Microsoft Denial Of Service - Service Pack 3 Setup Access Denied
Nov 7, 2008
I have had Windows XP on my computer for 3 years, during that time I have had no problems with updates. A couple of days ago updates were running when I got the following message box. Service pack 3 setup. Access denied1! Microsoft will now un-install the current updates. At this point I was in a hurry to leave and shut off my computer thinking that when I started up again, the updates would resume their activity.......
I have tried several times to install XP SP3 on my DELL Inspiron 6000, XP SP2 and get and ?Access Denied? error. I understand that this occurs if one or more registry keys are restricted so that the software cannot alter them. I have retired installing SP3 after disabling both Zone Alarm and AVG antivirus programs w/o success. (do they need to be uninstalled?) I also understand that there is a way to reset registry and file permissions, but I am afraid that this would be beyond my comfort level. From the installation log, the first major logged failure is: 846.266: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 --- does this have any meaning. So far, these attempts have not changed the computers functionality, however, I am not able to make the restore function work.
The Service pack starts out ok, then a little way into the process it says "cannot back up update. Access is denied": with options to retry, abort or ignore. The only real option is to ignore, and it carries on. About 5 mins later the whole process aborts saying sp 2 has not installed. press ok to undo what its done, and after its done that, it says windows has been partially updated, and may not work correctly
I own a SONY VAIO desktop PC, and I'm trying to install the XP Service Pack 2. However, whenever I try to, either when prompted by Windows Automatic Update or when I do it on Microsoft's website, the installation would always pause midway and return with an "Access is Denied" dialogue box. Microsoft's website had something regarding this issue --http://support.microsoft.com/kb/873148 -- but under Step 2, I couldn't find any specific registry key that resembled the one that was given Quote: The found entry in the Setupapi.log file should be similar to the following example: #-007 Deleting registry key HKCRvnd.ms.radio #E033 Error 5: Access is denied. This is what I see in the setupapi.log text file:
Code: #E008 Setting registry value HKLMSYSTEMCurrentControlSetServicesssdpsrv\DependOnService#E033 Error 5: Access is denied.#E065 Parsing AddReg section [Product.Add.Reg]......................
I checked the setup api and found access denied on HKCRvnd.ms.radio, I removed all instances of this, cause I saw another post with the same problem and that seem to work for them. I also had an access denied for
c:windowssoftwaredistributiondownload16b2c96a0c41f4dfdb4d3cc228a4f819u pdateupdate.inf so I gave it permissions for everything. Still seem to be having problems trying to install service pack 2. And looking at the setupapi still seems to give me the same error messages even though I made the changes.
I just tried installing Service Pack 2 on my XP, and I downloaded it and during installation it stops and simply says "Access Denied" in a little prompt, then says that installation has failed.
I finally decided to install the service pack 2. During the install I keep getting messages of the form: Service pack 2 could not back up registry key XXXXX to file c:windows$NtServicePackUninstall$ eg00013: Access is denied. Anyone knows what the problem might be? I located the directory and it does get removed when I cancel the update. I'm running as an administrator.
i just recently bought a new ipod and i need to install itunes but first I have to update my windows xp to service pack 2 or higher everytime I try i get the install halfway then the access denied message pops up. I tried the various solutions i found on google and its still doing it, I even d/led registry mechanic and clean and repair all my registry and its still doing access denied error.
I just bought the new GTA 4 and it apperently needs service pack 3, so i downloaded it from microsoft download center but in the middle of the install it stops and says access denied. It then continues to remove the service pack again and when it is almost done it said that it ways not removed corretly and that XP might not work optimatly.
When i try to update to service pack 2 I get an error that says Access denied and then stops the update. I used the windows knowledge base for help http://support.microsoft.com/kb/873148 I do what they say but I get to the point Where i reset the permission for Hkey_classes_rootDxDiagprovider But it gives me an error "You do not have permission to view the current permission settings for DxDiag.DxDiagprovider, but you can make permission changes." After that it comes to the permission editor but i am unable to make changes
I seem to be having trouble with both of my PC's (dell dim 2400's with XP home) accessing the Windows Update site. I can never get on and get the usual page suggesting to try later or try downloading manually, which I can't do either. None of my System Restore points work (on either one)! Also, our DSL connection is working fine, as for as IE6 goes. (I can get Google, Yahoo, Bestbuy.com, ect.) I can't access the msn web-site either and Outlook Express 2003 hangs during the receiving part. I've tried Trend-Micro's Housecall and it cleaned several trojans, but I still have the same problems. I've never experienced this "Denial of Service" attacks.
I start up my computer, I get this message pop up: Fatal Execution Engine Error (0x7929f276) By accident, I went to my control panel and clicked on Administrative tools, and clicked on the Micrsoft.Net Framework 1.1 Configuration and got this same error message: Fatal Execution Engine Error (0x7929f276) so how do I get rid of it then? I went online and found out that I needed to go to my Add/Remove Programs and put a check mark next to the "Show Updates" which makes it show all of the Microsoft .Net Framework stuff. I did that, and managed to remove the Service Pack 3. BUT when I tried to remove all of the Service Pack 1 it said something like that "something is already in the process of installing, please wait till it gets done"
Microsoft made any announcements about whether they will release a Service Pack 3 for Windows XP this year? If so, I haven't heard anything, and Microsoft service packs usually generate a lot of media attention. I thought perhaps Microsoft would bundle SP3 with the upcoming Internet Explorer 7. If there is no SP3 on the horizon, I suppose Internet Explorer 7 will be released by itself.
I'm running the Home Edition Version 2002 and ever since I downloaded Service Pack 3, I have had nothing but BIG PROBLEMS. Is SP3 compatible with this version or should I still be useing SP2. I've slowed considerably, jumping, lagging, skipping.
I have MS XP HE SP3. Try as I may, I cannot install Microsoft .NET Framework 3.5 Service Pack 1. I need this to install Paint.NET. I have MS Framework 2.0 installed, and this Update is directly from MS Updates. The only message I get after trying to install is: Installation was unsuccessful. I have tried ending any unnecessary Processes through Task Manager, but to no avail
I did a full HP system restore and the Computer guy who came to my house installed the Service Pack 3, the latest version. I used to have Service Pack 1. I have had quite a few problems since then because of the full system restore and having to re-install alot of my programs, etc. But anyway I noticed today, that down in my system tray (or whatever you call it) on the bottom right of my computer where all the little icons are, there is this Microsoft Updates Automatic Updater with the yellow shield and it said that an update ready to install so I tried installing it. And this is what it said:
Automatic Updates Some updates could not be installed The following updates were not installed: Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86 ....SO- that seems like a conflict since my computer had Service Pack 3 and the Microsoft Updates is trying to install this Service Pack 1 thing. What should I do? Do I have to get it all in sync somehow and is this messing up things on my computer? Also does this mean I am missing out on all the correct updates for my computer?
My XP Pro (and firewall) at home is configured to allow Remote Desktops and my wife and I alternate connecting to it over the internet. Since recently I've started experiencing denial of service that manifests by a black creen when the RDP client connects. Logging on on the console usually resets the issue. The eventviewer has error messages from TERMDD and termserv that invalid packet was received and the client was disconnected.
Note that the client is not disconnected: it just shows a black screen for ever and never disconnects until I disconnect it. I searched msft for black screen and RDP and saw that this symptom could happen if an intermediate router drops large packets and the suggestion was to reduce the MTU size. Now I've noticed that I usually experience the denial of service after my wife tries to connect. It appears at her work they've done something to disable or rather screw up the outbound RDP connections. Now, she's no longer trying to connect, but I thought that this might be a vulnerabilty and a malicious user could lock me out of my computer until I get home to reset it. Note that I have Windows Auto Update ON and therefore have all public hotfixes continuously installed. Is there a known denial of service issue like that and is there anything I could do to protect my computer (short of disabling RDP access)?
Once I installed sp3, I could not get past the windows loading screen, so I started in safemode and uninstalled sp3 that way. My question is, does uninstalling sp3 remove sp2 as well. I can not see sp2 under add/remove programs, but my windows update history says I downloaded sp2 last May.
well im havin trouble reaching my control panel.when i try to access it, it loads up then closes it automatically and my whole desktop is gone,and justs shows my wallpaper.but in a lil while it comes back.everytime i try to access it, it wont let me and it justs closes and does it over again.also my other problem is that i can't install my service pack 2 it says that it has been "terminated" or sumthin like that.and when i keep on doing it and still says even in safe mode.so u guys know what problem lies here?
I have only one account on my Windows and it is the administrator account (mine because I'm the only one using the computer). The problem is when I make changes in msconfig, when I click on Apply, I get this message "An Access Denied error was returned while attempting to change a service.You may need to log on using an Administrator account to make the specified changes".I am the administrator and there is no other account than mine!
I just formated my PC two nights ago and I am still trying to get all the updates done. However, when I try to update to Service Pack 3, I get an error halfway through that says "Acces Is Denied", and then it starts to undo everything the Service Pack was updating. I have tried downloading the service pack file from microsoft, rebooting and turning off all anti-virus. ect. I have seen methods that tell me to reset the registry and file permissions. Is this safe? And also, has anyone else had this problem and fixed it.
Recently I've been trying to install XP SP2 on a system that was recovered using an XP upgrade disc that only had SP1. The setup program gets through backing up, creating a restore point and so on, but during the actual file installation process, an error causes setup to abort and undo all changes made (rollback). "Service Pack 2 Setup Error." is the title bar, and "The system cannot find the path specified." is the message, the only option is to click ok, which opens the XP SP2 uninstall wizard. I've tried using Subinacl to reset security settings, tried installing in both safe and normal modes, used chkdsk /r and /p and tried installing again, and each time got the same message.
I have Win XP Home Edition, my computer crashed last night and I had to re-install windows. I've been installing all my window updates but I keep getting an error for Service Pack 1. "The core system file (kernel) used to this computer is not a Microsoft Windows file." And Service Pack 2 has been trying to download to my D drive, which is an external hard drive.
Every time I try to download SP2 computer restarts during the installation, specifically when its making backup files. I got this error signature after the computer rebooted I have a Widows XP Home edition.
My friend just got the net however she cant use it because she needs SP2. shes on SP1 Shes using a wireless connection. she cant connect to the net to download SP2 then to SP3. so is there a way I can download it? then pass it to her via USB? Link to download?
ANYBODY OUT THERE KNOW HOW TO UPGRADE MY WINDOWS XP,PRO(SP1)-TO WINDOWS XP,PRO(SP2)- I,JUST NEED TO UPGRADE. I DON`T WANT TO LOSE ANY OF MY UTILITIES OR PROGRAMS THAT CAME WITH MY COMPUTER. IF ANYONE KNOWS WHERE TO GO, AND WHAT TO DO
i have an icon from microsoft.saids it has updates to install for microsoft office, update service pack 3.the only thing is it won't update.and the icon won't go away until it gets updated .plus norton keeps giving me a box saids norton can't update feature.to uninstall norton than reinstall.now my son did up my whole computer so i am afraid to really touch anything.
