Bizarre Network Adapter / No Icons In The Network Communications
Sep 16, 2005
My network adapter does not appear in Device Manager, until I "Show hidden devices". And then it appears as a "Realtek RTL8139 Family PCI Fast Ethernet NIC", whereas I actually have a D-Link DFE-538TX 10/100 adapter. Furthermore, I get no icons (at all) in the Network Communications window. So if I want to change any settings of my LAN, for example, I can't, because I can't select the LAN icon or right-click on it. The LAN is working though. The current driver for the Realtek adapter which is listed is a MS driver.
Following overactive uninstallation of an ip filtering utility, my network adapter has stopped functioning. (Broadcom 440x 10/100 integrated controller, XP pro sp1) I strongly suspect serious registry damage, but none of the three highly rated registry utilities I have used have been able to fix the problem. In Device Manager -> properties, the message is : 'device not configured properly (code 1), reinstall the driver.' Attempting to reinstall the driver gives the following error message: 'An error occurred during installation of the device The system cannot find the file specified'.
I need to know how to change the name of a Network Adapter, specifically the Hamachi one. When going to Network Connections, under the Hamachi connection it states its Network Adapter name (also shown as this in Device Manager); Hamachi Network InterfaceI need to change Hamachi Network Interface to anything else, other than Hamachi Network Interface, Lets rename it to Local VPN.I have altared all instances of the name Hamachi Network Interface located in the registry (literally searched for it, and replaced all values and names that stated it with Local VPN instead of Hamachi Network Interface), I even changed all instances within the driver itself, reinstalled the driver, and it still would not altar the name to Local VPN.
I have recently acquired a Dell Studio 1555 laptop with the above configuration. My OS(and drivers) were partialy instaled by the seller. Now here is the problem. After I installed the network lan and wireless adapter(using the dell official drivers), I noticed that IE doesn't work. As I'm a Firefox person myself I just let it pass, but then I noticed that other things like the Java Runtime online installer, Yahoo messanger online installer, Blizzard downloader, Yahoo messanger itself(I got the full kit downloaded and installed it), don't work. The message is the similar on all of them: check if your firewall or your internet settings do not forbid access to X. Clearly, the firewall is off and the security settings are checked and shouldn't be a problem. So I got back to the internet explorer, thinking that all these are somehow related. I "used diagnostic tool" then "view log".
Had to reformat a drive and reinstall XP Pro on it, but upon reinstallation of XP it refuses to recognize the network adapter. It's been determined that the network adapter is a 3C920B-EMB Integrated Fast Ethernet Controller.Upon downloading drivers for this and attempts to install them, an error of "The device cannot start" occurs.On a separate install of XP on a seperate drive, the network adapter functions greatly. Is there a way to take the registry keys from the one install of XP and somehow...copy them over to the other install of XP? Or, is there a way to get the thing functioning without having to do that?
I have had my Gateway laptop with Windows XP for about 3 years now. For the past year or so, for some reason my Broadcom 802.11g network adapter has been showing up as having a problem, which has meant that have not been able to use the wireless feature of the laptop. I have lived with it until tonight. I tried to fix it by trying to download a new driver, update the driver, restore settings to a previous date, ect. After nothing working, I decided to do a system recovery. When I did this, it gave me 2 options, one with backup and one without. I chose the backup option and it said everything would be saved to a "my backup" folder. I went through the process which took quite some time. It installed windows and I set the computer up. After everything, when I went to the my backup folder, it only has applications, NO DOCUMENTS. I have TONS of pictures and important documents on my computer that I now can not find. I am panicing as I truley hope I do not lose EVERYTHING. Is there any way to get this stuff back? I have done several searches and nothing comes up. Ironically, my wireless adapter is now working, but I would gladly go back to it not working to have all of my pictures back.
network diagnostics network adapter failed realtek rtl8139 family pci fast ethernet nic(failed)is this why i can't get on the internet.windows xp home.IE can not dispay page,firefox page error.system restore won't go back to the previos month when pc was ok.also internet options won't open.Tried to download IE8 on20th Jan,had problems since then.
Booting the machine is fine; however, after loading up a few of the startup programs, the machine has a tendency to stall for around 3-5 minutes while loading the Local Area Connection network adapter as visible in the system tray. After the stalling, the remainder of the startup programs load in the tray and network functionality continues.There's 2 network adapters: Local Area Connection & Hamachi Sometimes the programs that load before it stalls have connectivity, sometimes not.. these include Xfire, AIM, & a batch script I have that updates dyndns.
I recently reformatted my hard drive and reinstalled Windows XP and now I am having two issues. The issues are Integrated Network Adapter not working and no sound from the Integrated Sound Card/Adapter. My Integrated Network Adapter is from Intel (which is built on the Motherboard), and I cannot find the Compaq Restore Plus! CD, Restore Supplemental Software CDs. I emailed Intel about the Network Adapter problem. My Integrated Sound Card/Adapter comes from a company called SoundMax. I would like to know where to download the Drivers for these two devices.
I am trying to set up a belkin wirless g usb network adapter on my daughters computer but i keep getting a message saying: Ahi-speed usb device is plugged into a non hi speed usb hub.
Since upgrading to Windows XP Service Pack 2, my network adapter (a 3Com 3C905-TX-M)does not appear in Device Manager and I therefore can't get this computer to appear on my home network. The network adapter is still working because that's how I connect to the Internet, via LAN to a router then cable broadband,and IPCONFIG gives valid results including the correct IP address from the router via DHCP.I installed a clean copy of XP Home on a spare hard disk. The network adapter appeared in Device Manager and the computer appeared on the network. I then upgraded to SP2 and the network adapter disappeared from Device Manager and the computer no longer appears on the network.
Im trying to install a LinkSys network card, and it doesn't work after I do. When I try to reinstall in device manager, the error I get is "name is already in use as either a device name or service name"I've tried all the obvious... uninstall, reinstall stuff. I know I have to play with the registry to fix this but I dont know where to start. Can anyone help me, because as of now, my mother's computer doesn't get the internet!
I have a Dell D600 Latitude that was working fine, then i opened and email that i thought was from my sister and now my network adapter is not recognized and reflects the yellow!. I bought a Linksys USB ethernert adapter and get the same result. The drivers cannot load.I have no way of connecting this computer to the internet to run updated virus software or go to Dell to run diagnostics.
I had to install a new hard drive on my laptop. It has windows xp. That installed ok and now I can't get my wireless to work. It says "No active network adapters". It is not plugged into the ethernet, my home computer is. I usually just get on my laptop in another room with the wireless that is built into the computer.
I had the problem with the infinite reboot cycle. I fixed that by just clearing out my whole hard drive, in other words full restore. But now the problem is, I can't find my LAN in my network connections. The only thing it shows is MSN and I dont use that. I use a router with all wires and I share the internet with me and my dad. Its modem to router to my computer and my dads computer. So i go to device manager and what do you know? I also cant find my network adapter option in it.
I have an Intel Network card in a fairly modern computer running Windows XP SP1. Unitil I uninstalled a VPN client I have had no trouble with it. However, after the uninstall, Win XP displays a yellow icon with an exclamation mark for the network card in the device manager and the info says "Code 31 Could not load the drivers for this device".I have tried uninstalling the network adapter (in order to be able to re-install it) but Win XP tells me that it "Failed to uninstall the device. The device may be required to boot up the computer".I have also tried upgrading the drivers for the adapter but the problem prevails.My guess is that the registry somewhere links my network card with a virtual driver that the VPN client used.
I am going to install a new OS Windows XP , Home with sp2 on my computer , at least try. Now i remember that the network adaptor is one of the things i need to d/l drivers for , well i have already run into trouble i have a Intel Pro/1000 CT network adapter and can not find the driver for it.
In a previous post, I mentioned that my network adapter is missing in action after a reinstall of XP on top of an existing Xp installation. I have been unable to identify my Mobo so that I can rectify this issue.Heres where I am today: Using system analysis software recommended on this site, I discover that my Mobo chipset is manufactured by Viathe Via VT8367-8235.Unfortunately, the specific board manufacturer is not apparent. (I assume that Via sells chipsets to many potential board manufacturers.)So I go to Vias web sight. I assume they actually do MoBos as well as chipsets. My board isnt specifically listed there.
So, a friend is looking to get a new laptop with a 17" display. I found this Toshiba Satellite model at BestBuy for $699: http://www.bestbuy.com/site/olspage....=1212192350169It comes with Windows Vista pre-installed. I went to the Toshiba support page for the laptop and found only ONE Windows XP driver and that's for the built-in modem. The bulk of the drivers are for Vista.What would the chances of actually getting Windows XP to fully function on this laptop? Where would I go for XP drivers for things like the ATI video adapter, the network adapters (Wi-Fi and Ethernet), and so on?
The Network Setup Wizard tells me that it found disconnected network hardware. My Broadcom 802.11g Network Adapter wireless connection is apparently disconnected. Any ideas on how to rectify this?
My desktop computer has been running windows xp for a long time. It also has a linksys wireless card that connects to a router in my home. Yesterday, I tried to run an ethernet cable from my router to my computer. The computer crashed/froze almost instantly. I decided to re-start the computer and again it crashed/froze. The reason I wanted to do this is because I want to connect my linksys wireless card to a gaming console so I can play games with people all over the world. This required me to change some of the settings on my network card. This time I changed the settings before connecting the ethernet cable to my computer. When I connected the cable, my computer showed the wired cable icon "searching for ip address" then I got the "blue screen of death" saying that windows crashed due to some form of network/hardware problem. I restarted the computer and in a few minutes I got the blue screen again...
I have FINALLY got to the bottom of why my PC is freezing, after weeks of trial and error. It runs perfectly normally when I unplug the Belkin USB Wireless adapter. Is there a way of repairing this? Do I need to download something to stop it from happening?
I have Windows XP Sp2 whe i try to chanhe ip in "Local Area Connection" i got following message:" Network Connetion Folder was unable to retrive the list of network Adapters":i checked "Services" .Ok working fine then what 's the problem??
I try to run network set up wizard but it wont find my network device.It finds my network card but i installed a wireless card. It wont find that. Its a linksys and I am using the linksys software to run it.
I have a gateway 6520 gz laptop with IE6 and XPHE, I 'm on a network with two computers and use NETWORK MAGIC for the network, when I turn the laptop on it wants to display {the page cannot be displayed} instead of going online! Then NETWORK MAGIC pops-up and says {YOU ARE NOW CONNECTED} then I have to manually turn on IE6 button to go online, almost like the page {the page cannot be displayed} wants to come up first instead of the connection?
