Network Adapter Infinite Reboot Cycle
Oct 16, 2008
I had the problem with the infinite reboot cycle. I fixed that by just clearing out my whole hard drive, in other words full restore. But now the problem is, I can't find my LAN in my network connections. The only thing it shows is MSN and I dont use that. I use a router with all wires and I share the internet with me and my dad. Its modem to router to my computer and my dads computer. So i go to device manager and what do you know? I also cant find my network adapter option in it.
View 3 Replies
ADVERTISEMENT
Aug 29, 2007
I recently had a new PC built for me by a friend of mine. It had some problems intially so he re-installed Windows XP and changed the RAM voltage to 1.90 in the Setup menu as the PC boots up.Anyways, he kept my PC for about 2 weeks while I was on vacation, running various programs and using it for all kinds of tasks on a regular basis, and everything was fine.I've had it home for a couple of weeks now. Every once in awhile something seemed wrong, but usually a good reboot would solve any problems...so no big deal. However, within the past week, it's had terrible troubles rebooting. This is basically what will happen.
A. It will boot up to the Windows loading screen, but right before it gets to the screen where you select a user, it crashes with a quick flash of the blue screen of death (I see it for like 1/5 of a second--so I can't read what it says) and reboots. Sometimes when it reboots I get the option to boot up in Safe mode. When the problems first started, I could boot up in Safe Mode, restart from Safe mode and everything would be fine. Now, however, I'm usually not so lucky.
B.When I finally get it booted up, I'll get some Error about a Registry file that had to be recovered from an alternate copy: Recovery was successful.After that, I usually get error reports for the following programs. These are the most common programs that will randomly cease to function, but there are usually some other error codes thrown in there too.
1. MSN Live Messenger
2. GoogleChat (internal error)
3. AcroTray
4. AVG anti-virus
5. Logitech Messenger
C. Here are some other errors I have recieved at random times. Some I've got only once in many reboots, others have shown up a few times. The most recent ones are at the bottom.
1. Nvidia Driver error
2. SoundMax
3. Smax4PNP
4. Exception has occurred while trying to run C: Windows/system32/NVCPl.dll/NVstartup
5. Some error with SetfilePoanter/Kennel32.dll
6. Runtime error System32/svchost.exe
7. Windows has recovered from a serious error.
C: Docume~1mynameLOCALS~1 mepWER9613.dir00mini082907-08.dmp
and WER9613.dir00sysdata.xml
View 6 Replies
View Related
Aug 15, 2007
My wifes computer is running XP. After an update from Microsoft last night the computer goes in an endless cycle of reboot. It will not let me reboot in Safe Mode. It gives me all of the options to do so but will default back to the general XP reboot
View 6 Replies
View Related
Mar 30, 2010
Hi, I am running an old Packard Bell Easynote bought in about 2005, with an AMD processor and Windows XP. The power supply recently broke so I've been using a new one. I think its quite cheap as quite often the power suddenly cuts out, and I have to wiggle it about and then it works again.
The other day I turned on the laptop and it comes up with a black screen with message in white typeface saying that i didn't shut down properly last time, and therefore do I want to start in XP or in Recovery Mode. I go to XP and the following appears
View 1 Replies
View Related
May 10, 2005
I had a thread on here before, but it got deleted so I'm starting a new one with fresh new problem.I set chkdsk /r to run on system startup, and it ran but took forever to scan file data (I left it running for 4 days) so I rebooted but it started chkdsk again! Theres obviously something telling it to run the scan on next startup because it never finished the first time. Now if I run it it just freezes at 0% for checking file data.It I go into startup options and tell it to boot in safe mode, it shows it loading all the drivers and then pauses and says "Press Esc to cancel loading a347bus.sys" and whether I press Esc or not it freezes. If I do last known good configuration, it runs into the chkdsk problem again.
View 14 Replies
View Related
Oct 6, 2009
Despite advice to the contrary my youngest son has taken to shutting his PC off by turning off the power on the back of the computer. Now it wont boot. It starts loading windows (shows the splashscreen) but then reboots, goes into the set up option page, ie safe mode/safemode with networking/last known good configuration and so on. Only I cant get it into safe mode or last known good configuation...just reboots and goes through the whole thing again. Tried repairing windows with the install disk but get to Recovery Console and then I don't know what to do-I just get a command prompt for C drive , like its awaiting a command but I dont know what command to give it. I cant see any other option to repair the installation. I dont want to format the drive and reinstall Windows unless i can help it.too much software to reinstall and lost game data!
View 1 Replies
View Related
Oct 14, 2009
My computer is in a reboot cycle, always asking the standard "boot windows normally, safe mode, last good known configuration..." It loads Safe mode fine. When looking at the minidumps it points to 'ntkrpamp.exe.' When I look that up I find a lot of hits about the RAM. I have 2 sticks in and I've tried swapping and using only one etc. with no luck. I was able to get the computer to work once after forcing a scandisk /r, but after rebooting it got stuck in it's cycle again. The minidump also says:ERROR_CODE: (NTSTATUS) 0xc0000218 - {Registry File Failure} The registry cannot load the hive (file): %hs or its log or alternate. It is corrupt, absent, or not writable.
View 2 Replies
View Related
Nov 1, 2007
It became very slow towards the evening and today I tried to restart it but it wouldn't reboot. It keeps going in the cycle from Windows starting up screen to Check disk screen and again back to black screen and rebooting.
Earlier today I was checking the C: and removing some of older applications which we are no longer using (via Ad/remove programs) and I have noticed that the C: and My documents looked strange. Lots of 'Found.???' files, lots of NFS(or something similar) files and for some reason number of pdf files (which originally belong to completely different folders).generally looked all re-organized and strange.
View 2 Replies
View Related
Feb 17, 2005
there are multiple trojans on my computer.and i know it because ive run mcaffee virus scan and they find them...can i delete them? no....why? because before its done and i can click the delete, i get a stupid error pop up screen saying mcafee has encountered a problem and needs to shut down.it gives me two options "close" and "debug" idno what debug is so i just close it..by the way this happens with a ton of random programs that i have (be it I.E. or AIM).also my coer does this weird thing where the whole screen goes blue with white
View 10 Replies
View Related
Jan 27, 2008
I just got a hand-me down sony vaio desktop.
My mother isn't tech savvy and had a few errors with it not wanting to boot up. As sony didn't include the windows XP disk (or even a simple recovery disk) she decided to buy a new system outright. So I inherited it.
I tried installing my main HD from my other PC into it, but it wouldn't recognize it at all unless it was as a slave. I hooked the vaio's HD to my PC and took the essential files that were to be saved from it (music, pictures, etc...) and then formatted it.
View 3 Replies
View Related
Sep 16, 2005
My network adapter does not appear in Device Manager, until I "Show hidden devices". And then it appears as a "Realtek RTL8139 Family PCI Fast Ethernet NIC", whereas I actually have a D-Link DFE-538TX 10/100 adapter. Furthermore, I get no icons (at all) in the Network Communications window. So if I want to change any settings of my LAN, for example, I can't, because I can't select the LAN icon or right-click on it. The LAN is working though. The current driver for the Realtek adapter which is listed is a MS driver.
View 5 Replies
View Related
May 12, 2005
I'm trying to recover the data from a SATA drive in a new Dell computer. I have an old computer that has an IDE drive with XP on it. I tried to install that old drive into the other computer and boot off of it and see if it can see the files on the busted SATA drive. It boots up and the XP loading screen flickers very quickly and then the system reboots. If I start it in safe mode, it also reboots while its loading all the drivers. The last driver it shows is "agp440.sys"
View 7 Replies
View Related
Jan 12, 2009
A friend of mine gave me an HP Pavilion ze4400. It had Windows XP installed on it when he gave it to me. I moved out of the area and forgot to take the XP CD with me. I was having problems with picking up wireless networks using my USB wireless adapter. Uninstalling and reinstalling the program for the adapter didn't fix anything, in fact, it made it worse. So I thought I would try using an XP CD to correct the problems that way. I had no idea that XP CDs weren't all the same.I put the CD that I had for my IBM laptop in the HP and it started to install. After about 10 minutes or so, I got a "Fatal Error":"An error has been encountered that prevents Setup from continuing.One of the components that Windows needs to continue setup could not be installed.The operation was canceled by the user.Press OK to view the Setup log file"The Systel Setup Log:"Error:The signature for Windows XP Home Edition Upgrade is invalid. The error code is 426.The service has not been started.
View 8 Replies
View Related
Feb 18, 2005
Following overactive uninstallation of an ip filtering utility, my network adapter has stopped functioning. (Broadcom 440x 10/100 integrated controller, XP pro sp1)
I strongly suspect serious registry damage, but none of the three highly rated registry utilities I have used have been able to fix the problem. In Device Manager -> properties, the message is : 'device not configured properly (code 1), reinstall the driver.' Attempting to reinstall the driver gives the following error message: 'An error occurred during installation of the device The system cannot find the file specified'.
View 1 Replies
View Related
Aug 22, 2009
I need to know how to change the name of a Network Adapter, specifically the Hamachi one. When going to Network Connections, under the Hamachi connection it states its Network Adapter name (also shown as this in Device Manager); Hamachi Network InterfaceI need to change Hamachi Network Interface to anything else, other than Hamachi Network Interface, Lets rename it to Local VPN.I have altared all instances of the name Hamachi Network Interface located in the registry (literally searched for it, and replaced all values and names that stated it with Local VPN instead of Hamachi Network Interface), I even changed all instances within the driver itself, reinstalled the driver, and it still would not altar the name to Local VPN.
View 3 Replies
View Related
Sep 12, 2009
I have recently acquired a Dell Studio 1555 laptop with the above configuration. My OS(and drivers) were partialy instaled by the seller. Now here is the problem. After I installed the network lan and wireless adapter(using the dell official drivers), I noticed that IE doesn't work. As I'm a Firefox person myself I just let it pass, but then I noticed that other things like the Java Runtime online installer, Yahoo messanger online installer, Blizzard downloader, Yahoo messanger itself(I got the full kit downloaded and installed it), don't work. The message is the similar on all of them: check if your firewall or your internet settings do not forbid access to X. Clearly, the firewall is off and the security settings are checked and shouldn't be a problem. So I got back to the internet explorer, thinking that all these are somehow related. I "used diagnostic tool" then "view log".
View 2 Replies
View Related
Mar 19, 2010
yellow ! on wan miniport ATW #2, can not start (code 10) tried uninstall & reinstall didn't work.
View 1 Replies
View Related
Apr 14, 2008
Had to reformat a drive and reinstall XP Pro on it, but upon reinstallation of XP it refuses to recognize the network adapter. It's been determined that the network adapter is a 3C920B-EMB Integrated Fast Ethernet Controller.Upon downloading drivers for this and attempts to install them, an error of "The device cannot start" occurs.On a separate install of XP on a seperate drive, the network adapter functions greatly. Is there a way to take the registry keys from the one install of XP and somehow...copy them over to the other install of XP? Or, is there a way to get the thing functioning without having to do that?
View 8 Replies
View Related
Dec 29, 2007
I have had my Gateway laptop with Windows XP for about 3 years now. For the past year or so, for some reason my Broadcom 802.11g network adapter has been showing up as having a problem, which has meant that have not been able to use the wireless feature of the laptop. I have lived with it until tonight. I tried to fix it by trying to download a new driver, update the driver, restore settings to a previous date, ect. After nothing working, I decided to do a system recovery. When I did this, it gave me 2 options, one with backup and one without. I chose the backup option and it said everything would be saved to a "my backup" folder. I went through the process which took quite some time. It installed windows and I set the computer up. After everything, when I went to the my backup folder, it only has applications, NO DOCUMENTS. I have TONS of pictures and important documents on my computer that I now can not find. I am panicing as I truley hope I do not lose EVERYTHING. Is there any way to get this stuff back? I have done several searches and nothing comes up. Ironically, my wireless adapter is now working, but I would gladly go back to it not working to have all of my pictures back.
View 14 Replies
View Related
May 21, 2010
The Driver for a wireless network adapter mn-720 needed.
View 1 Replies
View Related
Jan 27, 2009
network diagnostics network adapter failed realtek rtl8139 family pci fast ethernet nic(failed)is this why i can't get on the internet.windows xp home.IE can not dispay page,firefox page error.system restore won't go back to the previos month when pc was ok.also internet options won't open.Tried to download IE8 on20th Jan,had problems since then.
View 6 Replies
View Related
Aug 28, 2005
I have ran sveral searches, and cannot find a thing. Also have checked for any updates and fixes. No sound, some games don't play, no video,etc.
View 2 Replies
View Related
Sep 19, 2007
Booting the machine is fine; however, after loading up a few of the startup programs, the machine has a tendency to stall for around 3-5 minutes while loading the Local Area Connection network adapter as visible in the system tray. After the stalling, the remainder of the startup programs load in the tray and network functionality continues.There's 2 network adapters: Local Area Connection & Hamachi Sometimes the programs that load before it stalls have connectivity, sometimes not.. these include Xfire, AIM, & a batch script I have that updates dyndns.
View 1 Replies
View Related
Jun 23, 2005
I recently reformatted my hard drive and reinstalled Windows XP and now I am having two issues. The issues are Integrated Network Adapter not working and no sound from the Integrated Sound Card/Adapter. My Integrated Network Adapter is from Intel (which is built on the Motherboard), and I cannot find the Compaq Restore Plus! CD, Restore Supplemental Software CDs. I emailed Intel about the Network Adapter problem. My Integrated Sound Card/Adapter comes from a company called SoundMax. I would like to know where to download the Drivers for these two devices.
View 3 Replies
View Related
Oct 14, 2006
I am trying to set up a belkin wirless g usb network adapter on my daughters computer but i keep getting a message saying: Ahi-speed usb device is plugged into a non hi speed usb hub.
View 8 Replies
View Related
Aug 16, 2010
using an external wireless adapter can i set an ad-hoc network and my pc, so that any other laptop can connect to me
View 1 Replies
View Related
Oct 9, 2005
Since upgrading to Windows XP Service Pack 2, my network adapter (a 3Com 3C905-TX-M)does not appear in Device Manager and I therefore can't get this computer to appear on my home network. The network adapter is still working because that's how I connect to the Internet, via LAN to a router then cable broadband,and IPCONFIG gives valid results including the correct IP address from the router via DHCP.I installed a clean copy of XP Home on a spare hard disk. The network adapter appeared in Device Manager and the computer appeared on the network. I then upgraded to SP2 and the network adapter disappeared from Device Manager and the computer no longer appears on the network.
View 1 Replies
View Related
Jul 15, 2005
Im trying to install a LinkSys network card, and it doesn't work after I do. When I try to reinstall in device manager, the error I get is "name is already in use as either a device name or service name"I've tried all the obvious... uninstall, reinstall stuff. I know I have to play with the registry to fix this but I dont know where to start. Can anyone help me, because as of now, my mother's computer doesn't get the internet!
View 5 Replies
View Related
Nov 21, 2009
I have a Dell D600 Latitude that was working fine, then i opened and email that i thought was from my sister and now my network adapter is not recognized and reflects the yellow!. I bought a Linksys USB ethernert adapter and get the same result. The drivers cannot load.I have no way of connecting this computer to the internet to run updated virus software or go to Dell to run diagnostics.
View 2 Replies
View Related
Oct 2, 2008
I need a driver for my network card - a RAS Async Adapter. Can't seem to find a proper download anywhere on the net! Not even on Windows Update.
View 9 Replies
View Related
Jun 30, 2009
I had to install a new hard drive on my laptop. It has windows xp. That installed ok and now I can't get my wireless to work. It says "No active network adapters". It is not plugged into the ethernet, my home computer is. I usually just get on my laptop in another room with the wireless that is built into the computer.
View 1 Replies
View Related
