Trying to install XP on a SATA W.D. Raptor I've did it before but now when I put the floppy in for the Drivers I keep getting TXTSETUP.OEM missing I've checked the floppy for its contents and it is there, The drive has XP Pro on it now but been running it for a year and like to clean it up.
View 1 RepliesGot new parts for PC upgrade. All parts new (including cables) but recycled HDD and DVD/CD-ROM.All bits connected and powered up last night in about 10 mins. Put Windows XP CD in, went into setup/ reformat process then PC needed rebooting to continue with Windows setup. Fine. or so I thought. rebooted, went into "Please press any key to boot from CD". IF pressed any key, went through the whole reformat, copy setup files etc. ELSE, just hangs on that screenie. No error messages or anything!Seems to me like it's gone into a loop, and not running the Windows set-up files copied into the HDD.
View 2 Replies View Related"missing NTLDR" viruses an my PC with XP Home. I am trying to do a clean install of XP Pro. I boot to the CD and it starts checking the configurations. I then get a screen asking for me to insert the CD in Drive "A". It won't read the CD no matter what I do. The PC only has the DVD/CD-rom and the hard drive.
View 8 Replies View RelatedI've reformatted my hard drive and am doing a clean install of Windows XP Pro.I have an upgrade-version XP CD. With previous Windows versions, I could upgrade this way with no problem: I booted from the new CD, and at a certain point the install program asked me to insert my previous Windows CD to verify that I qualified for the upgrade., when I try to boot from my Windows XP CD, it says, "This program cannot be run in DOS mode." Does this mean I have to reinstall Windows 98 before I can install Windows XP? Or is there some other way to verify the upgrade?
View 14 Replies View RelatedI have been having problems when i tried reverting from windows 7 back to Windows XP Home Edition. At first i was able to get to windows setup (Blue screen) when i had the disc and partitioned to install the XP Disc. The computer restarted and i get to "press any key to continue (with the disc)" and i do so and it says "set up is inspecting your computers hardware" and then screen turns black and nothing appears. When i take the disc out it says "Error Loading Operating System". I can't really do much of anything now. Only screen i can get to is f1 to the "bios setup utility".I have an HP a450n.. Really need help i been wanting to use XP again because windows 7 annoyed me because it lagged my games. it has ran windows xp before and worked very good as well as for the games.
View 5 Replies View RelatedA dell 8600 laptop i had xp on it it was running slow for the last few days & i tried to reinstall it the system crashed during set up and i had to restart it and when it restarted it said set up is restarting and then it showed fatal error one of the components that windows needs to continue could not be installed manifest phrase error invalid at the top level of the document press ok to view log file and when i do thatthe log file appears and when i close it it restarts the comp and aganin goes through the same fatal error i have tried the safe mood and it says setup can't run in safe mood i have tried the last good config it won't run.
View 7 Replies View RelatedI have a HP laptop that once ran on Vista. This summer before I left for college,I decided that it was finally time to downgrade to XP,seeing as I had backed up everything, and classes would be starting in a week.So I did the usual thing. Insert CD, restart computer,"A problem has been detected, and Windows has shut down...."Blue Screen of Death. The Stop Message: 0x0000007B (0xF78D254, 0x00000034,0x00000000,0x00000000)
View 7 Replies View RelatedWhen I try to install Java, I get the following error message:Error 1304.Error writing to file C:Program FilesCommon FilesJavaUpdateBase Imagesjre1.6.0.b105 patch-jre1.6.0_05.b13launcher.exe. Verify that you have access to that directory Well I go to that directory and double-click it, and I get the following messsage:Windows cannot access the specified device, path or file. You may not have the appropriate permissions to acces the item.
View 10 Replies View RelatedEvery time I reboot a setup window appears. When I click the next button an error say can not install on windows NT.
View 5 Replies View RelatedI've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could
cause the problem.
I have a clean drive and trying to install XP Pro and I get near the end of the install i get an error message saying to reinstall windows rootsystem32ha1.dll. I have not found any real info on the internet other than comments about it being a common complaint.
View 9 Replies View Relatedi am trying to install windows office 2007 but after a minute from start of installation ,it popup dialog box saying setup can not find setup.exe file and say browse valid installation source and click ok.
I don't know whats happening.I have just formated my C drive and installed fresh copy of windows xp.
here is image of error message.
what should i do?
http://img101.imageshack.us/my.php?i...9005582dv8.jpg
This one has really got me stumped, and even worse, I need this stuff installed ASAP,So yesterday I formatted/install windows xp pro sp2, I did my usual thing, windows updates, fire fox,Skype. I then tried to install MS Office 2007 Enterprise. I (still do) recieved the following error message, "Setup cannot find Office.en-usdwtrig20.exe. Browse to a valid installation source, and then click OK", allowing me to browse for dwtrig20.exe.dwtrig20.exe IS THERE, the installation works perfectly on another machine of mine!I then tried to install MS Visual Studio 2008 Pro, this time, i received an error while trying to install Visual Studio. It failed while installing "Visual Studio Web Authoring Component". I extracted this component and attempted to install it 'on its own' and it failed.
View 1 Replies View RelatedI bought 2 SATA HDDs and would like to set them up as RAID and clean install XP and all the drivers/programs on them. I don't want to use those image drive programs to transfer the old drive to the new drive. My old HDD has XP on it (activated) and I would like to format it and use it for data storage later. Do I need to reactivate after I clean install XP on the new HDDs (same mobo and CPU)? I have NOT plugged the HDDs in my computer yet.
View 4 Replies View RelatedI am going to try to do a clean install of XP. When i am ready to get my updates do i download all of them at once then reboot or do i have to get one at a time and reboot after each one?
View 4 Replies View Relatedwhat drivers will I need? ..I have most of the stuff but some of the disks were for my winme OS I think. How do I find out what motherboard I have and what driver I need?if it all goes pear shaped will I be able to put my old master in and get back to square one?if it the Xp install goes fine can I put in my old master as slave and copy the needed files over to the new master? The old master is fat32, so would that be a problem?I only have the winme version of word but my dads laptop has word perfect for xp...could I use this?
View 4 Replies View RelatedWhat would be the easiest way to do a clean re-install of Windows XP without the manufacturer's CD?
View 2 Replies View RelatedI am unable to reinstall my HP printer driver and accompanying software and after spending more than enough time trying to remedy the problem, I've decided to reload Windows XP either by a clean install or a reinstall per this thread. I hope to get some advice here.The details that led to the problem of being unable to install my printer drivers and my attempts to remedy the problem are very long and drawn out and may not be relevant to this post or my desired solution, so I will not go through them unless requested. Suffice it to say that I have spent a good 30 hours attempting to remedy the problem, with a good portion of that time spent with free HP Support. None of their "fixes" or any of my own attempts after lots of research have been successful.
I have installed XP several times on several different machines and thus, I'm very confident with a routine install. However, due to a special configuration on this computer, I need some advice.First: Will a reinstall per this thread potentially fix my printer problem? I know there may not be a definitive answer here, but I would just like to get some feedback.If more detail is needed on the problem, I will be happy to provide it.Second: Due to space restraints on my boot drive (18 GB SCSI drive), I moved the Documents and Settings folder to a large IDE storage drive (E:) on this machine. Will I be able to refer to the Documents and Settings folder during a clean install, so that all of the current settings will load? If not, is there a solution for getting the current settings loaded into the clean XP install?
In reinstalling Windows XP, I did a full format to erase the old programs. While reinstalling the various programs, Sun Java, it posted a screen stating that a version of this program was present in Document and settings. I thought that the full format would clear this out.but evidently it didn't.
View 12 Replies View RelatedPC wont boot up any more , it says there could be a currupt or missing file , it says its config system and says it might be able to repair the file using the install disc. i have a System Recovery CD-ROM
View 1 Replies View RelatedI have a prob
Laptop P4 running XP Pro
Can't load Office XP because I get an error missing setup.ini file.
Ran a spyware but no help.
Any suggestions??
When trying to install Windows XP Pro I get the following error message "Setupdd.sys cannot be loaded error 14. Setup can not continue. Press any key to exit."
Anybody have any ideas how to solve this?
get winXP to format my sata drive at bootup, so I can clean install XP again I'm resorting to this measure 'cause XP seems to be hanging during bootup
View 1 Replies View Relatedhow can I clean my c drive so that I can do a complete clean install of xp pro. I do not need to save any of my files or programs. I would rather get rid of all the bugginess and start fresh.
xp pro is the current OS.
Plan to do a clean re-install of my Toshiba Satellite P10 series , I have the disc's that came with the computer IE . Microsoft Works , and two Discs marked Product Recovery CD-ROM, is this everything i need to do a re-install and what order do i use the Disc's , as you may gather i haven't done this before.
View 1 Replies View RelatedI had gotten some malware, and despite all my efforts(combofix etc.) I couldn't get rid of it, so I bit the bullet and wiped the partition and reinstalled windows XP professional clean. I have gotten malware before and done this no problem.Now after installing windows XP and installing some drivers, I noticed the computer would lag horribly, I checked task manager and it showed 100% CPU usage. I Checked the processes and it is always showing that "system" is the one doing this. Also windows XP is incredibly slow on boot up, and won't even shut down. Now, I'll state what I KNOW is not the problem.
View 13 Replies View RelatedI am working with a small school as IT help (along with other hats). We recently replaced PC's in a computer lab with new IMACs. I now have these older PC's that came preinstalled with Windows XP Home on them. I was going to keep them around to use as back-ups in the classrooms or additions for tutoring,etc. My first question is, since they were used for about 2-3 years in a lab scenario, should I do a fresh install of Windows Xp or just try to clean them up the best I can. (They all are DELL running 797mhz and 512mb RAM.)
If a fresh install is the best option, I have another question.
Its time for me to rebuild the old machine and i started looking for a guide i once saw on here (TG) which showed you the best way to install a clean copy of XP on a new machine.
View 2 Replies View RelatedI recently did a clean install of Windows XP but for some reason one of the features I used to have no longer works when previously it did work. I can't set the PC to hibernate. It's not really a big issue I know but it bugs me and I hate being stumped by such an issue. I've tried everything including looking for drivers. XP says it doesn't need a APIC driver yet it's listed under system hardware. Everything else works fine it's just this little thing that is bugging me silly.
View 6 Replies View RelatedI was trying to do a clean install with my Sister's PC because she messed it up so badly with adwares, spywares, and what-not.First, I tried to boot the XP Home cd but it didn't work. I don't even know if it's bootable?anyways, then I tried installing from Windows itself, which I later read was something I shouldn't have done.The install was going well, then it rebooted the PC. Now, I see an option to boot the XP cd.Specifically, before, I only had options to boot Windows XP Home and go into the Windows Recovery Console.I chose the XP setup and tried to delete the C: drive, but it said I couldn't. Then, I tried to delete the D: drive, and it worked. I tried once again to delete the C: drive to no prevail. So, I thought I'd restart the PC to see if it would change.And then it happened. It didn't start up with the XP setup option nor does it boot Windows. It just loops inself to the Windows XP Home logo, restart, rinse and repeat.
View 10 Replies View RelatedMy current situation: C: 1.97gb/109mb free/Healthy System//xp pro installed (stupid me) D: 4.87gb/3.10gb free/Healthy Boot//xp pro installed G: 12.1gb free/Healthy/nothing on it yet. *3 are logical drives on one physical drive
I want to delete all partitions and put everything at C: and install xp on it. How am I able to this? Or do you have any of your suggestions about on how to manage the space. Last time I accidently installed xp on c, and it lagged like hell!