I reformatted a laptop and install XP for someone as they were having a lot of problems with it and I thought this would be the best way to go as alot of program stopped working. Anyway, after installing it, I still found that I couldn't installed the games he claimed were working before something went wrong and I determined it was the graphics card. I was even more sure when I noticed how poor the refresh rate was (scrolling up/down on web pages and playing games).
So I went to device manager to find out what the card was and install the latest drivers (he doesn't have the drivers for sound/video). But display adapters are not shown in device manager and I went through display -> settings -> advanced and it didn't tell me what card or driver was in there, all the information wasn't there. So any idea's as to how I can work out what card is in this laptop?
I really need help with this one. My standby mode is greyed out and on top of that it says my intel display adapters aren't working proberly in device manager. So what should i do im not really good with this tech stuff. Do i uninstall them or what because i have no idea how to get them back and i REALLY do not want to mess up my computer. Any help would be GREATLY appriciated thanks. And the intel adapter or driver came with the comp. Ive had this computer for about 9 months.
I am experiencing pixelization problems. At first it would only occur at boot up or reboot. Now it is happening all the time which can be help somewhat by refresh, changing the desktop picture, and/or logging off then on I have tried, disabling the 128MB DDR ATI Radeon 9800 Pro using device manager. At first it was OK but at low resolution (VGA I think), but when it asked if I wanted to let windows manage the graphics it got garbled again. I have reset resolutions down to 800 x 600 using the graphics card but that doesn't help.
While playing a game I hit some buttons on accident and the display shrunk. Now the monsters are small, and so is everything else outside of the game I have no idea what I did, I checked the Screen Resolution and it seems fine, and I also checked my monitor settings, which is fine.
Recently, I installed the latest NVIDIA display drivers. However, I didn't uninstall my previous drivers, and when i remembered that i have to, i did...but after i had installed the latest drivers. And that's when the problem seemed to start. I looked on the Add/Remove programs list to see if the latest drivers were there, but there was nothing there. I couldn't find them on the list anywhere. So I tried reinstalling them, and when they were being installed, i got a message saying: "Windows could not load the installer for display. Contact your hardware vendor for assitsance."
My girlfriend has an Emachines P3104 - AMD Sempron 3100+ 1.80GHz 1gig ram, xp pro sp2. At some point recently her teenage boys took it upon themselves to install a 2nd hard drive that they found in another Emachines that no longer worked. Shortly thereafter the standby button became greyed out and that function no longer worked. Then we could not get the computer to recognize or install the printer. Due to these and other various problems that accumulated over time.
After reinstalling XP due to some corrupted files, the software works OK now, but it does not recognize my display adapter, NVIDIA GeForce 4 MX440-8X. In the Device Manager there is no display adapter listed, and I am having trouble operating my scrolling and dragging features. NVIDIA is made by ChainTech.
I have recently gone back and redone a lot of windows. uninstalling updates and reinstalling them. I now do not have a display adapter showing up in the hardware manager. I cannot play games, and all rendereing is very slow. i have tried installing software from nvidia and the video card manufacturer. I have tried the add new hardware wizard, but nothing has worked. I have no idea what to do. I also took a graphics card from another computer and put it in mine and it did not show up either.
I did a silly thing today and installed Service Pack 3. It was a silly thing because it seems to have caused various small glitches with my system. I think I've sorted all of them except this last one. Before I installed SP3 my display adapter (NVidia GeForce4 Go 440 64M) inside my laptop (EASYNOTE K5305) was working fine. After the install the laptop doesn't even see it (not listed in device manager) and is running on a basic and lower resolution
XP PRO, sp3: Was working on a friend's computer. Slaved his hard drive to my system. I put in Windows CD and hit Enter to repair an existing installation. I decided to give it a run, so I started the repair process. And of course, as soon as I did, I realized I was on the WRONG INSTALLATION (mine, which was working - not my friend's)! The operation hadn't yet started - at least according to the progress bar - and the screen said something like, "Setup is loading" or "Setup is preparing" or something like that.
I did some changes unintentionally and now my PC won't display anything after windows logo.After that the system asked me to reboot so I clicked OK.From that on my PC can boot and display windows logo but after that everything turn black.My PC is a DELL desktop run on Windows XP Home Edition Service Pack 1, how to set that back?I tried safe mode, Last Know Good, and the like but it just end up in black screen.
I have this pentium 3 - 700 mhz computer which today I formatted and installed windows xp pro on it. The motherboard on the computer comes with a SIS 5598/6326 display adapter for which I been searching the internet for its WIN XP driver but havent found any except for the other versions of windows are available.What can I do if there is no WIN XP version of this driver?
I have a WD 250gb external HD, i have since switched to a mac and still want to use this HD.however there are 3 files on this drive that seem to be microsoft updates, not sure how they ended up on this drive....i did not place them there....id imagine it was thru one of the many microsoft auto updates i want to try and delete these files, but i get an error saying that i either dont have authority to delete these files , or they are currently in use. they are two folders that are 0 bytes....and have long random numeric and alpha titles such as e7e4e1d6bbb6349...etc.
XP reinstall won't validate so that I can get updates. It is a legal copy and I had no problem activating windows. However when I tried to validate it for updates it keeps telling me there is an unknown error and validation could not be completed.
My Windows Updater has stopped working. I get the following message when I try to connect to the Update site through Help and Support: "Cannot display the page The page you are trying to view cannot be displayed because the server it resides on does not respond. Please try again later." I've tried to go to several XP update pages via Google and I get similar messages. Has Microsoft changed something and not told us?
Some dell driver update that was done thorugh my automatic microsoft updates changed my display. I have tried going and changing the settings in the control panel under display, but I can't get it to look like it use to.
Have a dell xps m140, running win xp pro service pack 3. Based on your knowledge of windows xp system files and there function, i was wondering if you would know appropriate files that will need to copy. The scenario is a s follows
Got infect by a virus, virus was removed by Kaspersky. After virus removal both the 10/100 NIC and the wireless adapter, and the bluetooth have indicated that they are disconnected. However from device manager they show up as working properly, which they are not as I cannot connect to the internet and there is a red X on all three icons in the system tray. I am wondering if a system file related to network connectivity was afftected and subsequently deleted by kaspersky
video card on my laptop messed up somehow, i can see a exclamation mark on the device manager in the display drivers tab... now im searching to update my driver but cant find any sources that would suit xp windows now everything is very laggy cuz it shows im not using any video card or something like that anyway?
I have problems if I try and run the display settings above 800x600. I was wondering if this would be fixed if I upgrade the firmware settings and if so where would I get these upgrades? Whenever I try and run it at a higher display setting all I get is a thing saying "Signal isnt compatible with this display setting".
The monitor started showing graphic distortion. I ordered a new monitor but had the same distortion on it. I updated the ATI drivers but it did not solve the problem. In trying to trouble shoot the problem following directions on the ATI website, I changed all the graphic settings to the lowest and slowest available. This got rid of the distortion but the settings need to go! Now I cannot open the display settings.
My XP is currently defaulted on it's display settings 640v by 480 pixels and will not allow me to change it. In fact, there is nothing to change it to. I dont know what file I must of deleted, but is there anyway I can download the driver or something to make it so that it can be set on opitions that are higher?
All my text/font display settings seem to have changed. I downloaded a freeware program today called avi2dvd, to convert avi video files to iso files for burning to DVD. I tried it out, got frustrated with it, and uninstalled it. After I uninstalled it, I went to check my email. That's when I first noticed that all the text in my yahoo email account had changed - it seemed smaller, like it was at a lower resolution.
I clicked on a few more pages and it was the same for all of them - the text was just not as...smooth. Not as readable. And definitely smaller. It's not just a font size thing, I'm not that much of a newbie, I tried enlarging the font and it's definitely a resolution thing, not just a font or size issue. Then I tried out some other programs, and found out that the problem was system-wide. I use a writing program called Final Draft, and the text in that is also less readable.I found one program that hadn't been affected: IE all my web pages display fine in Explorer.
my mom installed a virus the other day on accident. (Some program called Dr. Spy Shreddar, or something like that.) I deleted it, but some stuff was weird with the computer. I tried restarting the system to get the old configuration back, but the virus just installed itself again. I removed it again, using instructions from Systematic Antivirus and now it's really gone. Some of the settings were still weird though. So after hours of searching the help topics on Microsoft I managed to fix 1 & 1/2 of the problems I had/have.
For one of the problems they made me go into the registry and set something to the value of 0 in order to get the desktop tab back in the Display Properties box. (You know when you right click on the desktop and select properties.) That's all fine and dandy, but here's the other 1/2 of my problem: I can't access some of the features in the tab. (I have Windows XP Professional, by the way.) I can't click inside of the background list and it's shaded a sort of brownish beige color. I also can't browse and do anything with the position setting. I can however access the customize desktop and color features
I was installing security cables for the computer stations. when I finished and rebooted the computers(had to disconnect power and other cords to run the security cables) one of them had a display problem.
it seems that the display area has been reduced. the functional area of the screen is maybe 60% of what it should be. in this area it is complete with the full desktop able to be accessed and nothing is missing. but the right 20% of the screen is solid black (cursor stops at the boundary) and the bottom 20% of the screen(that's not black) is displaying a second image of the top 20% of my desktop. (cursor also stops at this boundary.)
I reinstalled XP Pro with SP1 on my computer today. Everything is working well except when my desktop loads the actual display is about an inch to the right on the screen. If I go into properties and change/apply the screen resolution from 800 x 600 then back to 1024 x 768 it realigns and all is well. I would just prefer to not have to do that each time I restart windows.
my mom installed a virus the other day on accident. (Some program called Dr. Spy Shreddar, or something like that.) I deleted it, but some stuff was weird with the computer. I tried restarting the system to get the old configuration back, but the virus just installed itself again.For one of the problems they made me go into the registry and set something to the value of 0 in order to get the desktop tab back in the Display Properties box. (You know when you right click on the desktop and select properties.) That's all fine and dandy, but here's the other 1/2 of my problem: I can't access some of the features in the tab.
i have an icon from microsoft.saids it has updates to install for microsoft office, update service pack 3.the only thing is it won't update.and the icon won't go away until it gets updated .plus norton keeps giving me a box saids norton can't update feature.to uninstall norton than reinstall.now my son did up my whole computer so i am afraid to really touch anything.
"Install the ActiveX control required to view the website," but I don't get the bar saying to install it. None of the troubleshooting tips were relevant.
After installing and running MSE I have been unable to update definitions either manually or automatically. At the same time I noticed that microsoft automatic updates are getting to around 28 percent and then stopping - not fully downloading or installing. I cannot get through to any microsoft websites now - but all other sites are fine. wuauserv and bits are missing from services also. Have I been sneakily virused by something which MSE hasnt picked up. I tried to run malicious software removal tool - it downloads alright but wont install - says its not a valid win32 application. I correctly downloaded the 32bit app. Can anyone shed some light on any of this. I dont want to rebuild again and again.
wen i turn on my laptop it keeps goin on 3 of 3 updates but does not install updates .then turns of an repeats all over again .an wont recignise cd/reboot factory instalationhelp
