I have MS XP HE SP3. Try as I may, I cannot install Microsoft .NET Framework 3.5 Service Pack 1. I need this to install Paint.NET. I have MS Framework 2.0 installed, and this Update is directly from MS Updates. The only message I get after trying to install is: Installation was unsuccessful. I have tried ending any unnecessary Processes through Task Manager, but to no avail
View 2 RepliesI did a full HP system restore and the Computer guy who came to my house installed the Service Pack 3, the latest version. I used to have Service Pack 1. I have had quite a few problems since then because of the full system restore and having to re-install alot of my programs, etc. But anyway I noticed today, that down in my system tray (or whatever you call it) on the bottom right of my computer where all the little icons are, there is this Microsoft Updates Automatic Updater with the yellow shield and it said that an update ready to install so I tried installing it. And this is what it said:
Automatic Updates Some updates could not be installed The following updates were not installed: Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86 ....SO- that seems like a conflict since my computer had Service Pack 3 and the Microsoft Updates is trying to install this Service Pack 1 thing. What should I do? Do I have to get it all in sync somehow and is this messing up things on my computer? Also does this mean I am missing out on all the correct updates for my computer?
trying to update and install Net Framework 1.0 Service Pack 3 I get following message: " Application has generated an exception that could not be handled. Process id:0xf7c (3964), Thread id=0x40c (1036). "
View 1 Replies View RelatedI have tried to install this dozens of times, and automatic updates keeps downloading it over and over again, but "Microsoft .NET Framework 2.0 Service Pack 1 (KB110806)" always fails to install. I am forced to turn of XP automatic updates.
View 1 Replies View RelatedI keep trying to install the update Microsoft .NET Framework 1.1 Service Pack 1. It continues to tell me that it has failed to install.
View 4 Replies View RelatedI m trying to install Service pack 2 onto my home PC. I used to have SP2 on my computer and it worked and installed perfectly but months ago I had to format and put on SP1. I have now decided that I want SP2 back on and having tried around 6 times with 2 different discs and with no avail. I am having the same problem every time; it will not finish the installation and will hang on the boot screen. It will install all the components but on boot it will hang and not finish. It has installed before on this same PC with no problems but not these times. I have tried an upgrade, a clean install; install driver and computer updates then trying both ways again. I have tried a quick and even a long format process but with the same problem every time. Could it be the hardware? I have made 3 changes since the last time of having SP2 on my PC and they are as follows:
-GeForce 5500 has now changed to GeForce 6600
-Added more RAM 256mb to 1GB
-Added a fan
I m not sure where to go from this, stuck with SP1 and unable to install the latest software I need for my college work.
Can anyone tell me what this update is for which is considered high priority? I read what it says but still did not understand if I need it. I am only using this home pc. it is not at a business.
View 3 Replies View RelatedI have had Windows XP on my computer for 3 years, during that time I have had no problems with updates. A couple of days ago updates were running when I got the following message box. Service pack 3 setup. Access denied1! Microsoft will now un-install the current updates. At this point I was in a hurry to leave and shut off my computer thinking that when I started up again, the updates would resume their activity.......
View 9 Replies View RelatedFriends, I found that I have the following are installed on my PC:Microsoft.Net Framework 2.0 Service Pack1 Microsoft.Net Framework 3.0 Service Pack1 My OS is Wind XP 2002 SP2,I tried to remove Framework (2.0) and (3.0) but cannot, how to do? Any advices? which one should I remove or keep? and how to delete it?
View 9 Replies View RelatedI start up my computer, I get this message pop up: Fatal Execution Engine Error (0x7929f276) By accident, I went to my control panel and clicked on Administrative tools, and clicked on the Micrsoft.Net Framework 1.1 Configuration and got this same error message: Fatal Execution Engine Error (0x7929f276) so how do I get rid of it then? I went online and found out that I needed to go to my Add/Remove Programs and put a check mark next to the "Show Updates" which makes it show all of the Microsoft .Net Framework stuff. I did that, and managed to remove the Service Pack 3. BUT when I tried to remove all of the Service Pack 1 it said something like that "something is already in the process of installing, please wait till it gets done"
View 1 Replies View RelatedMicrosoft made any announcements about whether they will release a Service Pack 3 for Windows XP this year? If so, I haven't heard anything, and Microsoft service packs usually generate a lot of media attention. I thought perhaps Microsoft would bundle SP3 with the upcoming Internet Explorer 7. If there is no SP3 on the horizon, I suppose Internet Explorer 7 will be released by itself.
View 10 Replies View RelatedI'm running the Home Edition Version 2002 and ever since I downloaded Service Pack 3, I have had nothing but BIG PROBLEMS. Is SP3 compatible with this version or should I still be useing SP2. I've slowed considerably, jumping, lagging, skipping.
View 4 Replies View Relatedneed I keep older versions on my PC or can I uninstall them? I wouldn't see why they'd be needed, but a friend says that I should leave them there
View 7 Replies View RelatedWhen i try to install Microsoft.net framework from WindowsXP CD,it does not do anything.What could i do.Can i find it in the CD,tell me.I dont want to install it from internet or update
View 1 Replies View RelatedI just downloaded Sevice Pack 2 and will install by myself.
View 7 Replies View RelatedNeed some feedback on whether I should install Service Pack 3 for my Windows XP Home?
View 11 Replies View RelatedDo I only need to install service pack 4 only or 1,2,3 and 4, please?
View 3 Replies View RelatedI am unable to install windows xp service pack 2. I have downloaded it and it gets to final stages of instalation (performing cleaning) and then I get an error message saying that it could not complete installation. I have a proper copy of win xp and have used it for ages and registered it. The problems came when I got a new motherboard and it asked me to register windows which I did successfully. When I went to download SP2 it told me I had to register windows and to follow certain steps in the control panel.
View 1 Replies View RelatedI never installed Windows Service pack 2 on my computer yet. Do I really need this installed? Also, do I have to shut down any programs before installing it?
View 6 Replies View RelatedAfter even using Microsoft's "Fix It" and Diagnostic tools,I get an automated e-mail
"Your ID seems to have expired or you have already completed this process before.Contact your support engineer so they can guide you through the appropriate next steps"
I went through Microsoft Update to get the latest updates for a PC that only has SP1 installed (and was missing 50 Critical Updates to boot). After I installed the 50 CUs the next time I logged into Microsoft Update I was prompted to download SP2. Everything went well until the Registry backup portion of the SP2 installation routine.
About 6 registry entries couldn't be backed up. I ignored them and tried to proceed but SP2 eventually came to a stop where my only option was to choose 'OK' and it began to undo whatever changes it had done.
I shut down every startup item using CodeStuff's Starter prior to this update. There is no AV running or anything else. Microsoft Update didn't work originally so I reregistered a couple of .dlls
Can I install Service Pack 4 for windows 2000 without the internet? Is there a disk I can make?
View 10 Replies View Relatedso i installed service pack 2 today and had restarted the computer only to find that the welcome screen didn't appear, but the normal log in screen that i was used to seeing with earlier windows os. i logged in as both myself and my mom trying to make the welcome screen return, but nothing i've tried works. we are also unable to do the quick switch thing so we're being forced to completely log off and then log on again under our respective user names. whenever i try to switch accounts i get this message:This computer is in use and has been locked.'Only *insert name here* or an administrator can unlock it
View 7 Replies View RelatedI have tried several times to install XP SP3 on my DELL Inspiron 6000, XP SP2 and get and ?Access Denied? error. I understand that this occurs if one or more registry keys are restricted so that the software cannot alter them. I have retired installing SP3 after disabling both Zone Alarm and AVG antivirus programs w/o success. (do they need to be uninstalled?) I also understand that there is a way to reset registry and file permissions, but I am afraid that this would be beyond my comfort level. From the installation log, the first major logged failure is: 846.266: PruneCatalogsFromHotfixes:RegQueryValueEx Failed: 0x2 --- does this have any meaning. So far, these attempts have not changed the computers functionality, however, I am not able to make the restore function work.
View 11 Replies View Relatedi would like to install the sp2, but i have 1 question that is wondering me, what will happen if i install sp2 USING illegal serial lets just say USED-ALREADY SERIAL,but my windows is legal??
View 14 Replies View RelatedI was recently on Sp2 and decided to upgrade to sp3, I didn't like some parts so i decided to uninstall it - I was told to use add/remove program files "service pack 3" and after the uninstall, when I ran "winver" it appeared as "service pack 2" then some problems appeared such as whenever I clicked on internet explorer I get a notice bar saying "installing program" but nothing at all happened - after 10-15min it disappeared and internet explorer appeared.So I tried system restore, that only stuffed it up more, windows then said "service pack 3" when I was on service pack one and the errors were still there..I decided to do what I searched for on tech support guy forums and the guy said to reinstall windows and it won't affect any program files - only replace system files - so I tried it out.
Worked great and now I'm on SP2 but I'm still having the install problems with explorer.
I checked the setup api and found access denied on HKCRvnd.ms.radio, I removed all instances of this, cause I saw another post with the same problem and that seem to work for them. I also had an access denied for
c:windowssoftwaredistributiondownload16b2c96a0c41f4dfdb4d3cc228a4f819u pdateupdate.inf so I gave it permissions for everything. Still seem to be having problems trying to install service pack 2. And looking at the setupapi still seems to give me the same error messages even though I made the changes.
It boots to either Win 2000 or XP Pro. I run XP most of the time. Updates been coming in everyday. It won't install SP2 because the copy of Windows "may not be valid". Any way to get around this garbage?
View 3 Replies View Relatedwell im havin trouble reaching my control panel.when i try to access it, it loads up then closes it automatically and my whole desktop is gone,and justs shows my wallpaper.but in a lil while it comes back.everytime i try to access it, it wont let me and it justs closes and does it over again.also my other problem is that i can't install my service pack 2 it says that it has been "terminated" or sumthin like that.and when i keep on doing it and still says even in safe mode.so u guys know what problem lies here?
View 2 Replies View RelatedI couldnt install the service pack 2 because the installation says my product keys are unvalid and it gave a website to find the solution to my problem. But I couldn't find anything that fits my situation from this website... It's www.howtotell.com. I have the valid product keys now but couldnt find a way how to reenter it. Is there anything to do beside reinstall WinXP? I have another CD with valid product key.
View 1 Replies View RelatedI am trying to install Service PAck 3 and have run into the following error. Setup cannot copy the file hsfdppsp2.sys. Ensure that the location below is correct or change it and insert "Windoes XP System Files" in the drive you specify. Copy files from: c:windowssystem32drivers
View 3 Replies View Related