I just tried installing Service Pack 2 on my XP, and I downloaded it and during installation it stops and simply says "Access Denied" in a little prompt, then says that installation has failed.
View 1 RepliesAll my processes are set to manual or automatic
I have all previous updates.
I have scanned for viruses and spyware with 2 scanners for each.
When trying to install SP2, it gets exactly halfway then it says access denied.
I have had Windows XP on my computer for 3 years, during that time I have had no problems with updates. A couple of days ago updates were running when I got the following message box. Service pack 3 setup. Access denied1! Microsoft will now un-install the current updates. At this point I was in a hurry to leave and shut off my computer thinking that when I started up again, the updates would resume their activity.......
View 9 Replies View RelatedThe Service pack starts out ok, then a little way into the process it says "cannot back up update. Access is denied": with options to retry, abort or ignore. The only real option is to ignore, and it carries on. About 5 mins later the whole process aborts saying sp 2 has not installed. press ok to undo what its done, and after its done that, it says windows has been partially updated, and may not work correctly
View 2 Replies View RelatedThe title pretty much sums it up, I can't update to the new service pack, a window pops up and says "Access is denied". What do I do now?
View 3 Replies View RelatedI own a SONY VAIO desktop PC, and I'm trying to install the XP Service Pack 2. However, whenever I try to, either when prompted by Windows Automatic Update or when I do it on Microsoft's website, the installation would always pause midway and return with an "Access is Denied" dialogue box. Microsoft's website had something regarding this issue --http://support.microsoft.com/kb/873148 -- but under Step 2, I couldn't find any specific registry key that resembled the one that was given Quote: The found entry in the Setupapi.log file should be similar to the following example: #-007 Deleting registry key HKCRvnd.ms.radio #E033 Error 5: Access is denied. This is what I see in the setupapi.log text file:
Code: #E008 Setting registry value HKLMSYSTEMCurrentControlSetServicesssdpsrv\DependOnService#E033 Error 5: Access is denied.#E065 Parsing AddReg section [Product.Add.Reg]......................
I am trying to install USB serial bus controllers so as to run Tata Photon+ modem, but it shows "Access Denied and Installation failed" message. I have Administrtor permissions.
View 1 Replies View RelatedI checked the setup api and found access denied on HKCRvnd.ms.radio, I removed all instances of this, cause I saw another post with the same problem and that seem to work for them. I also had an access denied for
c:windowssoftwaredistributiondownload16b2c96a0c41f4dfdb4d3cc228a4f819u pdateupdate.inf so I gave it permissions for everything. Still seem to be having problems trying to install service pack 2. And looking at the setupapi still seems to give me the same error messages even though I made the changes.
I finally decided to install the service pack 2. During the install I keep getting messages of the form: Service pack 2 could not back up registry key
XXXXX to file c:windows$NtServicePackUninstall$ eg00013: Access is denied. Anyone knows what the problem might be? I located the directory and it does get removed when I cancel the update. I'm running as an administrator.
i just recently bought a new ipod and i need to install itunes but first I have to update my windows xp to service pack 2 or higher everytime I try i get the install halfway then the access denied message pops up. I tried the various solutions i found on google and its still doing it, I even d/led registry mechanic and clean and repair all my registry and its still doing access denied error.
View 14 Replies View RelatedI just bought the new GTA 4 and it apperently needs service pack 3, so i downloaded it from microsoft download center but in the middle of the install it stops and says access denied. It then continues to remove the service pack again and when it is almost done it said that it ways not removed corretly and that XP might not work optimatly.
View 1 Replies View RelatedWhen i try to update to service pack 2 I get an error that says Access denied and then stops the update. I used the windows knowledge base for help http://support.microsoft.com/kb/873148 I do what they say but I get to the point Where i reset the permission for Hkey_classes_rootDxDiagprovider But it gives me an error "You do not have permission to view the current permission settings for DxDiag.DxDiagprovider, but you can make permission changes." After that it comes to the permission editor but i am unable to make changes
View 6 Replies View Relatedwhy window xp service pack 3 start installing and its like 75% done and a little one pops up denied and starts to undo what it started window xp
View 6 Replies View RelatedI keep trying to install the update Microsoft .NET Framework 1.1 Service Pack 1. It continues to tell me that it has failed to install.
View 4 Replies View RelatedI can't seem to get the servioce pack to install itself onto my computer.The installer loads and gets 1/4 of it done, then the rest of it fails.
View 1 Replies View Relatedwhen i try to update and download Office XP Service Pack 3, a screen pops up saying that the feature i wana use is on the Microsoft Office Standard CD rom...but i don't have the CD, the Office was preinstalled...now i can't finish the update because it will abort after there's no correct CD rom in the drive.
View 2 Replies View RelatedI am about to download and install XP Service Pack 2. When I attempted to do this when SP2 first came out, my computer slowed almost to a standstill and I uninstalled it.
View 4 Replies View RelatedI haven't installed anything new recently except for windows updates. (College makes us install them.) Yesterday after a reboot, my system started acting strangely for no apparent reason. I have the following problems: System Restore opens to a blank page Help Center doesn't load at all windows won't minimize to the taskbar windows media player gives the error "can't perform operation, low memory" word gives the error "this document could not be registered. It will not be possible to create links from other documents to this document." Otherwise word functions properly.
copy/paste doesn't work dragging files/folders on the desktop and in windows explorer doesn't work When I try to view 'properties' of errors in the event log, nothing happens. I also noted that I started getting a lot of Event 4609 after these problems sprang up, when I hadn't been getting any previously. I also noted that my running processes are about 6 fewer than they were before I encountered this problem. Additionally, I am unable to start in safe mode. Pressing f8 produces no results. Everything else seems to work fine. So the system works, but is obviously in a crippled state, for no apparent reason. I'd rather not have to reinstall the os because I don't have a cd at the moment.
i'm having this problem with service pack 3 installation.i'm running windows xp home with service pack 2. A balloon just came up the other day wanting to install service pack 3. I should say it was an update balloon. I would let it begin installation but after about 20 min. I would get this service pack 3 setup error box.Service pack 3 installation did not complete.Select ok to undo the changes that have been made.I would let it undo the changes but everytime that i booted up i would get this update balloon. What do i do?
View 14 Replies View RelatedI have tried several times to install XP SP3 on my DELL Inspiron 6000, XP SP2 and get and ?Access Denied? error. I understand that this occurs if one or more registry keys are restricted so that the software cannot alter them. I have retired installing SP3 after disabling both Zone Alarm and AVG antivirus programs w/o success. (do they need to be uninstalled?) I also understand that there is a way to reset registry and file permissions, but I am afraid that this would be beyond my comfort level. From the installation log, the first major logged failure is: 846.266: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 --- does this have any meaning. So far, these attempts have not changed the computers functionality, however, I am not able to make the restore function work.
View 11 Replies View RelatedI cannot install .NET Framework 1.1 (which I need for several programs). I've tried for weeks to find a fix, but can't. It says ACCESS IS DENIED, PLEASE VERIFY THAT YOU HAVE ACCESS TO THAT DIRECTORY.error 1304 error writing to file c:windowsmicrosoft.netframeworkv1.1.43221033vsavb7rtui.dll verify that you have access to that directory.I am running on admin, and I have Windows XP Home Edition.I've also tried to install .NET 2.0, but also got an error.
View 6 Replies View Relatedwell im havin trouble reaching my control panel.when i try to access it, it loads up then closes it automatically and my whole desktop is gone,and justs shows my wallpaper.but in a lil while it comes back.everytime i try to access it, it wont let me and it justs closes and does it over again.also my other problem is that i can't install my service pack 2 it says that it has been "terminated" or sumthin like that.and when i keep on doing it and still says even in safe mode.so u guys know what problem lies here?
View 2 Replies View RelatedI just formated my PC two nights ago and I am still trying to get all the updates done. However, when I try to update to Service Pack 3, I get an error halfway through that says "Acces Is Denied", and then it starts to undo everything the Service Pack was updating. I have tried downloading the service pack file from microsoft, rebooting and turning off all anti-virus. ect. I have seen methods that tell me to reset the registry and file permissions. Is this safe? And also, has anyone else had this problem and fixed it.
View 2 Replies View RelatedThe entire error msg is:
An access denied error was returned while attempting to change a service.You may need to log on using an Administrator account to make the changes.
The only account on the system is mine that is an administrator account but i still get this error.
I have only one account on my Windows and it is the administrator account (mine because I'm the only one using the computer). The problem is when I make changes in msconfig, when I click on Apply, I get this message "An Access Denied error was returned while attempting to change a service.You may need to log on using an Administrator account to make the specified changes".I am the administrator and there is no other account than mine!
View 14 Replies View RelatedI have been trying to install service pack 3 and failed.
About halfway through the installation (according to the progress bar) I get a dialogue box saying <Access denied click OK to cancel>. There are no other options available. Clicking on OK reverses everything done to that point and puts me back to the beginning.
There is nothing to indicate what access is denied or which program/setting is doing the denying.
Decided to update my XP installation with the XP2 upgrade. Everything was sailing smoothly until the upgrade halted with an "Access Denied" message. Luckily it deinstalled and reloaded the original XP1 installation successfully - I don't see any problems! If I look at the current setupapi.log, I see several pages of #E197 errors towards the end of the update (the description says, "Writing "C:WINDOWSINF etwzc.inf" to "C:WINDOWSINF" is not an approved method of installing INF files. Use a 'CopyINF' entry instead". Then I see the following:
#-007 Deleting registry key HKCR.AudioCD
#E033 Error 5: Access is denied.
#E065 Parsing DelReg section [Product.Del.Reg] in "c:windowssoftwaredistributiondownload16b2c96a0c41f4dfdb4d3cc228a4f819 updateupdate.inf" failed. Error 5: Access is denied...............
Windows XP SP2 will begin installation, but about midway through the install,
installation stops with the same error message. The error message is (access
denied). I have tried countless times to install this update using automatic updates as well as using the CD, all with negative results I'm about ready to update my operating system to XP Professional, I have XP Home Edition. Before installation I followed all the preperation instructionsfound on the Windows website.
Once I installed sp3, I could not get past the windows loading screen, so I started in safemode and uninstalled sp3 that way. My question is, does uninstalling sp3 remove sp2 as well. I can not see sp2 under add/remove programs, but my windows update history says I downloaded sp2 last May.
View 15 Replies View RelatedEvery time I try to download SP2 computer restarts during the installation, specifically when its making backup files. I got this error signature after the computer rebooted I have a Widows XP Home edition.
View 14 Replies View RelatedMy friend just got the net however she cant use it because she needs SP2. shes on SP1 Shes using a wireless connection. she cant connect to the net to download SP2 then to SP3. so is there a way I can download it? then pass it to her via USB? Link to download?
View 14 Replies View Related