when I try to install XP onto a new hard drive it hangs on the first blue setup page with windows setup showing on the top line and nothing at the bottom to continue with. I updated the BIOS on the original motherboard and have now fitted a new MB but still the problem is the same. Everything was fine before the original drive went down with death rattles.
View 2 RepliesI've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could
cause the problem.
I am trying to install XP Pro on a machine with an AMD K6 clocked at 266mhz and 160mb of RAM. This is a laptop currently running Windows 98 SE. 98 works fine for me but I hate installing drivers. The laptop is an Compaq Presario 1235. I just want the laptop running XP, it doesn't have to be lightning fast. In setup, it hangs at Setup is Starting Windows. It does the same when installing Win2k.
View 4 Replies View RelatedI just got a new WD hard drive for my latitude D600. I try to install XP but it keeps loading and giving me a blue screen.
View 12 Replies View RelatedI have used the search facility to try and find a result to this problem but alas to no avail.I have had XP pro in this desktop before so I know it's compatible. Recently I decided to upgrade to Vista but decided that it wasn't for me and have tried to downgrade back to XP.On first try with XP pro setup bootdisk I got by said problem and got to the format/partition bit but got error message saying unable to load operating system half way through install. I figured it could be because i didn't set up boot in bios properly using bootup selector instead and upon restart during install it tried to boot from hd.
So restarted and sorted bios selection out but now get this wierd problem, being on ANY install disk of XP (I have a few) it jams after "setup is inspecting your computers hardware" i.e. blank screen and nothing happening. I've tried unplugging everything and leaving only cd-rom, hard-drive and monitor/keyboard/gfx card and mouse connected but all to no avail.The drive I'm trying to install to is a samsung 150gb hard drive partitioned to 20gb and 130gb respectively with data still on the 130gb section that i'd like to keep.The most interesting thing is that the Vista disk that I have installs fine without problem which is how I'm writing this.
I can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies View RelatedI am trying to install xp on this good friend of mine's machine that took a dive last week. We replaced the motherboard, cpu, and memory. And afterwords for about 3 days, it seemed to function ok. Then it just quit booting. I told him we would need to reinstall windows. I was kind of shocked we did not have to in the first place. Anyways, So now I am trying to reinstall windows:I can get it to boot from the windows cd, it goes through the standard list of drivers, and at the end says, "setup is starting windows"... Then it just hangs there indefinately. Typically after this, you get to the screen that asks you if you want to install windows, then you hit f8 to agree to there stuff, then you get to partition ect. I mention these things so you will know what part I am talking about.
View 5 Replies View RelatedI have an Intel 945GTP motherboard running XP Pro on a SATA HDD that, until last week, worked just fine. Then, it decided not to boot up one morning, in either regular or safe mode.It won't boot from the CDROM drive either. It does boot from floppy.I've replaced RAM, taken out all non-essential hardware, replaced HDD cables.HDD can be recognised in another system.Mouse and KB are not usb.I removed the HDD partition, intending to reload XP, but the load hangs on "setup is starting windows" and never goes anywhere - i left it overnight, just to be sure.I repartitioned and reformatted using a 98 disk, just for kicks, to see if it'd work. Yep, boots to c:> HDD manufacturer's diagnostic reports no errors.I have put in another, new SATA HDD, as well as a new ide hdd.
View 1 Replies View RelatedI just bought a Seagate ST3400620NS SATA HDD. I want to install it as a second HDD just for storage. I currently have a ST380815AS with the OS (XP SP3) on it as the primary drive. The PC (HP DC570 SFF) boots fine with only the primary drive installed. When I add the 2nd HDD the the system recognizes that I have added a 2nd HDD. It asks me to save the settings by pressing F1. I do that. The XP boot screens displays. The blue progress bar moves once and the system reboots. I switched SATA connectors for the 2nd HDD but when I boot I get a message that I need to move the connector back to the original spot.Then I thought maybe the MOBO (Hewlett-Packard 0A64h ) only supported 1.5 gb/s. Not the case. So I am totally stumped. I checked HPs website to see if there were any updates, and there was an advisory that a different model Seagate HDD might cause a similar sounding problem but no mention of the model HDD that I own.
View 2 Replies View RelatedI'm formatting my hard drive and re-installing XP, and I'm wondering if I can delete the system partition without any adverse effects to the system. When I try to delete it from the XP Setup disk, it warns me not to do it, but I'm trying to create a larger partition for the system. Can I delete the system partition and create a new one.
View 3 Replies View RelatedI'm going crazy with this issue and I cannot find any possible solutions. I hope someone in here can help me somehow.Let me explain what's my situation. I have a SATA drive (WD 160GB) I had Windows XP installed on my machine until yesterday that I decided to try a beta version of Vista. Now, I want to get rid of Windows Vista and install XP again. However, when I insert my CD to boot, after it loads all the files,etc...It shows me this message Quote: Setup did not find any hard disk drives installed in your computer.
Quote :Make sure any hard drives are powered on properly connected to your computer,and that any disk-related hardware configuration is correct.This may involve running a manufacturer-supplied diagnostic or setup program. Setup cannot continue. To quit Setup, press F3.
I will be creating a partition on the second Hdd for the pagefile.I have 2 Gig of Ram installed.My question is what size should the partition be? Less than than 8 Gigs I am aware of.But more importantly, what Min and Max should the settings be for the PagFile. Perhaps let the system decide?If I do set a PagFile on the OS partition I am considering 2MB - 200Mb to generate a kernel dump report. Note: Although I will have an Image of OS If the issue at hand is small enough I amy gain some experience in trying to fix it using the reports.
View 9 Replies View RelatedI have a Dell XPS 400 and I'm running off of a 500 gb barracuda harddrive. Here's my problem. When I try to boot up my computer I got the following error a second or two after the windows logo shows up "A Problem has been detected and windows has shut down to prevent damage to your computer." The error code is STOP: 0x00000024 (0x00190203,0x85D97A98, 0xC0000102, 0x00000000) When I insert my windows disc, I get the following error "Setup did not find any hard disk drives installed in your computer". I searched online and attempted to integrate my harddrive drivers onto my windows disc. This is the source from which I got my drivers http://support.dell.com/support/down...&fileid=173456. I then proceed to use a program called Nlite to create a new windows disc, and burnt that disc using a program called imgburner. When I use that disc and press F6 during set up I get the following message "Setup could not determine the type of one or more mass storage devices installed in your system, or you have chosen to manually specify an adapter.
View 14 Replies View RelatedA problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies View RelatedI will try to make this brief. I have a dell dimension 2400 that the hd went down. I have a like new IBM drive installed, the bios recognizes it, however, I cannot get the computer to re-install the cd that i have from dell to reinstall xp. i have the boot sequence to start with the cd, however all I get is press f1 to try again, for f2 for setup.
View 5 Replies View Relatedi have a Compaq nx 7400 .i was hahving a lot of problems with the computer so i decided to put a new hard drive in and reinstall XP .
well i have the new hard drive in and started up the machine and changed the bott options to run from the dvd and all went fine until i should press the ENTER ( return ) button to install XP now . as soon as i did that the next window said no hard drive found . this was also happening on the old hard drive that was in the machine .
My brother has a Dell laptop that came pre-loaded with Vista. He asked me to remove it and install XP for him. I've re-installed XP on several computers but I'm stuck here.
When I boot from my XP disk, I press enter to install a new copy of XP, but then it says it cannot find a hard drive and setup cannot continue
my system crashed for no reason. when i started it back up, it was in dos with the menu of 4 boot options. hard drive, cd rom etc.. it wont boot from hard drive so i put the windows disc in and tried to boot from it. it tried to setup but it said it cant find a hard drive and to exit setup.
View 14 Replies View RelatedI changed something in setup utility, but not shur what it is that I changed. now I get this, and Secondary hard disk drive 1 not found.
View 3 Replies View RelatedI was listening to some Good Charlotte, and in my D: and all the sudden I get a blue screen sayin page fault none page area... I also got this problem when I tried to reinstall Media Player 9. It sounds like some system file is triggering tihs
View 2 Replies View RelatedIm trying to instal a copy of windows xp and every time it gets to the screen where it says to you want to do a recovery or new install it freezes and never comes out of it. I found it weird though when i tried to instal ME or 2000 on the computer it goes through it fine. The computer isn't too old 2.4 ghz 1gig ram 120 gig hard drive etc.
View 11 Replies View RelatedWhen I attempt to install XP it is hanging up at "windows is starting windows". It does it with either my XP or 2000 program.
View 1 Replies View Related1.I have a dell digital jukebox mp3 player that allows for storage of data or music. I tried to copy a 600mb file from the mp3 player onto my hard drive. I had a little over 600 mb of space left on my hard drive (a total storage capacity of 6GB). It said i had run out of space. So i deleted some files, move some things around and i had 1.1 GB of space free for this transfer. i tried again and this time again the message i got was not enough space on drive c:/. So i cancelled out and checked to see what i had on my hard drive, 500mb free!!!?? So i have lost hard drive space and not gain a file...So i investigated and found that i have 1.81 GB of data on c: documents settingsuser. but once i get into user, i have 6 folders none of which display nearly that much data. They are, favorites, start menu, cookies, desktop, my documents, and a file named ntuser. the ntuser file is 1mb, and my desktop has 700 or so mb on it. So my question is how can i get back this lost hd space,
2.Blue screen. Im on xp pro sp1, i use adaware, registry mechanic, and im generally tidy with my windows; note, reinstalling windows did not solve this. I never used to have this issue, but lately when i go to open or close certain programs i jump to blue screen. it references trixdp.dll i think it was, and then "begin physical dump of memory" i must reboot at this point. I use VLC media player, and exiting this program mandates a blue screen. Just now i exited mozilla browser and this was the first time i got blue screen from this program.
I have windows xp home edition service pack 1 with all the updates, i can't install sp2 because my hardware (even with bios update) will not accept it and i had to reinstall windows after not being able to boot from installing sp2...but that is another story. After doing some recent updates my computer now hangs for about a minute before entering windows, it hangs after it reaches the blue screen that says "windows is starting" than finally you see "welcome" and it loads. I'd like to think of myself as a power and advanced user so i did the basics, checked the startup, disabled services, ran norton, used microsoft antispyware did a registry check, used tuneXP to defrag the boot.ini and used bootvis. The comp sure as hell restarts fast but bootvis says that "log on service" takes 168.7 seconds that is just not good.
View 5 Replies View RelatedI am running Windows XP Home Edition, Service Pack 1. When I go to Windows Update, the page just hangs.
My ADSL Internet Connection is really slow.
I have also run Spybot Search and Destroy.
am here seeking ur help regarding slow boot up issue am facing with my Windows XP SP3 for a month now. I couldn't really swift through the forum completely, just in case my concern has been solved previously, please let me know , I will get directed to that page.It takes around 7- 10 minutes to get the welcome screen! And during that process system restarts itself twice..I use McAfee AV and SuperSntiSpyware and PC looks like got no threats. 2 days back i also scanned my Desktop thoroughly with Windows live scan and fixed few registry errors and no other threats were reported.When I switch the power on, power LED starts glowing only after 3 minutes after 2 more minutes black screen appears which shows boot agent and restarting happens.
View 13 Replies View Relatedi am trying to install windows xp service pack 3. but the windows on that kept freezing at the same point, every time it loaded to a state where i couldnt even move the mouse, was working perfectly fine before. i inserted the windows xp sp3 disk, and formatted the hard drive to ntfs (quick) and then the files started to copy, once that was done, it restarted and the actual installation part started. it went from 39 minutes down to 35 minutes and froze on the installing devices part. i thought it was a common error so i restarted the setup. this time it went to 34 minutes and froze. most of the times it would get stuck on 34/35 minutes and either froze or restarted the laptop for no reason. Only once, it went down to 23 minutes and froze. only 2 out of 30 tries went past the install devices section.
View 2 Replies View RelatedAfter resolving an issue resulting from a printer installation, I was able to get my computer back to a state of normalcy, except that the CD drives were no longer found by the system.This is a Win 2K and there is a DVD-ROM and a CD-RW.So rather than do the smart thing and reinstall them via the OEM CDs, I went into the Bios and tried to tell the Bios that they were the Secondary Master and Slave drives (duh).So now, the system hangs, telling me that the primary slave auto detect wasn't finding anything. (Even though I didn't address that when I screwed with it.)I cannot even enter the BIOS setup, since the hangup occurs before the system even gets to that point.If I can get back to BIOS setup, I can at least reset to defaults, then figure out how to do the right thing, but for now, I'm STUCK.It's an MSI KT3 Ultra Mother board If more info is needed I can probably get it, but wanted to keep the initial post short.
View 1 Replies View RelatedA new 250 gig seagate SATA 7200.8 hard drive and a win xp home upgrade edition. enabled SATA in BIOS, connected SATA cable to SATA1 on mobo, BIOS didn't recognize the drive, connected to SATA2 and BIOS did recognize drive so I tried to partition and format using Seagate's DiscWizard from floppy. Things seemed to go fine until I got a message that format wasn't completed because of some error.I went ahead and tried to install from xp cd, loaded SATA drivers from floppy, cd started loading but then hangs up at "setup is starting windows"I've never used SATA before.
View 7 Replies View RelatedI'm trying to do a clean install on a laptop and every time I try to install Windows XP Pro, it hangs at the screen that says "Setup is starting Windows" I've also tried installing Windows 2000.
View 8 Replies View RelatedI just installed a new hard drive then I installed windows XP SP2 on the disk and the computer keeps rebooting and I'm getting a blue screen c000221 unknown hard error. Then I re-install windows 2000 it works Ok. Then I installed windows XP SP1 it work OK, then I installed the SP2 and the computer started to reboot again. I used drive jujitsu and it was OK. So what is the issue with SP2 and the Maxtor drive anyone knows or has seeing this issue?
View 3 Replies View Related