Hardware Drivers :: How To Convert Seagate 3tb From Dynamic To Basic
Apr 10, 2013
I bought internal seagate barracuda 3tb, and since I installed it inside my PC, I went to disk management and saw this
Then I made it in one partition and converted it from dynamic and MBR to basic and GPT, then I stored files in it, the problem is, after I installed windows 8 over windows 7 -which is in a separate drive not the seagate. I faced the same problem in the image above, windows couldn't dedicate the hard drive because it's dynamic and MBR. It has my files now. I want to convert it to basic and GPT without losing data because they're very important.
View 5 Replies
ADVERTISEMENT
Aug 13, 2013
How to back into basic disk from dynamic? I try Delete my partition but there is no option for back into basic...
I saw this tutorial in Change a Dynamic Disk Back to a Basic Disk but it doesn't for my windows 8 pro...
To change a dynamic disk back to a basic disk using the Windows interface. Back up all volumes on the disk you want to convert from dynamic to basic.In Disk Management, right-click each volume on the dynamic disk you want to convert to a basic disk, and then click Delete Volume for each volume on the disk.When all volumes on the disk have been deleted, right-click the disk, and then click Convert to Basic Disk.
Additional considerations:
The disk must not have any volumes nor contain any data before you can change it back to a basic disk. If you want to keep your data, back it up or move it to another volume before you convert the disk to a basic disk. Once you change a dynamic disk back to a basic disk, you can create only partitions and logical drives on that disk.
To change a dynamic disk back to a basic disk using a command line.
Back up all volumes on the disk you want to convert from dynamic to basic. Open a command prompt and type diskpart. At the DISKPART prompt, type list disk. Make note of the disk number you want to convert to basic. At the DISKPART prompt, type select disk <disknumber>. At the DISKPART prompt, type detail disk <disknumber>. For each volume on the disk, at the DISKPART prompt, type select volume= <volumenumber> and then type delete volume. At the DISKPART prompt, type select disk <disknumber>. Specify the disk number of the disk that you want to convert to a basic disk.At the DISKPART prompt, type convert basic.
I have only 1 hard drive on my laptop so i cant delete my 'partition c:'
View 9 Replies
View Related
Feb 23, 2014
I have a 1TB backup HDD that is dynamic and full. I have a new HDD that I wish to use to extend this drive.
Is there a way to do this?
View 1 Replies
View Related
May 26, 2014
I had to reinstall windows. I had a raid 0 with 2 drives, when I started widows the drive couldn't be accessed. so the only option was to convert to dynamic disk. I did that but still cant read or change drive letters. I am pretty sure my data is still on it. but how can I read this disk?
right now I am scanning it with easeUS data recovery and it looks like its finding files. any other way to read the drive?
raid was made with the bios
View 1 Replies
View Related
Oct 26, 2013
Every since I updated to Windows 8.1 my seagate external hdd has been randomly turning off and coming back on when I start to use it or open a program again
View 9 Replies
View Related
Oct 21, 2013
I updated to Windows 8.1 a couple of days ago on my desktop. Windows 8 was installed last June. I have a Seagate Free Agent GoFlex external drive connected to the computer for daily backups. Since upgrading to 8.1, this drive has been shutting itself off and then restarting at seeming random times. This event is accompanied by a soft buzz apparently coming from the desktop tower.
View 4 Replies
View Related
Nov 1, 2012
I installed windows 8 in HDD 1tb Seagate. Then I bought Corsair 240 SSD drive and fresh installed everything there. Now if I boot from SSD drive my Seagate won't show up and I have tried other cables I have 5 hard drives in my system. It shows up in boot menu but won't show up in Disk management or anywhere else.
Then I connected it to the USP port and disk shows up no problem. I would like to leave this copy in as a backup so I don't want to delete it. I can boot into these windows but then my Corsair SSD drive won't show up. Whats up here.
View 5 Replies
View Related
Jul 23, 2014
That is, I can allocate it one through drive management but it still doesn't show next switch on in My Computer, so I must go in an allocate it one. Otherwise it works fine. Bit tedious after a while.
Do I have to reformat it completely to regain auto allocation of a letter?
Used to be fine, but not now. A USB 3.0 Toshiba 500 gig external drive (sealed unit) doesn't have this problem.
View 9 Replies
View Related
Dec 1, 2012
I have a 2 TB eSATA drive that contains my backups. This drive has been working well for years and isn't accumulating errors. It was a basic disk until I deleted a partition that I wasn't using any more and expanded the size of the backup partition. That worked fine until yesterday when I was no longer able to access either of the partitions on the drive. Here's the output of the disk manager relating to this drive:
When I use Windows Explorer to access either of the volumes on the drive, I get a message "Z: is not accessible". When I click on Computer, I see both of the volumes on the disk, but there is no information regarding disk space used/available. If I right click on the drive and go Properties/Tools/Error Check, I get a message "The disk check cannot be performed because windows can not access the disk."
However, if I go into Disk Manage, right click on the partition and go to Properties/Tools/Error Check, I can scan the drive! It completes showing that it found the following errors:
Chkdsk was executed in scan mode on a volume snapshot.
Checking file system on Z:
Volume label is Backup_Files.
Stage 1: Examining basic file system structure ...
Stage 2: Examining file name linkage ...
Stage 3: Examining security descriptors ...
Found corrupt security descriptor entry at offset 0x80000 in $Secure <0,0x9>:$SDS ... queued for offline repair.[repeated 50 times]
[code].......
I then get a message that I need to reboot the computer to repair these errors, which I do. According to the event log, it repairs all of the errors, but I'm back at the same place that I was before and a scandisk of the volume shows the same errors.
View 3 Replies
View Related
Mar 21, 2014
"Convert dynamic" is failing and my specific need is that I have to create dynamic disks as part of testing. Whats the command in 8.1 for this??
Or is this unsupported in 8.1??
View 1 Replies
View Related
Sep 15, 2014
I purchased a Seagate 1Tb external drive that came with "Seagate Dashboard" software to manage back-ups. What I would like to do is create 2 500Gb partitions and use my Acronis software to make mirror images of both my desktop and laptop. Is this do-able? Would it be advisable to delete the "Seagate Dashboard"?
View 5 Replies
View Related
Jan 11, 2014
Whenever I go to empty my recycle bin, my external seagate spins up. I looked at the properties and the drive is there listed as primary. I change it to "C" and it eventually defaults back to the external. why is this happening and how can I fix it permanently
View 1 Replies
View Related
Jul 8, 2013
I have a laptop that runs Windows 8 (64 bit), and the hard drive is apparently a dynamic (as opposed to basic) disk. My problem comes when I try to make a backup image of my active drive. I know a lot of backup software has troubles making an image of a dynamic disk. Now after researching, I know that Windows 8 comes with its own imaging tool, "Windows 7 File Recovery". I tried to create a basic partition, and used the file recovery tool to create an image file, but the file would not be saved, maybe because the partition itself is on the same dynamic hard-drive (the error said something about the partition not being large enough etc... even though I made it 40GB).
My question is, is the native system imaging tool of Windows 8 unable to copy a dynamic drive, or is it because I need to save the image file to some place other than the hard drive (maybe a whole bunch of DVDs, since it is an option). The last computer that I own is as old as a dinosaur, so I really did not keep up with all these advancement- I just feel that dynamic format is a beast to work with.
View 3 Replies
View Related
Nov 2, 2012
I noticed that MS/Intel won't support my Intel 915GMA drivers and in the Windows 8 DP the surfing the web everything looked slightly too big and all the fonts look fuzzy. In the full version of 8 which I now have how is the text rendering on the basic display?
View 3 Replies
View Related
Jan 26, 2014
I want to install windows 8 pro on a machine which already has the windows 8.1 as a dual boot.
View 4 Replies
View Related
Oct 26, 2012
I just upgraded to windows 8 ( i just bought the upgrade from the microsoft website).
After installing the upgrade I noticed that I was missing ALL the Metro Tiles basic ICONS ie: windows app store, internet explorer, mail , maps , messaging , music , news , people , photos , reader , travel , video ETC...
Check the attached JPGs. YOu will notice the empty tiles in the Metro UI. ALSO if i go to Default Programs you will also see that Icons are missing there as well. It's as if windows has no clue where to find the icons or windows never installed them...
I've rebooted a bunch of time. I tried doing a sfc scan ( or whatever the name is). It said it found some corrupt files and fixed them. I rebooted again but still no icons are showing up.
As much as possible, I do not want to do a fresh install or a refresh. I also have no restore points prior because well its always been like this ever since it finished installing.
Clicking the empty tiles work. It starts the application. Problem is I have no clue which tile is what.
View 9 Replies
View Related
Jul 8, 2014
I'm using Windows 8 Home Premium 64 Bit.
My Disk Defragmenter that came with the system will not open. When I try to open it, a CMD windows appears for 1 second and disappears. I have tried opening it in all ways.
I have tried:
Safe Mode
Sfc /Scannow
Chkdsk
Anti Malware scans
I need something like the answer for this question, only a way to do it in Windows 8. His instructions only work on Windows 7.
Disk Defragmenter won't open in Windows 7
View 9 Replies
View Related
May 24, 2013
Why do the Metro style apps lack so many basic functions?
I've noticed that the Photo app, for example, doesn't allow you to do much other than view images. No share, no crop, no edit features. Nothing.
News cannot share, copy, etc.
Am I just missing these features?
View 9 Replies
View Related
Feb 1, 2013
I just bought a Seagate ST750LX003 Momentus XT 750 GB as the new primary drive for my gaming laptop, and I'm wondering how to defrag them, and whether it is safe. I wanted the best of both worlds (space and speed) so I went for the middle ground. What is the difference between a regular HDD, SSHD, and a SSD? Do I just let Windows perform its' normal defrag routine as I normally would, or do I need to download some kind of proprietary software from Seagate that will do it? I like to use 3rd party software (UltimateDefrag) for my defrag operations, is all. And how much can I fill it up before it starts to slow down? I ask because I've heard that you cant fill an SSD up past around 50 to 60% or so before it slowly starts to degrade, since it needs room to perform its' TRIM (defrag) operations. Is this also true of SSHDs?
View 5 Replies
View Related
Apr 17, 2013
When I try to change my video adapter the only option I get is Microsoft Basic Display Adapter.
I have a Nvidia Geforce Go 7400
Specs:
Operating System: Windows 8 Pro 32-bit
System Manufacturer: Dell Inc.
System Model: Latitude D820
BIOS: Phoenix ROM BIOS PLUS Version 1.10 A10
Processor: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz (2 CPUs), ~2.2GHz
View 2 Replies
View Related
Oct 26, 2012
Just bought Windows 8 from their web page and upgraded my win7.
My problem is that I'm stuck with a hopeless resolution because I can't install any display drivers.
As the headline says : Windows can only find "Microsoft basic display driver". When I try to install Nvidia drivers I get the "installation cannot continue" message.
I seriously doubt that it's hardware fault - it worked perfectly before the update to win 8.
Sometimes in the properties for the screen driver, the chiptype is listed as Nvidia, and sometimes it just says N/A...
Specs:
Intel core i3Mobile Intel HM55 Express chipsetNVIDIA GeForce GT425M Graphics
Here's what I've done - besides googleing for the past 5 hours...: Updated intel chipset Tried the guide here: How to Fix NVIDIA Driver Update Installer Error - YouTube ---- this got me a little further but as soon as it tries to access my tv the installation dies (the time of a gfx installation where the screen flickers) Removed the windows driver. Uninstalled old nvidia drivers.
View 7 Replies
View Related
Nov 16, 2012
how to change file install.esd in install.wim? (Windows 8 PRO ).
View 9 Replies
View Related
Jan 28, 2014
Software where i can convert any film file that i have downloaded from torrent and convert and then burn onto disc. it has to be for 32 bit
View 3 Replies
View Related
Jul 29, 2014
What does Convert MBR Disk to GPT Disk technically means? What happens in background? Do we lose data in partitions?
View 2 Replies
View Related
Dec 9, 2012
is it possible to convert win 8 home to pro?
View 3 Replies
View Related
Dec 5, 2012
Is there a way to convert a Metro App, to its counterpart in a Desktop App?
For instance, I open the Metro version of Chrome or IE. I open a half dozen sites. Now I want to view them in a Window so I can drag/drop in to say Outlook for an email.
or...
I open Netflix in Metro, and want to make it a window so I can do some work while I watch.
Is there a method to convert between Metro and Desktop?
View 7 Replies
View Related
Feb 2, 2014
Ok I have my prompt saying DISKPART> so how do I get it to run on my f: drive. convert f: to mbr. Where do I tell or input that it is the f: drive..what would be the correct syntax?
View 4 Replies
View Related
May 8, 2014
Any program to convert a pdf file to word or open office ....
View 2 Replies
View Related
Sep 3, 2013
I have an Windows 8 With Media Center Activated since November 2012 and i have not any problem , now i want to upgrade to win8.1 WMC.
This is what I downloaded : "Windows_8.1_EN-US_x64.ISO"
-How to convert Win8.1 rtm to wmc ?
-Upgrade from win8 wmc to win8.1 wmc and preserve the activation ( i have more than 3 PCs i cant include the data files in each .ISO)?
View 9 Replies
View Related
May 13, 2013
(Or how to remove Write Protection from Pendrive). Pendrive doesn't have any write protection lock key on it.
View 1 Replies
View Related
Dec 28, 2012
I have a lot of mp4 music videos that I would like to convert to wav or flac. Recommend the best software for doing this on windows 8?
View 9 Replies
View Related
