Bios Hangs / Cannot Enter Setup

Apr 28, 2005

After resolving an issue resulting from a printer installation, I was able to get my computer back to a state of normalcy, except that the CD drives were no longer found by the system.This is a Win 2K and there is a DVD-ROM and a CD-RW.So rather than do the smart thing and reinstall them via the OEM CDs, I went into the Bios and tried to tell the Bios that they were the Secondary Master and Slave drives (duh).So now, the system hangs, telling me that the primary slave auto detect wasn't finding anything. (Even though I didn't address that when I screwed with it.)I cannot even enter the BIOS setup, since the hangup occurs before the system even gets to that point.If I can get back to BIOS setup, I can at least reset to defaults, then figure out how to do the right thing, but for now, I'm STUCK.It's an MSI KT3 Ultra Mother board If more info is needed I can probably get it, but wanted to keep the initial post short.

View 1 Replies


ADVERTISEMENT

Not To Enter Bios Setup

Sep 27, 2010

not to enter bios setup

View 1 Replies View Related

Cannot Boot From CD - Enter Safe Mode - Enter BIOS On Startup

Nov 6, 2008

I've been messing with and Googling this problem all day and am stumped My laptop:
Toshiba A105-S4134 XP SP2 MCE 2005 Intel T2400 Duo Core 2 GB RAM1. Two days ago I had a glitch - a bunch of browser windows were open and the system just sort of froze up. I ended up doing a hard restart. The PC then took a longer than normal time to boot back up.2. That made me nervous, so yesterday I made True Image images of both partitions on the HD, that is C: (OS and apps) and D: (data).3. This morning I decided to run a memory diagnostic disk (I had memtest86+ and Windows Diagnostics CDs on hand). I set boot priority to CD/DVD ROM using Start > All Programs > Toshiba > Utilities > Toshiba Assist > Optimize > Toshiba Hardware Settings

View 9 Replies View Related

How To Enter The BIOS Menu?

Dec 8, 2005

How do I enter the BIOS menu for Windows XP? I'm running a Sony VAIO notebook but I can't find the documentation.

View 11 Replies View Related

Enter In Bios Of HP Pavilion

Jul 8, 2005

How do i get into the bios? i have a hp pavilion pc, and i can only get into some sort of bios, pressing F1 or F11. is there anyway i can get into the 'real' bios??also i ran bootvis (it works for me) but it said that 'disk write caching is disable'. can i enable this? also i had my hard drive replaced under warranty from PC world, could they have messed up?

View 9 Replies View Related

Users Try To Install Fax Client / Setup Hangs Asking For Fx Setup Files

Aug 20, 2005

I've setup Windows 2003 fax services on a W2K3 server and shared the device. I've tested faxing from Word on my PC and it works fine.However, when other users try to install the fax client, the setup hangs asking for the fx* setup files. I've tried different XPSP2 CDs, copying the files to a local directory, making sure that the users have local admin rights (and even domain admin rights) but to no avail. The files are already in the system32 directory so in theory the setup doesn't even need to copy them. Even if I delete them, it doesn't work.Our corporate SMS team reckons that there isn't any policy which could
cause the problem.

View 1 Replies View Related

Black Screen After BIOS - Unable To Enter Safe Mode

Jun 4, 2008

When my computer loads up,after the bios i get a black screen. I am unable to enter safe mode or even boot from the Windows XP.

View 8 Replies View Related

Computer Refuses To Enter Hibernate Mode - Check The Bios

Jan 15, 2009

I have windows XP on my laptop and it just refuses to enter in a standby mode, neither Hibernate mode.Usually it runs very normally but every time I try to put it on standby I get a blue error screen that says that my system have to shut down because of a serious error and that I have to check the bios. After that I just switch off the button and have to turn it off!

View 5 Replies View Related

Hardware Monitor Found An Error / Enter Power Setup Menu For Details

Aug 9, 2005

the windows will freeze after running 2 hours with doing nothing. when it is booting up, there is a messages says: Hardware Monitor Found an error, Enter Power Setup menu for details. Now, I enter the BIOS in Power Menu, everything seems fine.I took out one memory stick, It ran fine until I reformatted the harddisk. and all the mistakes come out after i formatted the hardisk? How can there be an explanation?

View 11 Replies View Related

Xp Setup Hangs

Sep 13, 2007

Im trying to instal a copy of windows xp and every time it gets to the screen where it says to you want to do a recovery or new install it freezes and never comes out of it. I found it weird though when i tried to instal ME or 2000 on the computer it goes through it fine. The computer isn't too old 2.4 ghz 1gig ram 120 gig hard drive etc.

View 11 Replies View Related

Bios Setup Not Opening

Jan 16, 2009

i have a very serious problem with my pc when i start my pc it satys on dos ,and messages shows like press F1 to continue or press del to enter the setup now when i presss f1 it start the windows fine but when i press DEL nothing show up just a black screen thats all now problem is i cannot get to Bois setup to work it out

View 4 Replies View Related

How Setup SATA Bios

Aug 5, 2010

I have 2TB SATA HDD for storage purpose and one SATA HDD for my OS, how can i setup my bios to be able to boot to my OS?

View 1 Replies View Related

Setup Bios To Be Able To Boot To OS?

Aug 5, 2010

I have 2TB SATA HDD for storage purpose and one SATA HDD for my OS, how can i setup my bios to be able to boot to my OS?

View 2 Replies View Related

Can't Get Into System Setup (BIOS)

Apr 4, 2007

Running a Dell XPS710. Was on the phone with tech support and had to go into setup to check on something. after I got off the phone, I rebooted and tried to access setup and can not. I don't know if I accidentally checked off something that won't allow me to use the keyboard until the machine boots into windows because pressing F2 (Setup) or F12 (Boot Options) when the Dell splash screen appears won't work. It just goes into Windows.

View 2 Replies View Related

Computer Wont Get Into BIOS To Setup Right?

Aug 13, 2005

Im building this computer and now that I have all the pices Im trying to get it working. My problem is I cant get the bios set up right. I never had to do this befor so I dont really know what to do.

View 1 Replies View Related

Computer Not Entering Into BIOS Setup?

Sep 27, 2010

my pc not go bios setup how to get into the bios?

View 1 Replies View Related

Using Windows Xp / Get BIOS Setup Screen

May 23, 2010

using windows xp how do I get in the BIOS Setup screen

View 1 Replies View Related

Change IRQ Assignments - BIOS Setup

Aug 18, 2005

This article will have Bios and Windows settings that will help free up
resourses on non used devices. Note after going through these steps you may need to "Reset theConfigeration Data"(ECC Data). This will recycle the IRQs and free up the non used ones that might still being reserved by the motherboard.BIOS setup on my Micron Millennia TS doesn't explicitly list a reset configuration. How do I have the computer reassign the IRQ assignments?

View 8 Replies View Related

Pc Hangs At Setup Is Starting

Mar 17, 2007

When I attempt to install XP it is hanging up at "windows is starting windows". It does it with either my XP or 2000 program.

View 1 Replies View Related

Can Open Bios Setup For Xp From Command Prompt

Sep 21, 2007

is there a way i can open the bios setup for xp from the command prompt or is there aanother way

View 1 Replies View Related

Cannot Access Bios Setup On Dell Dimension

Jan 27, 2010

I am trying to access my system setup , So i can boot from my xp cd .I tried to hit F2 but it just keeps taking me to a black screen wanting my pw . I forgot my Pw and after trying to guess my pw to many times it now just shows a black screen wanting a pw ? How can i get pass this ? I have never seen this before .Need a Pw to get to bios setup?I cant boot from my cd unless i get into the bios setup .

View 3 Replies View Related

SP3 Setup Hangs/freezes At 34/35 Minutes

Aug 18, 2010

i am trying to install windows xp service pack 3. but the windows on that kept freezing at the same point, every time it loaded to a state where i couldnt even move the mouse, was working perfectly fine before. i inserted the windows xp sp3 disk, and formatted the hard drive to ntfs (quick) and then the files started to copy, once that was done, it restarted and the actual installation part started. it went from 39 minutes down to 35 minutes and froze on the installing devices part. i thought it was a common error so i restarted the setup. this time it went to 34 minutes and froze. most of the times it would get stuck on 34/35 minutes and either froze or restarted the laptop for no reason. Only once, it went down to 23 minutes and froze. only 2 out of 30 tries went past the install devices section.

View 2 Replies View Related

Setup Is Starting Installation Hangs

Apr 30, 2006

A new 250 gig seagate SATA 7200.8 hard drive and a win xp home upgrade edition. enabled SATA in BIOS, connected SATA cable to SATA1 on mobo, BIOS didn't recognize the drive, connected to SATA2 and BIOS did recognize drive so I tried to partition and format using Seagate's DiscWizard from floppy. Things seemed to go fine until I got a message that format wasn't completed because of some error.I went ahead and tried to install from xp cd, loaded SATA drivers from floppy, cd started loading but then hangs up at "setup is starting windows"I've never used SATA before.

View 7 Replies View Related

Hangs Every Time At Setup Is Starting

May 16, 2010

I'm trying to do a clean install on a laptop and every time I try to install Windows XP Pro, it hangs at the screen that says "Setup is starting Windows" I've also tried installing Windows 2000.

View 8 Replies View Related

Pro Install Hangs At Setup Is Starting

Aug 29, 2008

I am trying to install XP Pro on a machine with an AMD K6 clocked at 266mhz and 160mb of RAM. This is a laptop currently running Windows 98 SE. 98 works fine for me but I hate installing drivers. The laptop is an Compaq Presario 1235. I just want the laptop running XP, it doesn't have to be lightning fast. In setup, it hangs at Setup is Starting Windows. It does the same when installing Win2k.

View 4 Replies View Related

Error: Cant Enter Setup. Video Mode 103 Not Supported By Video Card

Oct 31, 2007

Recently I was playing a game, when my screen froze. I then shut my computer down to restart it, used it a few times (in 4-bit safe mode), then after I shutdown again, I cant log back in... it just freezes and the screen flashes, I cannot boot into my computer setup (default f2) or into safe mode (default f8), however I can run the XP cd and get into the recovery console, is there any way that I can change the boot sequence from the recovery console? The screen is dotted with a bunch of dots up and down the screen in columns, and is in 4-bit video mode.

I have a Dell xps gen 5 with xp home.

the error I get is:

"Error: Cant enter setup. Video Mode 103 not supported by this video card."

View 3 Replies View Related

Install Hangs At Setup Is Inspecting Hardware

Aug 25, 2008

I have used the search facility to try and find a result to this problem but alas to no avail.I have had XP pro in this desktop before so I know it's compatible. Recently I decided to upgrade to Vista but decided that it wasn't for me and have tried to downgrade back to XP.On first try with XP pro setup bootdisk I got by said problem and got to the format/partition bit but got error message saying unable to load operating system half way through install. I figured it could be because i didn't set up boot in bios properly using bootup selector instead and upon restart during install it tried to boot from hd.

So restarted and sorted bios selection out but now get this wierd problem, being on ANY install disk of XP (I have a few) it jams after "setup is inspecting your computers hardware" i.e. blank screen and nothing happening. I've tried unplugging everything and leaving only cd-rom, hard-drive and monitor/keyboard/gfx card and mouse connected but all to no avail.The drive I'm trying to install to is a samsung 150gb hard drive partitioned to 20gb and 130gb respectively with data still on the 130gb section that i'd like to keep.The most interesting thing is that the Vista disk that I have installs fine without problem which is how I'm writing this.

View 4 Replies View Related

Hangs At Setup Is Inspecting Computers Hardware Configuration

May 18, 2010

While trying to install Windows XP, my computer hangs at the “Please wait, setup is inspecting your computer’s hardware configuration” screen. This happens while trying to install either Windows XP Home or Windows XP Pro (both of which are original CDs), as well as a slipstreamed sp3 copy of XP. So I installing XP on an older computer I have and then put that hard drive back into the computer with the trouble, turned the system on and it hangs at either the black screen or at the F8 boot options screen when I press the F8 key.I checked the connections, tried stripping the computer hardware down to just a several year old CD / DVD drive, graphics card, 1 hard drive, and floppy. When that gave the same results, I tried every hardware arrangement I could think of; several different hard drives IDE and SATA (internal) ranging from 40GB’s to 500GB’s, slave / master / cable / select and the wire or port selection, 2 DVD drives (internal / external), together and in combinations for both the hard dives and the DVD drives, pulling out or unplugging all other connections (Ethernet, USB, TV-card, and floppy drive), and changed the placement and number of memory sticks. I also changed the monitors and all of this gave the same results.

I played with various settings of the main board jumpers and from within CMOS. I under clocked and over clocked the memory, CPU, and north bridge as well as changing the voltage, individually and together; manually and automatically. I set the optimized defaults and reset the Bios, both from within the CMOS and pulling the plug or with the jumper. I enabled everything and disabled everything that I could get away with. Even run the boot up Virus scan utility. Some of these would not let the system post properly, however the those that would allow me to post gave my the same system hanging problems with XP.With the exception of adding a couple of hard drives, changing out a DVD drive, adding a couple of USB devices, different OS’s and some CMOS settings; the system is the same as when it used to run XP Pro fine about a little over a year ago. Though I do remember that XP was fussy about starting up with trying to over clock the CPU to anything with the memory running at stock settings and so I was left with having to use the automatic settings (which I used the lite or medium settings). As for the other OS’s, I am currently running Windows 7rc (which runs fine). I’ve ran MSDOS 6.22 (via bootable CD), Ubuntu Linux v10.04, and Mandrake Linux (I believe v6. something). All of these installed and ran fine. However Windows 95, Windows 95 OEM, Windows 98, and the Windows 98 sp2 installation CD’s just went to black screen and froze. On some site sometime ago, I heard that you will sometimes run into conflicts if the north bridge chipset is from an Opposing graphics vendor than the Graphics Card that you are using which is the case in my system, an ATI chipset with an nVidia Video Card. Though I have no idea that is source of my problem or not and the only other video card that my system I think will take is an old Voodoo3 or 4, 3d Card.

View 6 Replies View Related

Try To Install XP Onto A New Hard Drive / Hangs On First Blue Setup Page

Oct 21, 2005

when I try to install XP onto a new hard drive it hangs on the first blue setup page with windows setup showing on the top line and nothing at the bottom to continue with. I updated the BIOS on the original motherboard and have now fitted a new MB but still the problem is the same. Everything was fine before the original drive went down with death rattles.

View 2 Replies View Related

Wont Boot / Enter System Disk And Press Enter

Apr 12, 2005

So I'm having a bit of a nightmare trying to get my copy of XP to boot.Every thing was working fine and then I tried to make a back up image of my drive using Norton Ghost 2003. I have a 200Gb Wester Digital SATA drive and an Asus A8n-SLI mobo. I think that there might have been some problem with the nVidia IDE/SATA drivers as ghost crashed half way thorugh the image making process. Now when I try to boot I get a "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER"

View 4 Replies View Related

Computer Will Not Install / Hangs On "setup Is Starting Windows"

Dec 29, 2005

I am trying to install xp on this good friend of mine's machine that took a dive last week. We replaced the motherboard, cpu, and memory. And afterwords for about 3 days, it seemed to function ok. Then it just quit booting. I told him we would need to reinstall windows. I was kind of shocked we did not have to in the first place. Anyways, So now I am trying to reinstall windows:I can get it to boot from the windows cd, it goes through the standard list of drivers, and at the end says, "setup is starting windows"... Then it just hangs there indefinately. Typically after this, you get to the screen that asks you if you want to install windows, then you hit f8 to agree to there stuff, then you get to partition ect. I mention these things so you will know what part I am talking about.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved