Maintenance :: Optimize Drives Vs Third Party Defrag
Jan 18, 2013Do you use the built-in Windows Optimize Drivers (Disk Defrag) or do you use a third party product?
If third party product, which product and why?
Do you use the built-in Windows Optimize Drivers (Disk Defrag) or do you use a third party product?
If third party product, which product and why?
My SSD (Intel 60GB) was becoming too small to hold my Windows 8 system partition so I found another use for that SSD and went back to HDD. I transferred whole SSD to HDD with Paragon Backup & Recovery 2013 free, and now the system gladly boots from HDD.
But Windows 8 is somehow still thinking that they are running on SSD. For example "Optimize Drives" (Ex Windows Defragmenter) shows "Solid State Drive" as media type and probably because it can't access TRIM functions, it is unable to defragment the drive, so it is yelling that "Optimization is not available":
How do I convince Windows 8 that they are running from HDD again?
I have tried to remove this disk from "Disk Drives" in Device Manager, also I removed/reinstalled everything under "IDE ATA/ATAPI Controllers" and "Storage controllers" without any success.
I keep reading different interpretations on whether Windows 8 does a trim command or defrag using the new "optimization" utility (formally defrag).
View 1 Replies View RelatedI was playing an online game when suddenly I've got a runtime error which froze the screen. I had to push the power button and my laptop restarted, slowly than usually but otherwise O.K. However, when I tried to do the maintenance using the Optimize tool this is what I see now:
The "volumes" (for the lack of a better word) Push Button Reset and ?Volume{9789f0... that have never been showing before are showing now and when I try to force a manual optimization the window just blinks but doesn't do anything. I've had the optimization set to "weekly" but after that I and it changed to "daily" for at least 3 days now but this didn't solve the problem. Highlighting and right-clicking doesn't work.
So I tried to open defrag today for the first time with using Windows 8 and when I click on the application the command prompt opens and closes in about two seconds and then nothing happens.
View 7 Replies View RelatedInstalled 8.1 some 2 weeks ago (give or take).
Now today i wanted to look to my 2 external spindle drives if defrag had run and it did run......BUT also on my Samsung SSD's which i never do myself.
Windows 8 erroneously defrags SSDs, indeed. Doesn't look like it's been fixed in Windows 8.1.
Why Windows 8 defragments your SSD and how you can avoid this.
I Defraged my comp to Optimize. After defrag, my mouse and keyboard no longer worked. I tried restarting, unpluging and switching to a wired mouse and keyboard. I can't get the comp to recognize them. I also switched between back and front ports.
View 4 Replies View RelatedWindows 8, but I've updated my box to Windows 8.1. I have a 250Gb Truecrypt file as my 'Documents stash' which I mount as a separate drive.
On Win 7 I could defrag this but on 8.1 the drive is greyed out not giving me chance to defrag it.
(See attached screenshots from Win 7 HP & 8.1 Core)
I am running Win 8 Pro.
My set up has 2 x 650 GB WD Black hard drives and a Samsung 840 (non pro) for the boot drive.
I have run the latest Samsung Magician, however the BIG problem is that it has stopped the windows 8 Defrag program.
I reinstalled Win 8 and all was OK, (now for the bit about me being thick -- ) I thought I would try the old version of Samsung Magician, and Bu**er me if has not only done the same thing again, turned off defrag and optimize, I am just unable to open defrag in order to defrag my WD drives.
I do not really want to reinstall Windows 8 again unless I have to, so how to switch defrag bag on again.
I tried to upgrade to windows 8 through the store and if failed horribly, the pc refused to boot a an error code I that don't remember so I decided to wipe everything and install Windows 8.1 from a usb drive. Everything was fine for the past week and a half until 2 days ago when the disk defragmentation tool decided to stop working, I ran the tool many times after installing 8.1 and it has always worked but now I get a 0x80070057 error which should mean that the size of my partition is wrong. I did a chkdsk /r /f that took 2 hours to complete and it didn't find any errors and I also ran a sfc /scannow with no luck.
Here is a screenshot
After spending some time googling for the issue I found out that there are many Windows 8.1 users with the same issue and on the microsoft forums no one seems to be able to fix this. From what I understand this seems to be related to the size values of the partition which according to the defragger are wrong but the tool was working before and I didn't edit the partition in any way.
I'm using Windows 8 Home Premium 64 Bit.
My Disk Defragmenter that came with the system will not open. When I try to open it, a CMD windows appears for 1 second and disappears. I have tried opening it in all ways.
I have tried:
Safe Mode
Sfc /Scannow
Chkdsk
Anti Malware scans
I need something like the answer for this question, only a way to do it in Windows 8. His instructions only work on Windows 7.
Disk Defragmenter won't open in Windows 7
im using Windows 8 64bit and every time I try to defrag or optimize it it goes to pass 2.92% and just hangs there for hours before I just give up. also anylize takes forever to complete
View 9 Replies View RelatedWhenever I run defrag this happens:
It goes away after about 0.1 second and I can't read what it says (it goes by to fast)
It seems that Windows 8.1 Pro's scheduled defrag is consolidating free space, which is taking forever on one of my 2 TB data drives, which has about 300 GB free space. I stopped it at about 9%, and dfrgui immediately showed it as "OK (0% fragmented)". Clicking its Optimize button resulted in the defrag phase completing almost immediately, but then it was back to consolidating free space, starting at 5% this time. According to Task Manager, it's read/writing about 40 MB/sec, and the Active Time is over 90%. I really don't want this to go on for hours and hours and potentially repeat itself during future scheduled scans. Is it possible to alter this behavior, or should I just disable the weekly defrag task?
View 7 Replies View RelatedI have this wired volume in my defrag screen after windows 8.1 upgrade what the heck is it here is a picture. Highlighted in blue is the volume ??
View 4 Replies View RelatedI just bought a Seagate ST750LX003 Momentus XT 750 GB as the new primary drive for my gaming laptop, and I'm wondering how to defrag them, and whether it is safe. I wanted the best of both worlds (space and speed) so I went for the middle ground. What is the difference between a regular HDD, SSHD, and a SSD? Do I just let Windows perform its' normal defrag routine as I normally would, or do I need to download some kind of proprietary software from Seagate that will do it? I like to use 3rd party software (UltimateDefrag) for my defrag operations, is all. And how much can I fill it up before it starts to slow down? I ask because I've heard that you cant fill an SSD up past around 50 to 60% or so before it slowly starts to degrade, since it needs room to perform its' TRIM (defrag) operations. Is this also true of SSHDs?
View 5 Replies View RelatedMy five year old HP Pavilion crashed with virtually no signs of life, although the 2 320GB drives are only 8 months old, and are spinning when startup is attempted. No messages of any kind on the display; I checked the display and it is good. Bought a new HP, but it has Windows 8.
All my backup data is via Norton Ghost 15/Windows 7 and is intact on a 1 TB external Passport drive. I need to figure out how to retrieve this data.
A suggestion was made to just install the old Win 7 hard drive in place of the Win 8 hard drive in the new computer. New computer can't accommodate both old Win 7 hard drives, so I stuck the C: in, it per normal containing the startup and OS files. The computer would not boot from this drive, and delivered an error message to the effect "No bootable disk or drive has failed."
So the question is would there be anything in the BIOS of the new PC which would make it expect to see Win 8?? why it wouldn't boot from this drive? I realize the drive could be bad, but given the age of the drive, it seems unlikely...
Is there a way to force any new folder that are created be customized to be 'Optimize this folder for' - General Items no matter the contents (ie video, photos,etc.)?
View 1 Replies View RelatedI have a RAID 0 array consisting of 4x WD Black. Windows lists the array as an SSD in the optimize/defragmenter UI. Both 'Analyze' and 'Optimize' are greyed out and therefore I cannot defragment the array.
For the record I have the latest BIOS for my motherboard (which is an Asus Rampage IV Extreme), latest Intel RST and Windows 8.1 fully updated.
I saw the File History screenshot tutorial.In that tutorial there is an Option 3 -> Point No. 3: To Select a Network or Local Drive Location to Save File History.When I click the select drive button,none of my local drives are showing up.What to do?
View 1 Replies View RelatedI want to use third party DNS servers rather than those of my ISP. However, it takes less than a day for Windows 8 to lose the settings I painstakingly entered (awkward user interface, and long navigation to enter manually).
Can I set the DNS servers using a script, and if so how do I go about this?
Any method to remove the start button in Windows 8.1 without using a third party app? Are there some registry tweaks to do so?
View 6 Replies View RelatedI've reinstalled Win 8 and now even upgrading to 8.1 didn't change anything.
I have Windows 8 and am trying to see streams broadcast on Justin.tv using any browser besides Chrome. I can view streams on JTV using Chrome when I have it's built-in flash player going but if I try to use the one I downloaded it doesn't work and gives me the same issues as Firefox 25 and IE 10 which are a black screen for the stream and a constant loading circle for chat. After a good bit of googling I found out that to see streams on Justin.tv you have to have 3rd party cookies option enabled in flash. When I try to do this with the online settings manager it won't allow me to check to accept 3rd party cookies. Nothing else I've tried has worked such as downgrading browsers in FF's case and trying the current flash version and the beta one. Older versions of flash outside of IE just tell me I need to upgrade.
I've cleaned the cache so many times. The box is not clickable at all. It lights up when I put my arrow over it but it won't allow it to be checked. Also, when I try to change storage settings those settings don't take either.
I've used the uninstaller that's downloadable off of Adobe's site, restarted my computer and tried downloading the most recent Flash version again. I still can't click on these boxes and the changes for storage don't get saved when trying to do so when using Firefox or IE.
I don't know what to do with IE 10 since I have Win 8 and flash is integrated as it is with Chrome. Funny thing is as I mentioned before the only way I can watch Justin.tv feeds is with Chrome and using it's integrated Flash.
Windows 8.1
IE 10
Firefox 25
Chrome 31.0.1650.26 beta-m
I have had installer failure for Hp printer software and windows live mail even though signed in as administrator and running the programs as administrator; the failure is the same for both, that is " failure due to lack of privileges to write to C:program dataMicrosoft windowsstart menu".
I have gone to the files and changed permission from read only several times and had it change right back to read only as soon as I closed explorer.
I have gone into uac and disabled notification but it has no effects, and Windows 8 apps still seem to work anyway' so I reset uac to normal level again.
This all seemed to start after a win update, but doing a system restore has not worked either.
My computer freezes when I right click on Defrag from the search menu. When trying to open it, nothing happens. I am able to get to defrag from the control panel.
View 9 Replies View RelatedI can't find where the defrag App. is on Win8.
View 9 Replies View RelatedI had a Seagate MyBackup 1TB external drive. When it was half full I decided to buy another one, the same Seagate, same model, same 1TB.
So I copied the files to the new one and I do backups every week or so for the changes.
Today I noticed that the old one uses 70GB more than the other.
I mean, 70GB is a lot. I checked the files carefully, it's all my movies. Both are the same capacity, 931 GB. Even same color. The only difference I found is that the newest has 16MB buffer and the old one only 8MB.
Just in case it is relevant, I first used a program called Cobian Backup to make incremental backups and so on, but it was a mess and I uninstalled, formatted the new one and copied the files directly.Maybe Cobian took 70GB of drive #1 and they are now lost in nowhere? I don't detect hidden files, hidden partitions, etc.
In CMD I did I found 4 Diskdrives, and I'm only aware I have 'C' and 'D' on my computer, is this possible malware?
Screenshot by Lightshot
I have Windows 7 on a 120 Gig SSD.
I have Windows 8 on a 150 Gig HDD.
I want to swap the OS's, putting 8 on the SSD, and 7 on the HDD.
So far, I've made Ghost images of both drives, and the system reserved partitions.
I have a boot-able thumbdrive, and multiple ways to make the ghost images available [External HD, Server, large Thumbdrives] so restoring them will not be an issue.
The largest OS uese 89 Gigs, so that is not an issue, and I will redo several installs of software, but that's not important right now.
Are there ANY concerns with doing such a swap?
I'd rather not, but I can change the connections of the SATA cables if I HAD to! The BIOS is pretty advanced, so I don't expect that to be an issue.
Acer Aspire laptop. Host OS : Win 7 Home Premium SP1. Guest OS : Win 8.1 pro preview installed in VMware Player
Win 8.1 does not see my external hard drive or flash drive when I plug them into the USB ports.
How do I correct that?
I have a pc with 4 drives. And I got a new job, working from home and i wanted to make one of the drives just for work. It was one that i had windows 7 one and no longer used after i bought an ssd an put windows 8 on it. I am really liking 8 and so I put 8 on the second drive that had windows 7 on it.
It all worked fine, but when i tried to have two windows 8 drives on the same pc it made the drives unbootable. I had to re install windows on both drives again. I did some reading and i think its the fast boot feature of windows 8 that's causing the issue. I disabled fast boot on both hard drives. And before I plug them both in at the same time. I want to make sure that im not going to loos all my data again.