Cant Access Control Panel And Cannot Install Xp SErvice Pack 2
Sep 18, 2005
well im havin trouble reaching my control panel.when i try to access it, it loads up then closes it automatically and my whole desktop is gone,and justs shows my wallpaper.but in a lil while it comes back.everytime i try to access it, it wont let me and it justs closes and does it over again.also my other problem is that i can't install my service pack 2 it says that it has been "terminated" or sumthin like that.and when i keep on doing it and still says even in safe mode.so u guys know what problem lies here?
View 2 Replies
ADVERTISEMENT
Oct 31, 2009
I have tried several times to install XP SP3 on my DELL Inspiron 6000, XP SP2 and get and ?Access Denied? error. I understand that this occurs if one or more registry keys are restricted so that the software cannot alter them. I have retired installing SP3 after disabling both Zone Alarm and AVG antivirus programs w/o success. (do they need to be uninstalled?) I also understand that there is a way to reset registry and file permissions, but I am afraid that this would be beyond my comfort level. From the installation log, the first major logged failure is: 846.266: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 --- does this have any meaning. So far, these attempts have not changed the computers functionality, however, I am not able to make the restore function work.
View 11 Replies
View Related
Oct 5, 2007
I checked the setup api and found access denied on HKCRvnd.ms.radio, I removed all instances of this, cause I saw another post with the same problem and that seem to work for them. I also had an access denied for
c:windowssoftwaredistributiondownload16b2c96a0c41f4dfdb4d3cc228a4f819u pdateupdate.inf so I gave it permissions for everything. Still seem to be having problems trying to install service pack 2. And looking at the setupapi still seems to give me the same error messages even though I made the changes.
View 8 Replies
View Related
Feb 18, 2006
I've done a lot of searching around, and have found that my problem has occured rarely, but never have I been able to find an answer.As you are well aware, several older computers have compatibility issues with SP2. Mine is one of them. However, it has SP2 installed.The solution is obviously to remove SP2. However, if I go through the normal means of doing this (Add/Remove Program under the Control Panel, or using the run command listed in Microsoft's website), I get this strange error:"Bosnian (Latin, Bosnia and Herzegovina) is selected as the language for standards and forms, or for non-Unicode programs. This language is not supported prior to Windows XP Service Pack 2. Please see readmesp.htm to select a different language."
View 11 Replies
View Related
Nov 7, 2008
I have had Windows XP on my computer for 3 years, during that time I have had no problems with updates. A couple of days ago updates were running when I got the following message box. Service pack 3 setup. Access denied1! Microsoft will now un-install the current updates. At this point I was in a hurry to leave and shut off my computer thinking that when I started up again, the updates would resume their activity.......
View 9 Replies
View Related
May 21, 2005
Since installing Service Pack 2, whenever switching on my computer the message "The requested control is not valid for this service". The message disappears when I click on "OK" but I would like to know how to prevent it appearing and just what "the required control"
View 5 Replies
View Related
Sep 25, 2007
I keep getting what I believe is a fake windows security alert, which reads: Warning! Potential Spyware Operation! Your computer is making unauthorized copies of your system and Internet files. I cannot access Control Panel. Cannot print and the computer does not recognize me as the administrator.
View 13 Replies
View Related
May 11, 2005
i have a 8 month old computer with 512Mb RAM 3Ghz intel P4 processer and a 160Gb hard drive. basically i think there are missing system files because my computer has slowed right down when opening folders / applications and i cannot access the control panel (it says windows explorer has had to close). i run the free AVG virus scanner, Zone Alarm firewall and the AOL spyware protection.
Logfile of HijackThis v1.99.1
Scan saved at 15:44:21, on 11/05/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe
C:WINDOWSsystem32Ati2evxx.exe............
View 14 Replies
View Related
Nov 1, 2006
I am unable to access anything in my Control Panel, I am getting the error message: Windows cannot find 'C:WINDOWSsystem32rundll32.exe'. make sure you typed the name correctly?
View 11 Replies
View Related
Jan 9, 2009
Sparing all of you the gory details,I can not access I.O. from the control panel.The icon is there but when i click, it flashes very fast and wont open.
View 14 Replies
View Related
Jun 3, 2006
The folder options seem to have vanished from my control panel n nothin that i do can help me access my hidden files.
View 3 Replies
View Related
Oct 25, 2006
how to install IIS with an executable instead of going to control panel, add remove programs, windows compents. I want to add it to a batch file that I run to install applications. I would just add it to the XP Install build script but I dont want it on every machine.
View 2 Replies
View Related
Sep 10, 2007
I've seen similar recent threads opened detailing similar problems you've looked into. My control panel icon has vanished from my start menu, the link to it in My Computer has gone too and when I try to access it via the Run function using control.exe I am greeted with the message of "This operation has been canceled due to restrictions in effect on this computer, please contact your administrator".I'm sure this is a malware problem I've picked up off the web but I've got no idea of how to fix the problem. Your help would be very gratefully received.
View 5 Replies
View Related
Jul 18, 2005
The Service pack starts out ok, then a little way into the process it says "cannot back up update. Access is denied": with options to retry, abort or ignore. The only real option is to ignore, and it carries on. About 5 mins later the whole process aborts saying sp 2 has not installed. press ok to undo what its done, and after its done that, it says windows has been partially updated, and may not work correctly
View 2 Replies
View Related
Nov 13, 2007
The title pretty much sums it up, I can't update to the new service pack, a window pops up and says "Access is denied". What do I do now?
View 3 Replies
View Related
Sep 9, 2007
I own a SONY VAIO desktop PC, and I'm trying to install the XP Service Pack 2. However, whenever I try to, either when prompted by Windows Automatic Update or when I do it on Microsoft's website, the installation would always pause midway and return with an "Access is Denied" dialogue box. Microsoft's website had something regarding this issue --http://support.microsoft.com/kb/873148 -- but under Step 2, I couldn't find any specific registry key that resembled the one that was given Quote: The found entry in the Setupapi.log file should be similar to the following example: #-007 Deleting registry key HKCRvnd.ms.radio #E033 Error 5: Access is denied. This is what I see in the setupapi.log text file:
Code: #E008 Setting registry value HKLMSYSTEMCurrentControlSetServicesssdpsrv\DependOnService#E033 Error 5: Access is denied.#E065 Parsing AddReg section [Product.Add.Reg]......................
View 14 Replies
View Related
Apr 15, 2005
I just tried installing Service Pack 2 on my XP, and I downloaded it and during installation it stops and simply says "Access Denied" in a little prompt, then says that installation has failed.
View 1 Replies
View Related
Sep 17, 2005
I finally decided to install the service pack 2. During the install I keep getting messages of the form: Service pack 2 could not back up registry key
XXXXX to file c:windows$NtServicePackUninstall$ eg00013: Access is denied. Anyone knows what the problem might be? I located the directory and it does get removed when I cancel the update. I'm running as an administrator.
View 5 Replies
View Related
Nov 5, 2008
i just recently bought a new ipod and i need to install itunes but first I have to update my windows xp to service pack 2 or higher everytime I try i get the install halfway then the access denied message pops up. I tried the various solutions i found on google and its still doing it, I even d/led registry mechanic and clean and repair all my registry and its still doing access denied error.
View 14 Replies
View Related
Dec 5, 2008
I just bought the new GTA 4 and it apperently needs service pack 3, so i downloaded it from microsoft download center but in the middle of the install it stops and says access denied. It then continues to remove the service pack again and when it is almost done it said that it ways not removed corretly and that XP might not work optimatly.
View 1 Replies
View Related
Apr 25, 2006
I just downloaded Sevice Pack 2 and will install by myself.
View 7 Replies
View Related
Dec 1, 2008
Need some feedback on whether I should install Service Pack 3 for my Windows XP Home?
View 11 Replies
View Related
Feb 1, 2007
Do I only need to install service pack 4 only or 1,2,3 and 4, please?
View 3 Replies
View Related
Feb 23, 2007
I am unable to install windows xp service pack 2. I have downloaded it and it gets to final stages of instalation (performing cleaning) and then I get an error message saying that it could not complete installation. I have a proper copy of win xp and have used it for ages and registered it. The problems came when I got a new motherboard and it asked me to register windows which I did successfully. When I went to download SP2 it told me I had to register windows and to follow certain steps in the control panel.
View 1 Replies
View Related
May 6, 2006
I never installed Windows Service pack 2 on my computer yet. Do I really need this installed? Also, do I have to shut down any programs before installing it?
View 6 Replies
View Related
Dec 21, 2005
All my processes are set to manual or automatic
I have all previous updates.
I have scanned for viruses and spyware with 2 scanners for each.
When trying to install SP2, it gets exactly halfway then it says access denied.
View 7 Replies
View Related
May 27, 2006
When i try to update to service pack 2 I get an error that says Access denied and then stops the update. I used the windows knowledge base for help http://support.microsoft.com/kb/873148 I do what they say but I get to the point Where i reset the permission for Hkey_classes_rootDxDiagprovider But it gives me an error "You do not have permission to view the current permission settings for DxDiag.DxDiagprovider, but you can make permission changes." After that it comes to the permission editor but i am unable to make changes
View 6 Replies
View Related
Mar 14, 2010
After even using Microsoft's "Fix It" and Diagnostic tools,I get an automated e-mail
"Your ID seems to have expired or you have already completed this process before.Contact your support engineer so they can guide you through the appropriate next steps"
View 4 Replies
View Related
Dec 31, 2006
I went through Microsoft Update to get the latest updates for a PC that only has SP1 installed (and was missing 50 Critical Updates to boot). After I installed the 50 CUs the next time I logged into Microsoft Update I was prompted to download SP2. Everything went well until the Registry backup portion of the SP2 installation routine.
About 6 registry entries couldn't be backed up. I ignored them and tried to proceed but SP2 eventually came to a stop where my only option was to choose 'OK' and it began to undo whatever changes it had done.
I shut down every startup item using CodeStuff's Starter prior to this update. There is no AV running or anything else. Microsoft Update didn't work originally so I reregistered a couple of .dlls
View 10 Replies
View Related
Aug 28, 2005
trying to update and install Net Framework 1.0 Service Pack 3 I get following message: " Application has generated an exception that could not be handled. Process id:0xf7c (3964), Thread id=0x40c (1036). "
View 1 Replies
View Related
Apr 13, 2008
I have tried to install this dozens of times, and automatic updates keeps downloading it over and over again, but "Microsoft .NET Framework 2.0 Service Pack 1 (KB110806)" always fails to install. I am forced to turn of XP automatic updates.
View 1 Replies
View Related
