Maintenance :: Windows 8 Basic Defrag Tool Won't Open
Jul 8, 2014
I'm using Windows 8 Home Premium 64 Bit.
My Disk Defragmenter that came with the system will not open. When I try to open it, a CMD windows appears for 1 second and disappears. I have tried opening it in all ways.
I have tried:
Safe Mode
Sfc /Scannow
Chkdsk
Anti Malware scans
I need something like the answer for this question, only a way to do it in Windows 8. His instructions only work on Windows 7.
I tried to upgrade to windows 8 through the store and if failed horribly, the pc refused to boot a an error code I that don't remember so I decided to wipe everything and install Windows 8.1 from a usb drive. Everything was fine for the past week and a half until 2 days ago when the disk defragmentation tool decided to stop working, I ran the tool many times after installing 8.1 and it has always worked but now I get a 0x80070057 error which should mean that the size of my partition is wrong. I did a chkdsk /r /f that took 2 hours to complete and it didn't find any errors and I also ran a sfc /scannow with no luck.
Here is a screenshot
After spending some time googling for the issue I found out that there are many Windows 8.1 users with the same issue and on the microsoft forums no one seems to be able to fix this. From what I understand this seems to be related to the size values of the partition which according to the defragger are wrong but the tool was working before and I didn't edit the partition in any way.
im using Windows 8 64bit and every time I try to defrag or optimize it it goes to pass 2.92% and just hangs there for hours before I just give up. also anylize takes forever to complete
So I tried to open defrag today for the first time with using Windows 8 and when I click on the application the command prompt opens and closes in about two seconds and then nothing happens.
I Defraged my comp to Optimize. After defrag, my mouse and keyboard no longer worked. I tried restarting, unpluging and switching to a wired mouse and keyboard. I can't get the comp to recognize them. I also switched between back and front ports.
My set up has 2 x 650 GB WD Black hard drives and a Samsung 840 (non pro) for the boot drive.
I have run the latest Samsung Magician, however the BIG problem is that it has stopped the windows 8 Defrag program.
I reinstalled Win 8 and all was OK, (now for the bit about me being thick -- ) I thought I would try the old version of Samsung Magician, and Bu**er me if has not only done the same thing again, turned off defrag and optimize, I am just unable to open defrag in order to defrag my WD drives.
I do not really want to reinstall Windows 8 again unless I have to, so how to switch defrag bag on again.
One of my favorite features of Windows Explorer was that it told me the free disk space in the status bar. Since Windows Vista, you also had the ability to see the free space on hard drives across the network.
Now in Windows 8 you can't even in the least see the free space on the status bar of your own pc, let alone those across the network, and for someone who's constantly moving files across my home network, it's becoming a bit of a hassle.
I don't think there's away to to restore this functionality (already installed the ClassicShell program) so absent of that, is there a free disk space monitoring tool recommended? I'm mainly looking for one that has a system tray function that can tell me the amount of free space I have left, either in percentage form, or megabyte form, or gigabyte form, whatever.
It seems that Windows 8.1 Pro's scheduled defrag is consolidating free space, which is taking forever on one of my 2 TB data drives, which has about 300 GB free space. I stopped it at about 9%, and dfrgui immediately showed it as "OK (0% fragmented)". Clicking its Optimize button resulted in the defrag phase completing almost immediately, but then it was back to consolidating free space, starting at 5% this time. According to Task Manager, it's read/writing about 40 MB/sec, and the Active Time is over 90%. I really don't want this to go on for hours and hours and potentially repeat itself during future scheduled scans. Is it possible to alter this behavior, or should I just disable the weekly defrag task?
I am trying to analyse boot performance using this tool on 8.1 Pro.
Windows Performance Analyzer
I have already updated to the latest version of ADK but after rebooting it fails. I have Windows 6.3.9600 Build 9600 and Performance Recorder version 6.3.9600.16384(winblue_rtm.130821-1623) which I downloaded yesterday from MS.
Can run this on 8.1 or do I have some incorrect version?
After running sfc /scannow some time ago, it found file corruption and eventually I found that the corrupted files were Snipping Tool files and one Calculator file getting corrupted in 8.1 by viewing the sfcdetails.txt file (attached). When I run the sfc command every few days, I find that Snipping Tool files are corrupted again. This started after upgrading from Windows 8 to 8.1. This is very strange. What would cause only a Calculator file and usually Snipping Tool files to keep getting corrupted when there are so many other system files?
I just bought a Seagate ST750LX003 Momentus XT 750 GB as the new primary drive for my gaming laptop, and I'm wondering how to defrag them, and whether it is safe. I wanted the best of both worlds (space and speed) so I went for the middle ground. What is the difference between a regular HDD, SSHD, and a SSD? Do I just let Windows perform its' normal defrag routine as I normally would, or do I need to download some kind of proprietary software from Seagate that will do it? I like to use 3rd party software (UltimateDefrag) for my defrag operations, is all. And how much can I fill it up before it starts to slow down? I ask because I've heard that you cant fill an SSD up past around 50 to 60% or so before it slowly starts to degrade, since it needs room to perform its' TRIM (defrag) operations. Is this also true of SSHDs?
I just upgraded to windows 8 ( i just bought the upgrade from the microsoft website).
After installing the upgrade I noticed that I was missing ALL the Metro Tiles basic ICONS ie: windows app store, internet explorer, mail , maps , messaging , music , news , people , photos , reader , travel , video ETC...
Check the attached JPGs. YOu will notice the empty tiles in the Metro UI. ALSO if i go to Default Programs you will also see that Icons are missing there as well. It's as if windows has no clue where to find the icons or windows never installed them...
I've rebooted a bunch of time. I tried doing a sfc scan ( or whatever the name is). It said it found some corrupt files and fixed them. I rebooted again but still no icons are showing up.
As much as possible, I do not want to do a fresh install or a refresh. I also have no restore points prior because well its always been like this ever since it finished installing.
Clicking the empty tiles work. It starts the application. Problem is I have no clue which tile is what.
How to back into basic disk from dynamic? I try Delete my partition but there is no option for back into basic...
I saw this tutorial in Change a Dynamic Disk Back to a Basic Disk but it doesn't for my windows 8 pro...
To change a dynamic disk back to a basic disk using the Windows interface. Back up all volumes on the disk you want to convert from dynamic to basic.In Disk Management, right-click each volume on the dynamic disk you want to convert to a basic disk, and then click Delete Volume for each volume on the disk.When all volumes on the disk have been deleted, right-click the disk, and then click Convert to Basic Disk.
Additional considerations:
The disk must not have any volumes nor contain any data before you can change it back to a basic disk. If you want to keep your data, back it up or move it to another volume before you convert the disk to a basic disk. Once you change a dynamic disk back to a basic disk, you can create only partitions and logical drives on that disk.
To change a dynamic disk back to a basic disk using a command line.
Back up all volumes on the disk you want to convert from dynamic to basic. Open a command prompt and type diskpart. At the DISKPART prompt, type list disk. Make note of the disk number you want to convert to basic. At the DISKPART prompt, type select disk <disknumber>. At the DISKPART prompt, type detail disk <disknumber>. For each volume on the disk, at the DISKPART prompt, type select volume= <volumenumber> and then type delete volume. At the DISKPART prompt, type select disk <disknumber>. Specify the disk number of the disk that you want to convert to a basic disk.At the DISKPART prompt, type convert basic.
I have only 1 hard drive on my laptop so i cant delete my 'partition c:'
When I try to change my video adapter the only option I get is Microsoft Basic Display Adapter.
I have a Nvidia Geforce Go 7400
Specs:
Operating System: Windows 8 Pro 32-bit System Manufacturer: Dell Inc. System Model: Latitude D820 BIOS: Phoenix ROM BIOS PLUS Version 1.10 A10 Processor: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz (2 CPUs), ~2.2GHz
Just bought Windows 8 from their web page and upgraded my win7.
My problem is that I'm stuck with a hopeless resolution because I can't install any display drivers.
As the headline says : Windows can only find "Microsoft basic display driver". When I try to install Nvidia drivers I get the "installation cannot continue" message.
I seriously doubt that it's hardware fault - it worked perfectly before the update to win 8.
Sometimes in the properties for the screen driver, the chiptype is listed as Nvidia, and sometimes it just says N/A...
Here's what I've done - besides googleing for the past 5 hours...: Updated intel chipset Tried the guide here: How to Fix NVIDIA Driver Update Installer Error - YouTube ---- this got me a little further but as soon as it tries to access my tv the installation dies (the time of a gfx installation where the screen flickers) Removed the windows driver. Uninstalled old nvidia drivers.
I noticed that MS/Intel won't support my Intel 915GMA drivers and in the Windows 8 DP the surfing the web everything looked slightly too big and all the fonts look fuzzy. In the full version of 8 which I now have how is the text rendering on the basic display?
My computer freezes when I right click on Defrag from the search menu. When trying to open it, nothing happens. I am able to get to defrag from the control panel.
How do you open the BIOS in windows 8. It doesn't show up on the boot up screen. I want to enable the Turbo Boost on the CPU which requires getting into the BIOS. Owns Acer Aspire V3-571, how to get into the BIOS.
I bought internal seagate barracuda 3tb, and since I installed it inside my PC, I went to disk management and saw this
Then I made it in one partition and converted it from dynamic and MBR to basic and GPT, then I stored files in it, the problem is, after I installed windows 8 over windows 7 -which is in a separate drive not the seagate. I faced the same problem in the image above, windows couldn't dedicate the hard drive because it's dynamic and MBR. It has my files now. I want to convert it to basic and GPT without losing data because they're very important.
I have Windows 8.1 Enterprise x64, with Update 1. I want to ask you, where can be problem.
CPU --> Intel(R) Core i5 3230M 2,6 - 3,2 ghz GPU --> Intel HD 4000 and nVidia GeForce GT740M 2GB (it switches how it needs) RAM --> 4 GB DDR3 and 1 600 MHz (1,6 GHz) HDD --> 750 gb with 5400 rpm --> (ST750LM022_HN-M750MBB)
I have installed windows like 2 days ago.
Now my questions:
1. Is it normal, when I just boot Windows, right after iccons apear, when I click to open some application, for example internet browser (using chrome) it takes long time? Like 6 seconds? But if I after windows boot wait 10 sec, then its working normally?
2. When I was playing some new games, actually BF4 and I minimized game, the Windows was responding horibly? Opening "My Computer" takes like 8 secs, opening browser takes even more..
I updated to Windows 8.1 last month. It was quite smooth until some issues started 2-4 days ago. I don't remember if I have done something that may cause this, but I'm quite sure that I didn't make any change to the system.
The problem is, even when I am not opening any applications, my fan suddenly blows very strong and makes loud noise. From the CoreTemp utility I notice that CPU usage is 100% and its temperature is much higher than normal. Again, this happens even when I am not opening any applications, and have started the computer hours ago (so it's not starting up).
The most strange thing is that the problem is solved completely when I open task manager. The first thing I see after doing that is task manager itself is taking up ~60-70% CPU, but that number goes down very quickly, and the total CPU usage drops to normal. The temperature shown in CoreTemp drops also and the fan becomes quiet.
Another issue with my current computer is that when I open certain applications (for example, Google Chrome), the process of the application appears in task manager, but in the background. And the application does not show up until 10-20 minutes later.
And when I use Windows Media Player, every song is stucked for ~5 seconds before being played. And there're spikes in the sound.
