Service Pack 3 - Display Adapter Cannot Be Seen
Aug 28, 2008
I did a silly thing today and installed Service Pack 3. It was a silly thing because it seems to have caused various small glitches with my system. I think I've sorted all of them except this last one. Before I installed SP3 my display adapter (NVidia GeForce4 Go 440 64M) inside my laptop (EASYNOTE K5305) was working fine. After the install the laptop doesn't even see it (not listed in device manager) and is running on a basic and lower resolution
View 5 Replies
ADVERTISEMENT
May 2, 2007
"Internet Explorer cannot display the webpage". Most likely causes:You are not connected to the Internet. The website is encountering problems. There might be a typing error in the address. What you can try: Diagnose Connection Problems "" I diagnosed Connection Problems and this came up:Windows cannot connect to the internet using HTTP port (80), HTTPS port (443), and FTP port (21). It suggests that my firewall is at fault.
View 1 Replies
View Related
Aug 8, 2008
Once I installed sp3, I could not get past the windows loading screen, so I started in safemode and uninstalled sp3 that way. My question is, does uninstalling sp3 remove sp2 as well. I can not see sp2 under add/remove programs, but my windows update history says I downloaded sp2 last May.
View 15 Replies
View Related
Jun 1, 2006
I am experiencing pixelization problems. At first it would only occur at boot up or reboot. Now it is happening all the time which can be help somewhat by refresh, changing the desktop picture, and/or logging off then on I have tried, disabling the 128MB DDR ATI Radeon 9800 Pro using device manager. At first it was OK but at low resolution (VGA I think), but when it asked if I wanted to let windows manage the graphics it got garbled again. I have reset resolutions down to 800 x 600 using the graphics card but that doesn't help.
View 2 Replies
View Related
Nov 7, 2008
I have had Windows XP on my computer for 3 years, during that time I have had no problems with updates. A couple of days ago updates were running when I got the following message box. Service pack 3 setup. Access denied1! Microsoft will now un-install the current updates. At this point I was in a hurry to leave and shut off my computer thinking that when I started up again, the updates would resume their activity.......
View 9 Replies
View Related
May 2, 2007
Every time I try to download SP2 computer restarts during the installation, specifically when its making backup files. I got this error signature after the computer rebooted I have a Widows XP Home edition.
View 14 Replies
View Related
Feb 16, 2009
My friend just got the net however she cant use it because she needs SP2. shes on SP1 Shes using a wireless connection. she cant connect to the net to download SP2 then to SP3. so is there a way I can download it? then pass it to her via USB? Link to download?
View 14 Replies
View Related
Apr 16, 2010
ANYBODY OUT THERE KNOW HOW TO UPGRADE MY WINDOWS XP,PRO(SP1)-TO WINDOWS XP,PRO(SP2)- I,JUST NEED TO UPGRADE. I DON`T WANT TO LOSE ANY OF MY UTILITIES OR PROGRAMS THAT CAME WITH MY COMPUTER. IF ANYONE KNOWS WHERE TO GO, AND WHAT TO DO
View 2 Replies
View Related
Aug 5, 2005
Recently, I installed the latest NVIDIA display drivers. However, I didn't uninstall my previous drivers, and when i remembered that i have to, i did...but after i had installed the latest drivers. And that's when the problem seemed to start. I looked on the Add/Remove programs list to see if the latest drivers were there, but there was nothing there. I couldn't find them on the list anywhere. So I tried reinstalling them, and when they were being installed, i got a message saying: "Windows could not load the installer for display. Contact your hardware vendor for assitsance."
View 11 Replies
View Related
Dec 29, 2007
My girlfriend has an Emachines P3104 - AMD Sempron 3100+ 1.80GHz 1gig ram, xp pro sp2. At some point recently her teenage boys took it upon themselves to install a 2nd hard drive that they found in another Emachines that no longer worked. Shortly thereafter the standby button became greyed out and that function no longer worked. Then we could not get the computer to recognize or install the printer. Due to these and other various problems that accumulated over time.
View 1 Replies
View Related
Jun 24, 2005
After reinstalling XP due to some corrupted files, the software works OK now, but it does not recognize my display adapter, NVIDIA GeForce 4 MX440-8X. In the Device Manager there is no display adapter listed, and I am having trouble operating my scrolling and dragging features. NVIDIA is made by ChainTech.
View 5 Replies
View Related
Mar 19, 2006
I have recently gone back and redone a lot of windows. uninstalling updates and reinstalling them. I now do not have a display adapter showing up in the hardware manager. I cannot play games, and all rendereing is very slow. i have tried installing software from nvidia and the video card manufacturer. I have tried the add new hardware wizard, but nothing has worked. I have no idea what to do. I also took a graphics card from another computer and put it in mine and it did not show up either.
View 8 Replies
View Related
Jun 7, 2008
I reformatted a laptop and install XP for someone as they were having a lot of problems with it and I thought this would be the best way to go as alot of program stopped working. Anyway, after installing it, I still found that I couldn't installed the games he claimed were working before something went wrong and I determined it was the graphics card. I was even more sure when I noticed how poor the refresh rate was (scrolling up/down on web pages and playing games).
So I went to device manager to find out what the card was and install the latest drivers (he doesn't have the drivers for sound/video). But display adapters are not shown in device manager and I went through display -> settings -> advanced and it didn't tell me what card or driver was in there, all the information wasn't there. So any idea's as to how I can work out what card is in this laptop?
View 2 Replies
View Related
Sep 29, 2005
I really need help with this one. My standby mode is greyed out and on top of that it says my intel display adapters aren't working proberly in device manager. So what should i do im not really good with this tech stuff. Do i uninstall them or what because i have no idea how to get them back and i REALLY do not want to mess up my computer. Any help would be GREATLY appriciated thanks. And the intel adapter or driver came with the comp. Ive had this computer for about 9 months.
View 3 Replies
View Related
Jul 15, 2005
Im trying to install a LinkSys network card, and it doesn't work after I do. When I try to reinstall in device manager, the error I get is "name is already in use as either a device name or service name"I've tried all the obvious... uninstall, reinstall stuff. I know I have to play with the registry to fix this but I dont know where to start. Can anyone help me, because as of now, my mother's computer doesn't get the internet!
View 5 Replies
View Related
Nov 28, 2008
XP PRO, sp3: Was working on a friend's computer. Slaved his hard drive to my system. I put in Windows CD and hit Enter to repair an existing installation. I decided to give it a run, so I started the repair process. And of course, as soon as I did, I realized I was on the WRONG INSTALLATION (mine, which was working - not my friend's)! The operation hadn't yet started - at least according to the progress bar - and the screen said something like, "Setup is loading" or "Setup is preparing" or something like that.
View 5 Replies
View Related
Nov 25, 2006
I did some changes unintentionally and now my PC won't display anything after windows logo.After that the system asked me to reboot so I clicked OK.From that on my PC can boot and display windows logo but after that everything turn black.My PC is a DELL desktop run on Windows XP Home Edition Service Pack 1, how to set that back?I tried safe mode, Last Know Good, and the like but it just end up in black screen.
View 1 Replies
View Related
Dec 22, 2006
I have this pentium 3 - 700 mhz computer which today I formatted and installed windows xp pro on it. The motherboard on the computer comes with a SIS 5598/6326 display adapter for which I been searching the internet for its WIN XP driver but havent found any except for the other versions of windows are available.What can I do if there is no WIN XP version of this driver?
View 1 Replies
View Related
Jun 27, 2007
When i run driver parallel lines i get this error failed to create directx no supported display adapter present.edit:nevermind.
View 1 Replies
View Related
May 7, 2005
XP pro service pack 1 and I have already started in safe mode and ran Ad-aware and spybot.
View 1 Replies
View Related
May 22, 2006
If you go to Microsoft to download it it is old and it do't have all the updates. The Date Published is 08/10/2004.Is there any place to get the most updated version?
View 6 Replies
View Related
Dec 2, 2004
i have heard many good and bad things about teh new service pack and being a novice i am having a hard time trying to find a straight yes or no answer anywhere all im finding is very technical answers that i do not understand half of what people are saying
View 2 Replies
View Related
Jul 2, 2010
I have 32 bit edition and therefore need to download Service Pack as I understand Microsoft will no longer support Service Pack 2 after JULY 13.
I have tried to do it from Microsoft site but without success.Tried doing it from Service Pack center without success
View 3 Replies
View Related
Mar 19, 2010
I have a retail version of Windows XP Pro without any service packs. Where can I download SP3? I looked at Microsoft's website but it is way to confusing. I think I downloaded SP3 but it said it was meant for IT professionals to be used on a network.
View 2 Replies
View Related
Feb 13, 2009
I have service pack 3 on my desktop pc with windows xp. is it possible to downgrade to service pack, my wireless usb adapter will work on it properly, This is what I was told to do by a tech at Linksys just now, although it worked fine last night, they know they have issues with service pack 3 on xp, and have not got a driver working yet for service pack So they told me to downgrade my pc to service pack 2 until they do have a good driver
View 1 Replies
View Related
Nov 16, 2009
good day to everyone, is there anybody can teach how to downgrade SP3 to SP2
View 7 Replies
View Related
Aug 17, 2005
Is it safe for me to install Windows XP Service Pack 2?
View 14 Replies
View Related
Apr 25, 2006
I just downloaded Sevice Pack 2 and will install by myself.
View 7 Replies
View Related
Dec 1, 2008
Need some feedback on whether I should install Service Pack 3 for my Windows XP Home?
View 11 Replies
View Related
Feb 1, 2007
Do I only need to install service pack 4 only or 1,2,3 and 4, please?
View 3 Replies
View Related
Oct 31, 2007
I tried downloading service pack 2 and it messed up my computer and it takes a while to get onto it and the internet is slow. I can only use it in safe mode. Please tell me what to do, besides reboot the computer, for I have done that 2 times already.
View 6 Replies
View Related
