: Disable or uninstall any anti-virsus, disk defragmentation or back up utilities. Check your hard drive configeration, and check for any updated drivers. Run CHDSK/ F to check for hard drive corrpution, and then restart your computer. Technical Informtion: *** STOP: 0X00000024 (0X00190203, 0X86F3B848, 0XC0000102, 0X00000000)
It said all of this. I cant uninstall anything because this error comes up right after it says windows. I already tried safe mode, start from the best mode where it work and etc. It is not workin. i already tried the F8 steps, tht did not work either. and i dnt knw wat they are tlkin about when they say run CHDSK/ F. ummm yea so i need alot of help. Hopefully someone can walk me through of how to fix this. And also i do not have the window xp installtion cd or disk. I was wondering where u get tht from because when i was lookin up how u fix this problem most said u need this cd. So pretty much the basic of my problem is tht i have the BSOD and it is 0x00000024 error and i can not log on or even get to the log on part.
View 2 Replies
View Related
Mar 25, 2007
When I'm trying to start up Windows XP Home Edition I receive an error box without an error message, I can just click YES or NO. Neither option let's me continue. When starting up in Safe Mode, everything works fine.
View 2 Replies
View Related
