It then goes into a physical memory dump, finishes, but still same BSOD.i get the same error trying to get into safe mode when trying to reformat or repairing the hard drive using my xp install disc, i get a BSOD stating that the computer has been shut down to prevent any damages and to run a scan disk.
View 14 RepliesI have a nasty virus on my desktop (I'm posting this from my laptop now) that I am trying to get rid of. However, it seems that there are a few key files that can't be removed while in normal mode. Every time I try and boot into safe mode (any of them) I get a BSOD with the stop code of 0X0000007B. Anyone know how to fix this, so I can get into safe mode and get rid of these files?
View 5 Replies View RelatedHeres the bsod message I get :line 1) stop: 0x0000007e ( 0xc0000005, 0xf894a29c, oxf8950500, oxf8950200 ) line 2) pfc.sys- address f894a29c base at f8949000, date stamp 3987f8fc
Thats it XP pro. I have the hard drive thats doing this as my slave drive now (using an old 8 gig as my master) is there any way I can find & fix this problem with the drive being my slave drive now?? It wont boot at all, not even safe mode but seems fine as a slave drive, passes chkdisk , no prob. is there a way to reinstall windows to a slave drive?? thanks guys, IM really stumped on this one.
I have a Compaq Presario that was left on overnight, connected to an unstable network. The power cord got pulled out and the battery died overnight. I plugged it back in and hit the Power button on the computer, and "Resuming Windows" appeared on the screen, but hung up. I hit the Power button again, waited about 10 seconds, and then hit the Power button a third time.
I got an error apologizing that Windows couldn't start; I had three "Safe Mode" reboot options, as well as the "Last Good Configuration" and "Normal" options. All "Safe Mode" options get to a file called "tiumflt.sys" and then goes to a quick BSOD, then tries to restart, and goes back to the error apologizing that Windows can't start. When I try "Last Good Configuration" or "Normal", I also get taken back to the BSOD. I can change boot order and go into the Phoenix BIOS...the options are the CD Drive, Floppy Drive (which I don't have), HD, or Network Adaptor. Note that the CD Drive is broken as well (has been for some time). I'm currently running the HDD Long Self Test, but the Short Test failed after about 40% complete. I did to some research, and am hoping to get some help before attempting to reset the BIOS by removing the battery from the mother board. I'l be happy to gather whatever additional information you require.
Last night I upgraded to Internet Explorer 7 from some old version (I use a different browser which is why my copy of IE was so out of date.) When I rebooted to complete the installation I got a BSOD that said IRQL_NOT_LESS_OR_EQUAL. Tried again. Same. Last known good configuration, same. Safe Mode, same. Everything I've tried, same. It's a Dell Inspiron 500m laptop running XP SP2. I'm 99.999% sure it's not a hardware problem.I can't find my XP CD and no one I know seems to have one either so a fix that doesn't require the disc would be ideal.
View 14 Replies View RelatedI cannot boot to Safe Mode. Using F8 at logo display, I can select Safe Mode, but never get there. Using F12 at logo display, I can boot to Utility Partition to run Express, Extended and Symptom Tree diagnostics which include Cache, Interrupt Controller, System Memory, and HD tests WHICH ALL PASS!! The BSOD error message is: A problem has been detected and Windows has been shut down to prevent damage to your computer. Error info: Stop: 0x0000008E 0xC0000005 0xBF89066B 0xF3F5CAF0 0x00000000 Win32k.sys ADDR BF89066B base at BF800000 DateStamp 3f1487db The OS is Windows XP SP1a. Only the CPU and Monitor are connected.
View 14 Replies View RelatedI've got a Dell Dimension 4550 running windows XP w/ SP2 and ALL the latest patches here in my shop, and I've got the weirdest problem. I wanna sweep it clean of viruses and spyware, but can't boot to safe mode. It boots completely fine in normal mode, no errors or anything. The BSOD I get is: DRIVER_IRQL_NOT _LESS_OR_EQUAL 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x00000000)
View 2 Replies View Relatedi have similar problem mentioned here URL... but the only difference is that i can use the PC normally without any problem. it gets BSOD only when i try to goto safemode by pressing f8 it says STOP 0x0000007B 0xF789E524 0xC000034 0x00000000 0x00000000
View 2 Replies View RelatedDon't know what found it's way into my PC last night but I was suddenly hit with the BSOD showing the following error:
Technical information:
*** STOP: 0x0000007E (0xc0000005, 0x87AB43B2, 0xF79AD270, 0xF79ACF6C)
Normal reboot results in the same screen and trying to boot up into sfae mode just returns me to the setup (F8) screen. So, I figured on a repair for which I've managed to get hold of an XP disc from my mother of all people.
So far I have, based on what I have found from searching the net, via the Recovery Console on the disc I have:
run chkdsk /r
followed by a reboot - no change
COPY D:i386NTLDR C:
COPY D:i386NTDETECT.COM C:
FIXBOOT
followed by a reboot - no change
FIXMBR (yes to proceed)
followed by a reboot -- no change
bootcfg /rebuild
WINDOWS XP PROFESSIONAL
/Fastdetect
Those procedures sounded pretty safe to me and I don't think I've damaged my PC any further but ...
I have a strange problem which I can't seem to rectify, I've searched around but can't find a solution. I have a Dell Demension 8400, it has 1GB RAM installed, an 80GB C: drive and I have a 250GB external USB drive (which I use for back-up, I store pictures music etc there) and I'm running Windows XP PRO with SP3+ all fixes installed.
he problem is I can NOT boot info safe mode. (I can boot normally though no problem). When I tap F8 key, I get the safe mode choices just fine (just safe mode or safe mode with networking etc) when I make a choice it starts to load then I get a BSOD with the following message/information
A problem has been detected and windows has been shutdown to prevent damage to the computer. If this is the first time you've seen this stop error screen (it's NOT it happens every safe mode boot no matter if I choose just safe mode or save mode with networking etc.)restart your computer. If this screen appears again, follow these steps:
Check for Viruses on your computer (I do always have Avira's AntiVir running and fully updated, I ran Malwarebytes, Superantispyware, and spybot search & destroy). Remove any newly installed hard drives or hard drive controllers (no new hard drives or controllers). Check your hard drive to make sure it is configured and terminated (I assume it's working I can boot into windows fine normally just NOT in safe mode). Run CHKDSK /F (I did that no problems detected) to check for hard drive corruption and then restart your computer. (the problem of course still exists)
Technical information:
***Stop: 0x0000007B (0xF7C7B524, 0xC0000034, 0x00000000, 0x00000000)"
I'm not 100% sure what to do, I really don't want to format & reinstall Windows from scratch because I have so many "things" which I use alot that I'd not want to try to replace.
Using safe mode isn't 100% essential, but there have been times in the past I needed it to remove a malware that could not be removed in normal mode.
I was just using my PC like any other day. Now I am saddened by the fact that I have a BSOD and being unable to use safe mode or trying any other solution just makes me even more sad.
Things Tried That Failed:
Safe Mode
System Recovery
Clean Install of Windows 7
Couldn't keep track of all....
An app was installed, and right after, a BSOD came up with the following error message: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Technical information: *** STOP: 0x0000008E (0xC0000005, 0xBF803EF6, 0xF70917c4, 0x00000000) *** win32ksys - Address BF 803EF6 base at BF800000, DateStamp 43446a58 Beginning dump of physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance......
I have a dell Inspiron 9100 (Intel Pentium 4 CPU 3.00GHz) desktop running Windows XP SP3 only. I have one fixed 160GB Hard Drive. I have not changed any settings/ installed/removed any programs recently. My last shut down was normal.When i started up the pc i got as far as the xp splash screen which i believe it would have stayed on indefinitely. The scroll bar was still scrolling. So I attempted restart and tried again and the same problem occurred. I then attempted to start in safe mode were the BSOD occurred at what appeared to be the end of the driver loading. I got the message unmountable_boot_volume with the error code 0x000000ED (0X869C45CO, 0XC00000BS, 0X00000000, 0X00000000).
View 1 Replies View RelatedHP Pavillion A1230n with XP Media Center edition. MOBO died a couple of months ago so replaced with ASUS M3N78-VM and 2Gb memory. System has been running great since repair until last week. Began to show signs of IE7 search engine hijack, but all scans show negative (Malwarebytes, SuperAntiSpyware, Avira, etc. Google Chrome worked okay, so problem was specific to IE. Tried to get to Safe Mode to run scans and got BSOD. System would boot "normally", but BSOD with page fault error whenever I tried to boot to Safe Mode. Replaced memory with same results. System now BSOD's on all attempted startups. safe mode, safe mode with networking, safe mode with command prompt, and normal, all with same BSOD results.
Ran Spinrite against drive with negative findings. Created new XP install on another drive and system boots fine. Cloned original boot drive to new 500Gb drive using Clonezilla and get same BSOD results with cloned drive as I did with original drive.
Tried repair install to original drive but system does not recognize new MOBO BIOS as the originator of the Restore disk
I went into MSCONFIG and checked the box to go into safe mode so i could run some virus scans and adware scans and stuff like that. Now when it gets to the desktop it has the window that says Loading Windows and then after like 2-3 min. it says password is incorrect and that i should retype it and becarefull of caps lock and stuff like that. The thing is don't have a password. It does this when i boot normally too but it lets me hit ok and hit Cancel without a password entered.
All of a sudden it tries logging me in automatically when I start up but the thing is i dont need to log in. So I try to go back into normal mode and Ican't. I hit F8 during startup and went to the Boot Normally option but it still does to safe mode. What do I do? How do I log on or how do I get rid of this password thing? One more thing, the window that tells me the password is wrong has an OK box but theres no mouse on the screen for me to click it and I can't use the keyboard to select it.
I have a dual boot linux/xp system.I was looking at partitions - just listing them - in linux, and now win xp won't come up in normal mode. It will come up in safe mode, however. Can you help me get my "normal mode" back?When the horizontal moving bar comes up in normal mode, it just goes on forever. I see the disk light go on for about 8 cycles of the bar. It usually runs 11 cycles before giving me the user selection screen. Now the disk light goes out after cycle 8, and the bar keeps going. I waited 32 cycles before giving up.
View 1 Replies View RelatedI have a Windows XP Professional Edition and i incurred a spyware virus on my PC, so i made a dumb decision by running MSCONFIG and changing my SAFEBOOT option, I did this because previously I couldn't even get into Safe Mode, it would load the files on the screen.
View 1 Replies View RelatedRecently I was playing a game when my computer froze up, when I restarted it, it froze every time on the Windows XP bootscreen. It boots fine in Safe mode with networking. (I'm typing this post on this computer)
View 2 Replies View RelatedI have a pc with Windows XP with SP2 installed. My computer has generally worked fine with little issues, but the other day Norton flagged up a virus issue. The virus was called Trojan.Patchep!inf, and couldn't be removed using Norton.Naturally, I'd have posted this in the malware removal/HJT forum, but I'm now locked out of my system.I need a way to be able to get into Windows before I can pull off any HJT logs or run any applications.The issue I have, is when Windows is loading up. I turn on my computer, and Windows boots up until the scrollbar/loading page. The computer then automatically reboots, and the cycle continues until I just hold the off button to turn off the computer. I've entered the boot menu and attempted the reboot in Safe Mode, and also tried using last working configuration. This has no effect, and still results in the constant restarting of the system.
I don't have a Windows XP disc as it was pre-installed when I bought the computer.For the time being I can boot from disc using Linux Ubuntu. I read about the virus that infected my system, which suggests that files such as winlogon are affected by the virus, which would explain my problems booting. Would it be possible to repair these files from Ubuntu, allowing me to boot the computer with Windows? I can then start a thread in the malware forum, posting HJT logs etc.
Is there any other way to boot in safe mode than F8? Windows XP is not loading properly. It is going to my background with the cursor, but nothing else. I tired to run msconfig from the task manager, but it didn't open. I want to boot in safe mode to do a system restore, but when I restart the computer, the F8 option says "to enable system configuration."
View 14 Replies View RelatedWhen I hit the F8 key, my Windows XP Pro OS takes me to the boot menu screen. I click on Safe Mode, and it scrolls with all the script, briefly, and then kicks into regular boot mode! Normally, with Safe Mode, it scrolls with the funny looking script, stays still for a few moments, and then goes into Safe Mode (after a prompt).
View 11 Replies View RelatedI was playing a video game when all of a sudden the graphics messed up, i could still hear the audio but the graphics were all messed up. About 30 seconds after this began it froze, about a minute later the blue screen of death came on with the error message 0x0000007E.When i restart my computer, the first screen is the Asus m424 MB start up screen and it lets me press delete to go into bios. If i dont go into bios, the next screen is just a black screen. It permenately stays this way. In Bios i can see the SATA hdd and all its specs, i can see the memory. My mother board does not have an onboard video slot, so since i can still see the bios with the monitor plugged in through the Video card, does this mean the Video card is still good? I think its either the mother board or the video that has been fried. Everything looks to be fine. I also tried booting from the XP disc and repairing windows, it did not work. I can also not boot up in any Safe mode at all. This includes VGA Mode, and all the Safe Modes. I get like 10 lines of .sys,
View 7 Replies View RelatedLast night while using my laptop, The screen just went black and wouldn't come back. So booted the computer, and then while booting it had weird green lines up and down the normal windows loading screen. and then when it should have booted up it just went to a weird white screen. I turned it off, tooke the battery out and let it be for awhile, and then when I went back it worked fine, until once again the screen went black. Today it won't start up without safe mode (im on it right now). I ran Spybot, Avast, Malware Bytes, bazooka and it still won't boot.Comp is a Dell Inspiron 9400, 2 GB ram, Geforce Vid card, Windows XP Pro. It was formatted a few months ago, and was running fine before this happed.
View 14 Replies View RelatedI was wondering if anyone here has come across this type of error before. My sisters laptop (Fujitsu Siemens) running on XP was working fine without any malware etc, then one morning she went to switch it on, and it would not boot up into windows xp. The screen switches on and displays the fujitsu siemens logo, then becomes unresponsive. I have tried adjusting most parameters and booting in safe mode.
However I have not had any success with this.
When booting in safe mode, I receive the following error code:
muti(0)disk(0)rdisk(0)partition(1)WINDOWSsystem32 toskrnl.exe
muti(0)disk(0)rdisk(0)partition(1)WINDOWSsystem32hal.dll
muti(0)disk(0)rdisk(0)partition(1)WINDOWSsystem32KDCOM.DLL...
I notice that BOOTVID and Drivers are both mentioned in these errors, so i am sure this is what is preventing XP from starting. The obvious thing to do would be to reboot windows from scratch, but the problem is, XP came preinstalled on the laptop, and therefore, I have no access to files necessary for a reboot. Would anyone know if this computer beyond repair, or is it possible to restore windows in some way?
i cannot boot into safe mode i go through the motions tapping f8 than it goes as far as it lets me select what option i want. i tried safe mode only and safe mode with networking and than it goes to the screen that has all the words across it and than sometimes it boots right into normal mode or it sometimes goes as far as getting into safe mode with the two signin icons on desktop my name and admin which is me too and when i click on either of them it boots right into normal mode.
View 11 Replies View RelatedI have the 'blue screen of death'but at this point, all I want to do is get into my system and move some precious photo files and document files to my external hard drive after that I can concentrate on fixing the problem (if possible).However, as I posted in another thread, I cannot start up in safe mode and so I can't even get in to do this.The blue screen appears when Windows is loading.But even if i do get to the screen where I can choose safe mode, I click on it and some files names start listing down the screen and it looks like its working, but then I'm thrown back to the blue screen.I haven't had any luck with responses to my other threads with regards to fixing the problem which leads me to believe that perhaps its a bad situation I'm in but if someone could just help me figure out the safe mode thing so I can save my kids photos and documents.
View 14 Replies View RelatedSomeone else used my pc and now when I boot up I get a blue screen.The message is inaccesible_boot_device.
I can't boot up in safe mode. It come up right after the "starting up" screen.
Wanted to run my antivirus in safe mode. F8 at reboot brought up screen with mode choices (safe mode, safe mode with connections, last time Windows functioned normally, etc. I would choose safe mode and after some blipping the files at hyperspeed at the bottom of the screen, etc.), it would come back to that mode-choice screen with a message at the top saying Windows could not boot, may have been cause by a recent change to hardware or software, etc. I could then choose "run Windows normally" and it would boot. Then I tried the msconfig way of going into safe mode, ticking the safe mode box in boot.ini. Now, because that box is ticked, it always tries to start in safe mode, but can't because of the above problem. In short, it loops me back to that mode-choice screen endlessly.
View 11 Replies View Relatedi have xp sp2 the other day zone alarm had an update, which i preformed but did not reboot at that moment. then i ran system mechanic6 total care program. then i restarted my computer. here is where my problem comes in my computer will continually goes to the screen that states in 30 seconds your system will start in normal mode(it does not) then when it did that for 5x, i tried last known 3x(it did not work),then safe mode then safe mode with network, then safe mode with command prompt.
View 14 Replies View RelatedMy computer refuses to boot into Regular Windows XP. It will boot in Safe Mode. Only recent install is SpyBot S&D. Roller Coaster Tycoon Continues to grow in size could be problem. Forgot to mention, no error message. Just continues to show the black loading screen with the XP logo.Edit again-- I have like 1000 of these .IDX files in My Documents. I just noticed them as i never use My Docs.
View 8 Replies View RelatedI was wondering if anyone could help me with a problem I have been having. My Dad's computer doesn't seem to want to start at the moment. It goes to start up, the initial screen comes up, and then the second screen that flashes up (the black screens with the white writing...I hope this is making sense!), and then after that it just beeps and then starts again.Sometimes it goes onto the screen with the options of start windows normally, start windows in safe mode, safe mode with networking etc...but none of the options work, it just restarts again with the same result.He had to borrow an XP home disc from my uncle as his computer is, well was, running that and he cannot find his own, but it wont boot from that disc. I have been into the bios to enable it to boot from disc first. He also has a back-up disc which he said had a repair function on it, and that works, yet after it apparently repairs things, there is no improvement. There isn't anything else useful on that disc. After exiting from the contents of the disc a black screen comes up with A:> I tried typing D:> but it said it was invalid. I then typed C:> and the c promt came up, but everything I tried typing such as CHKDSK returned the message 'bad command or filename'.
Does anyone have any ideas of what's going on and how to fix this? If he had his own XP disc would that work? I have heard there are programs that can force your computer to boot so you can then do a system restore or whatever, but I haven't used anything like this so I am wary of trying it, and besides that, my own computer wont burn a thing to disc or floppy (but thats a whole new post lol), so I can't get it for him, unless I am able to store it on my mp3 player, or buy the actual disc with it on.Sorry about the long post...If anyone knows if and how this can be sorted out and has a spare few minutes, I would be most grateful if you could reply.