Installed and later on uninstaller a program. After that i had to restart my computer and got the following bsod: stop: 0x0000007B (0xBACC3524, 0xC0000034, 0x00000000, 0x00000000).
View 11 Replies
A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you seen this stop error screen, restart your computer. If this screen appears again follow these steps: Disable or uninstall any anti-virsus, disk defragmentation or back up utilities. Check your hard drive configeration, and check for any updated drivers. Run CHDSK/ F to check for hard drive corrpution, and then restart your computer. Technical Informtion: *** STOP: 0X00000024 (0X00190203, 0X86F3B848, 0XC0000102, 0X00000000)
It said all of this. I cant uninstall anything because this error comes up right after it says windows. I already tried safe mode, start from the best mode where it work and etc. It is not workin. i already tried the F8 steps, tht did not work either. and i dnt knw wat they are tlkin about when they say run CHDSK/ F. ummm yea so i need alot of help. Hopefully someone can walk me through of how to fix this. And also i do not have the window xp installtion cd or disk. I was wondering where u get tht from because when i was lookin up how u fix this problem most said u need this cd. So pretty much the basic of my problem is tht i have the BSOD and it is 0x00000024 error and i can not log on or even get to the log on part.
I get this almost everyday, I even restored the laptop to how it was out of box and it keeps crashing. Here is the error.MULTIPLE_COMPLETE_REQUESTS ***STOP: 0x00000044 (0x862df368, 0x00000D60, 0x00000000,0x00000000)
View 8 Replies View RelatedHow do you fix BSOD and Stop 0x0000007E error?
View 1 Replies View Relatedcomputer has a BSoD, Stop error 0x00000024. Many of the guides on the Internet told me to run " chkdsk drive: /f " in Cmd. The problem is that I CANT go past the BSoD to access Cmd, even in safe mode. It is a Windows XP Home Edition.
View 2 Replies View RelatedThe computer I am working on is a Compaq Presario SR1020NX running Windows XP Home Edition. It connects to the internet via a Linksys WMP54G adapter. It tried to install Windows XP SP3 and it failed. While the update was trying to work correcting the changes it made it froze so my b/f powered it off. It rebooted just fine and he was on the internet for a little bit and then it stopped working. We recycled the modem and the router, I reset everything. Tried to uninstall and reinstall the adapter and nothing worked. I contacted Linksys and we tried to use WZC to connect to no avail. After troubleshooting a little more we determined that it had to do with the updates that were just installed on the pc. The tech suggested removing all the updates that were just installed and try again. I tried...but that is where everything went heywire. I uninstalled the first update and rebooted.....then got a blue screen flash up that said autochk program not found - skipping autocheck and then went to an endless boot cycle. I couldn't boot in safe mode, tried last known good config and nothing worked.
View 2 Replies View RelatedI have a user who is getting a blue screen that references the following stop codes;
0x000000C2
0x00000000
0x80000000
I looked around but it seemed like a lot of people's issues were resolved by replacing the memory. So here is what I did;
The laptop is an HP 6710b;
- Completely replaced the memory - BSoD still happens
- CHKDSK /F - BSoD still happens
- Latest patches removed - BSoD still happens
- take hard drive out and put into a different, identical 6710b - problem resolved.
| BIOS version is the same on both laptops
An app was installed, and right after, a BSOD came up with the following error message: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Technical information: *** STOP: 0x0000008E (0xC0000005, 0xBF803EF6, 0xF70917c4, 0x00000000) *** win32ksys - Address BF 803EF6 base at BF800000, DateStamp 43446a58 Beginning dump of physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance......
I was informed today that our home computer has been freezing over the last day or so. I logged on and looked up some info on the error i was described, then perhaps fortunately, i got the vile BSOD. This is what was contained:Then it began a memory dump.It claims a device driver error, but i do not recall installing anything recently. the windows report proved less than helpful (surprise).
View 1 Replies View RelatedAs in the title, im faced with a permanent 7B BSOD stop error message on my pavillion laptop. My current knowledge indicates that is a boot loader error, and as you may naturally expect, i am desperate to fix it! I have tried using the advanced startup options to use the last configurations which worked and safe mode, but i get the same BSOD stop error. I placed my hard disk in another laptop and it boots fine, i have even been able to log in and use it as normal. However, when i put a hard disk running a perfectly fine copy of windows xp home to my pavillion laptop, i get the same 7B stop error.
My pavillion refuses to boot from CDs as well. It seems to me the problem isnt with my hard disk and the OS version on it, but with the remaining components on my laptop...but what could be the criminal? Would anyone be able to shed some light on my problem? Of course, I will provide more details as requested.
When try to open any program via the normal shortcuts, I see an error message reading Application Not Found. In order to use anything, I must go find the program on my hard drive and then choose the program responsible for running that program. I've tried creating new shortcuts, but to no avail. How can I get back to normal? I'm running Windows XP.
View 5 Replies View RelatedSTOP 0x00000050 (0x8CCC1345, 0x0000001, 0x808A65A1, 0x00000000) These both happen when installing windows, either when at 95% of copying files or when booting into windows.
View 7 Replies View RelatedSystem has been shutting down and restarting up on its own, it has done this three times, i looked back at anything new i have done recently and all the i can think of was i deleted Open Office, i received a error message saying if i delete it some programs may not operate correctly. Also i tried to delete Windows messenger Live in the the control panel under add remove windows components i deleted internet explorer by mistake and had to reinstall it. The last time it didn't shut down but i got a blue screen that said Windows has detected a software or hardware problem and has shut down to prevent damage,check any new hardware or software that have been recently installed, the error massage was " IRQL_NOT LESS_OR_ EQUAL. I am running IBM pentium 4 windows XP.
View 14 Replies View Relatedmy inlaws have a gateway with XP media on it. they told me that the machine said it was updating and going to reboot. after that it never rebooted. when they turned it on they got a reboot loop going. when i looked at the error msg it was the 7e stop error. with nothing else i did a search but just could not find anything like this. i can not boot into safe mode or normal mode. i have done a chkdsk /r /p several times but still no go. i have taken the HDD and was able to clone it with acronis to a larger drive. i put the HDD in a different pc and same thing.
View 8 Replies View RelatedI am getting a BSOD and the error says: PAGE_FAULT_IN_NONPAGED_AREA STOP: 0X00000050 (0X81000078, 0X00000000, OXF9E129BD, 0X00000002) spooldr.sys - address f9e129bd base at f9e11000, datestamp 469e788d I tested to see what drivers are not digitally signed because I read somewhere to check that and it said that the omci.sys and tcpip.sys are not digitally signed. I am testing all the hardware as we speak with PC-CHECK, the RAM seemed to pass all the tests. I can log in to safe mode and I tried restoring to a previous date and it worked for a while. I was able to uninstall the McAfee Antivirus which I thought might be the problem, but still BSOD...
View 14 Replies View RelatedMy system randomly freezes and sometimes the screen will go blank When i try and start up the system i usually get stuck on the loading screen and have to restart, or the system will freeze as i'm logging in. I get a BSoD with DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000D1 (0x000000000 0x0000000FF ) and some other 0x000stuff
View 6 Replies View RelatedI have a Acer Aspire AM5640-E5520A Intel Pentium 2 QUAD, 2.4GHz with a MCP73PV motherboard and SATA drive. When I try to install XP (which I like better than Vista) the set up acts ok ,loading files, until it gets to "setup is starting windows".. Then I get the BSOD and a message saying STOP:0x0000007b. I have tried to change the bios setting for the HD to IDE but I do not find anything about storage or AHCI. All i see is a place to change raid configuration. Raid is disabled. But i have tried it with raid being enabled.
View 3 Replies View RelatedI cannot boot to Safe Mode. Using F8 at logo display, I can select Safe Mode, but never get there. Using F12 at logo display, I can boot to Utility Partition to run Express, Extended and Symptom Tree diagnostics which include Cache, Interrupt Controller, System Memory, and HD tests WHICH ALL PASS!! The BSOD error message is: A problem has been detected and Windows has been shut down to prevent damage to your computer. Error info: Stop: 0x0000008E 0xC0000005 0xBF89066B 0xF3F5CAF0 0x00000000 Win32k.sys ADDR BF89066B base at BF800000 DateStamp 3f1487db The OS is Windows XP SP1a. Only the CPU and Monitor are connected.
View 14 Replies View RelatedWhen shutting down my laptop (Toshiba Satellite, Windows XP), I get the "end program" box that says MCCWSA will not shut down. This box stays on screen until I click end now. This is something that started recently and I can shut down by clicking the "end now" button. If I don't click the end now button the computer does not shut down. This is very annoying. It seems to have started when I cannot get online and a verizon box pops up and asks if I wish for them to check my computer. When I say yes they do and tell me everything is ok. This is a waste.
View 7 Replies View RelatedError message : stop 0xC2 or stop 0x000000C2 ,Error message says pool header has been corrupted.
View 7 Replies View RelatedEverytime i boot my comp i get the same things happening. I let windows load and get a BSOD just b4 i get to my account logon. The BSOD states: STOP: c0000218 (Registry File Failure) Registry cannot load hive (file): SystemRootSystem32ConfigSoftware or its log or alternate. Corrupt, absent, or not writable. Ive tried to work around it by using my Windows XP Home SP2 disk and booting from that but then i get stuck in the loading process of the disk saying that: aic78xx.sys is corrupt press any key to continue
View 2 Replies View RelatedWhen A windows XP SP2 start up , a error box prompt up show winlogon.exe error, I have capture the debug log , can you let me know how to solve out this problems. Also I have enclosed Hjask this log for your ref, I hope you advice how to solve out this problems.
SAFE MODE
Logfile of HijackThis v1.98.2
Scan saved at 12:42:17 AM, on 7/9/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe....
Since I've had my recent reformat and installed my newest hardware upgrade, I've experienced some random Windows crashes.So, I'm getting random and strange crashes while I'm playing games (HL2, WoW), and also BSOD's.All drivers are up to date. Oh, in addition, I've launched CPU-Z to check my setup and it was said that my ram was running at 6400 instead of 8500, why is that? CPU-Z detects that it can be runned at 1033, so the ram is fine, but when I try to change it in the bios, my CPU boots and it says "Overclocking Failed".
View 12 Replies View RelatedHow to delete a program that won't uninstall through the add or remove programs in the control panel.
Step # 1.Go to this site and download Microsofts uninstaller and run it and if the program you want to get rid of is on the list select it and remove from your computer.
Step # 2. Click on start , click on run, type regedit, and when it opens click on HKey local machine, Software, Microsoft, Windows, Current Version, click on the plus sign for uninstall and it opens all the programs installed on your computer , scroll and see if the program you want to get rid of is on the listif it is right click on it and delete it.
Step # 3. Click on start, click on run, type msconfig, and when it opens click on BOOT.INI and check the box that says, SAFE MODE. Boot the computer to safe mode and when it opens click on DRIVE C and click on program files and click on the folder of the program you want to delete from your computer and delete it. Then click on the common files folder and see if it is in there and if it is delete it. Important now, go back to click on start, click on run, type msconfig, and when it opens click on BOOT.INI and uncheck the box that says, SAFE MODE or you will boot to safe mode again.Once I remembered doing all the above steps and it still started up so I ran hijackthis and deleted the entries and it was gone for good.
I had the program "Reallusion ItsMe" and it quit working for me, so wanted to reinstall it. However, when I used Add/Remove, it gave me the message that "error installing ikernel.exe: (0 x 10000)." I thought I would remove the non-working program manually, so I deleted all the files. I then removed the entry from the registry. I did a search for anymore files with the same name and found a few and deleted those too. Well I tried to reinstall the program again and keep getting a message that there is a previous version in my system and it can't install. Geesh, what more do I have to do? There is no previous program left as far as I know, the only one left is in the Add/Remove list.
View 2 Replies View RelatedI am trying to uninstall a casino program,and when I try in Add/Remove, all I get is a window saying Could not find installation path. Uninstall aborted.I checked in the start>programs, and it's not even there. I looked in the folder,and there's no uninstall there either.I'm pretty sure there's a corrupted file or two, so I deleted the file that's associated with the game that we play, and tried to reinstall the program hoping the bad file would be replaced.
View 14 Replies View RelatedI am running Windows XP with a 40GB HD which has only 32MB free space. I installed another 80GB HD as a second (slave). How do I move some programming (applications) to the new HD without having to uninstall and reinstall?
View 6 Replies View RelatedWhen you uninstall, or in the add/remove program delete, do all the items of the program uninstall. Especially the drivers, I am having a small problem on the computer and I know its due to an unapproved windows driver installed by accident for my sandisk reader. How can you find out the drivers installed on your computer?
View 2 Replies View RelatedMy husband and I have tried to uninstall his Medal of Honor game using the control panel program change/remove with no success. Everytime we click on the icon change/remove it acts as if it's going to remove it but then it doesn't. This game has used 2,000 kb space on our computer and we are trying to free this space. Somehow the game has the icon for Wildtangent Games in the front of it and it is not part of that system. We have already removed the Wildtangent program and other Medal of Honor games successfully however, this one Medal of Honor game seems unable to be removed regardless of all our efforts. Can anyone please help us? We've done everything we know to do with no success.
View 4 Replies View RelatedI have Windows XP Home installed on my computer as my OS. Recently, I've been cleaning out my computer by uninstalling programs that I haven't used for a while. However, the uninstallation of some programs fails. For example, I have a software called JapaneseNow! (to learn Japanese) installed on my computer. However, trying to uninstall it pops up the error message that "Uninst.isu" cannot be found and therefore the uninstallation cannot continue. I already cleared off a software called SpanishNow! beforehand, which may have caused Uninst.isu to be cleared....
View 8 Replies View RelatedI recently installed Windows Live One Care on my computer. After installing it, I attempted to open it but had no success. An error message pops up and says "Windows Live One Care has encountered a problem and needs to close." It gives me the option to Send Error Report or to Not Send Error Report. This happens constantly everyime i try to open it. I can not reinstall this program because it is not listed in my Control Panel>Add or Remove Programs. Also, I tried using their (Microsoft's) uninstaller and i get this message.
View 1 Replies View Related
