I have this pentium 3 - 700 mhz computer which today I formatted and installed windows xp pro on it. The motherboard on the computer comes with a SIS 5598/6326 display adapter for which I been searching the internet for its WIN XP driver but havent found any except for the other versions of windows are available.What can I do if there is no WIN XP version of this driver?
View 1 RepliesI am experiencing pixelization problems. At first it would only occur at boot up or reboot. Now it is happening all the time which can be help somewhat by refresh, changing the desktop picture, and/or logging off then on I have tried, disabling the 128MB DDR ATI Radeon 9800 Pro using device manager. At first it was OK but at low resolution (VGA I think), but when it asked if I wanted to let windows manage the graphics it got garbled again. I have reset resolutions down to 800 x 600 using the graphics card but that doesn't help.
View 2 Replies View RelatedXP PRO, sp3: Was working on a friend's computer. Slaved his hard drive to my system. I put in Windows CD and hit Enter to repair an existing installation. I decided to give it a run, so I started the repair process. And of course, as soon as I did, I realized I was on the WRONG INSTALLATION (mine, which was working - not my friend's)! The operation hadn't yet started - at least according to the progress bar - and the screen said something like, "Setup is loading" or "Setup is preparing" or something like that.
View 5 Replies View RelatedI am going to install a new OS Windows XP , Home with sp2 on my computer , at least try. Now i remember that the network adaptor is one of the things i need to d/l drivers for , well i have already run into trouble i have a Intel Pro/1000 CT network adapter and can not find the driver for it.
View 7 Replies View RelatedI have problems if I try and run the display settings above 800x600. I was wondering if this would be fixed if I upgrade the firmware settings and if so where would I get these upgrades? Whenever I try and run it at a higher display setting all I get is a thing saying "Signal isnt compatible with this display setting".
View 6 Replies View RelatedI have a Gateway 7422GX which as a Mobility Radeon 9550. I repaired windows using the cd because I restarted my computer and it was either going to take 7min+ to boot, or just wasn't going to. I got stuck at the windows splash screen. I'm using windows professional. Whenever I try to install any of the drivers, I get the same error message: Setup did not find a driver compatible with your current hardware or operating system. Setup will now exit.
View 10 Replies View RelatedI would like to find a compatible upgrade,,, can I put a duo core or at least something with more punch?although this one is ok - wont run specific programs.
View 1 Replies View Relatedcan i get the driver ?
View 1 Replies View RelatedIDE to USB Adapter - need driver, I purchased a Vantec CB-IUSB20 so I could hookup a slave drive temporarily.However, I am unable to "see" the drive and the mini disk that they gave me only shows "card reader" drivers.I'm running it on a WinXP machine.I used it originally a month or so ago on another machine but no luck on this one, I've tried a Maxtor 30GB and a Seagate 200 GB.
View 8 Replies View RelatedWell, over the pas few weeks i have tried installing backtrack and ubuntu which are both linux distros and did not have any luck connecting to the internet wireless or through a cable.I reformatted the computer and reinstalled windows and still nothing.I have went to device manager and tried uninstalling and rebooting, hoping that it would fix it. Didnt work. Also i have multiple other devices with yellow question marks as there icon.
View 2 Replies View RelatedRecently, I installed the latest NVIDIA display drivers. However, I didn't uninstall my previous drivers, and when i remembered that i have to, i did...but after i had installed the latest drivers. And that's when the problem seemed to start. I looked on the Add/Remove programs list to see if the latest drivers were there, but there was nothing there. I couldn't find them on the list anywhere. So I tried reinstalling them, and when they were being installed, i got a message saying: "Windows could not load the installer for display. Contact your hardware vendor for assitsance."
View 11 Replies View RelatedMy girlfriend has an Emachines P3104 - AMD Sempron 3100+ 1.80GHz 1gig ram, xp pro sp2. At some point recently her teenage boys took it upon themselves to install a 2nd hard drive that they found in another Emachines that no longer worked. Shortly thereafter the standby button became greyed out and that function no longer worked. Then we could not get the computer to recognize or install the printer. Due to these and other various problems that accumulated over time.
View 1 Replies View RelatedAfter reinstalling XP due to some corrupted files, the software works OK now, but it does not recognize my display adapter, NVIDIA GeForce 4 MX440-8X. In the Device Manager there is no display adapter listed, and I am having trouble operating my scrolling and dragging features. NVIDIA is made by ChainTech.
View 5 Replies View RelatedI have recently gone back and redone a lot of windows. uninstalling updates and reinstalling them. I now do not have a display adapter showing up in the hardware manager. I cannot play games, and all rendereing is very slow. i have tried installing software from nvidia and the video card manufacturer. I have tried the add new hardware wizard, but nothing has worked. I have no idea what to do. I also took a graphics card from another computer and put it in mine and it did not show up either.
View 8 Replies View Relatedwhere to find MN-520 Wireless Adapter Driver?
View 1 Replies View RelatedI have bought an infrared adapter to connect to my mobile phone (MA620 USB), but unfortunately I could not install it to my computer....I know it should be Straight forward and I have followed the instructions step by step ...but all I kept getting is a massage saying that the driver for the device could not be found (even on the disk that came with the device). Iam using XP home edition sp2, and the driver on the disk is for use with xp. I have even downloaded the latest driver from the company home page .....but still got the same result.
View 2 Replies View RelatedI'm writing this from my work computer, because I've totally messed up my Dell Dimension 8250 running XP Pro).I combined my dual OS computer into only one large partition and Fdisked(wiped out my OS(s) on my primary hard drive, in an attempt to reinstall on XP OS for my computer.To make a long story as short as I can, I removed(Fdisk) and "clean installed" my XP Pro OS from Dell's XP installation disk on my unpartitioned primary hard drive, But I can NOT connect to my ISP or the internet because I lost the driver CD and can't connect to the internet to download and install then.
View 9 Replies View RelatedI want drive for net adapter device.
View 2 Replies View RelatedI reformatted a laptop and install XP for someone as they were having a lot of problems with it and I thought this would be the best way to go as alot of program stopped working. Anyway, after installing it, I still found that I couldn't installed the games he claimed were working before something went wrong and I determined it was the graphics card. I was even more sure when I noticed how poor the refresh rate was (scrolling up/down on web pages and playing games).
So I went to device manager to find out what the card was and install the latest drivers (he doesn't have the drivers for sound/video). But display adapters are not shown in device manager and I went through display -> settings -> advanced and it didn't tell me what card or driver was in there, all the information wasn't there. So any idea's as to how I can work out what card is in this laptop?
I really need help with this one. My standby mode is greyed out and on top of that it says my intel display adapters aren't working proberly in device manager. So what should i do im not really good with this tech stuff. Do i uninstall them or what because i have no idea how to get them back and i REALLY do not want to mess up my computer. Any help would be GREATLY appriciated thanks. And the intel adapter or driver came with the comp. Ive had this computer for about 9 months.
View 3 Replies View RelatedI did a silly thing today and installed Service Pack 3. It was a silly thing because it seems to have caused various small glitches with my system. I think I've sorted all of them except this last one. Before I installed SP3 my display adapter (NVidia GeForce4 Go 440 64M) inside my laptop (EASYNOTE K5305) was working fine. After the install the laptop doesn't even see it (not listed in device manager) and is running on a basic and lower resolution
View 5 Replies View RelatedI have a usb bluetooth adapter but i have no installation software. i only know the adapter no it is- ISSCBTA.
View 1 Replies View RelatedI got an infrared adapter labeled es620, i can't install it on my win xp...anybody who can give me the driver for this?
View 1 Replies View RelatedThe reason this is urgent for me is because I am leaving to move into my new apartment tomorrow morning, and once I am gone from my house, pretty much any technical problem will not get solved (I am sure many of you here are familiar with this position).My brother's computer was full of viruses so I reinstalled a fresh copy of windows, and everything is working great.But I go to install the Westell wireless G USB adapter for internet, and the driver will not install.I have installed the utility first - it then asks to connect the device which I did. The new hardware thing pops up, and since I don't have the installation CD (lost it, but downloaded the files from Westell's website), I browse to the folder of those files, and it searches and says it cannot find the driver.
View 12 Replies View RelatedI have serious doubts that reason of appearance of NetBT Error message 4311 in my Error Event Viewer is in connection with Ras Async Adapter .In Device Manager of my XP SP3 , I have yellow exclamation sign on RAS Async Adapter.When try to uninstall this driver ,received :Failed to uninstall the device.The device may be required to boot up the computer, Seems this diver is in certain way protected by the system.Strange why this happened.Normaly any driver should be free to uninstall and reinstall it, or I am wrong.
View 1 Replies View RelatedI had vista now i have changed XP but 1394 Net apater creating problem for me and it does not show any LAN signals.
View 1 Replies View RelatedThe Driver for a wireless network adapter mn-720 needed.
View 1 Replies View RelatedI purchased a wireless PCI adapter as listed above for my Windows Media Center 2005. My computer has a 2.0 GHz dual core processor and 3 GIG of RAM, 256 MB RAM Video card.
Here is my problem, when I install the software for the wireless card, it changes my Windows Login and disables the Welcome Screen. There is no drop down for users to log onto the computer, I have to type the name to login. I tried to just install the driver and my computer did not like that, it locked up twice. So I am back to installing the whole program.where I can get just a driver for this card? I searched the NetGear website and it has an updated program but no individual drivers. I tried to use WinZip to extract the exe into individual files but no luck.
I did some changes unintentionally and now my PC won't display anything after windows logo.After that the system asked me to reboot so I clicked OK.From that on my PC can boot and display windows logo but after that everything turn black.My PC is a DELL desktop run on Windows XP Home Edition Service Pack 1, how to set that back?I tried safe mode, Last Know Good, and the like but it just end up in black screen.
View 1 Replies View RelatedJust purchased a Netgear N Router. I have the router hooked up to a comcast - motorolla cable modem hardwire) , and thats working fine, but I am trying to get online with a netgear adapter - MA101, on another desktop. I purchased the adapter back in 2003, and have downloaded the up to date drivers for it on the pc, that I am not able to get online with. It is getting a very strong signal from the router, with my ntework name and everything. Been on the phone with netgear for hours, and they cannot resolve it either.
View 2 Replies View RelatedI been trying to find the driver for my integrated network card for the computer HP a1640n. I just reformatted my pc and all I want to do is install my network driver for my pc to get back online.all I know it is an integrated network adapter and all I want is to get it working again.Again I'm using windows xp pro now. since I don't have Microsoft media center edition.
View 14 Replies View Related