How do you open the BIOS in windows 8. It doesn't show up on the boot up screen. I want to enable the Turbo Boost on the CPU which requires getting into the BIOS. Owns Acer Aspire V3-571, how to get into the BIOS.
View 4 Replieswhat settings are required in the UEFI Bios to run recovery USB/ disks or Linux live CDs. It all used to be so simple. The manufacturer seems unaware that it supplies UEFI systems - so I am working blind. Have tried boot CDs and USBs but all have booted straight into Windows to date. I don't wish to change settings I have no understanding of.
I have a Medion /Lenovo desktop with an AMI UEFI Bios (12 July 2012) and Aptio Setup.
The following seem relevant are supplied as enabled in "Bios":
Intel Rapid Startup Technology
Quiet Boot
Boot Select Mode [UEFI]
UEFI Hard Disk BBS Priorities - Boot Option #1 - Windows Boot Manager
Secure Boot - Secure Boot Mode [Standard]
What do these all mean and what effect do they have on how Windows 8 runs and how boot drives run?
I have an Acer Aspire v5-571g(53334g50makk) Ultra Book.
With Windows 8.1 Installed. The current bios in it is completely useless, it does not provide any options for me to alter, not even temperatures of the processor, graphic card etc...
Rherefore I want to know if I can install a different bios to get advanced features?
When I turn the power on, my desktop PC (a Hewlett-Packard) goes into a BIOS startup routine that says "Preparing Automatic Repair" and then "Diagnosing Your PC" which has to finish before it will load Windows or any OS. I've seen it before, and usually it just takes a few seconds. But now it's stopping at the "Diagnosing" message and won't go any further. I turn it off and on, and it does the same thing again. I can get into the BIOS menus and choose other options like booting from another drive, recovery options, etc. but no matter what I choose it starts the BIOS over again and gets hung up on the "Diagnosing" step, so I can't boot ANYTHING.
Any way to bypass or break out of this BIOS startup loop so I can get to Windows?
Can I disable Legacy Support, since it's for older operating systems?
View 4 Replies View RelatedMy system take too long to boot, bios screen remains there, for 5 mints, even more, but screen of OS doesnot come, it comes after several restart.
View 2 Replies View RelatedI'm using Windows 8 Home Premium 64 Bit.
My Disk Defragmenter that came with the system will not open. When I try to open it, a CMD windows appears for 1 second and disappears. I have tried opening it in all ways.
I have tried:
Safe Mode
Sfc /Scannow
Chkdsk
Anti Malware scans
I need something like the answer for this question, only a way to do it in Windows 8. His instructions only work on Windows 7.
Disk Defragmenter won't open in Windows 7
I have Windows 8.1 Enterprise x64, with Update 1. I want to ask you, where can be problem.
CPU --> Intel(R) Core i5 3230M 2,6 - 3,2 ghz
GPU --> Intel HD 4000 and nVidia GeForce GT740M 2GB (it switches how it needs)
RAM --> 4 GB DDR3 and 1 600 MHz (1,6 GHz)
HDD --> 750 gb with 5400 rpm --> (ST750LM022_HN-M750MBB)
I have installed windows like 2 days ago.
Now my questions:
1. Is it normal, when I just boot Windows, right after iccons apear, when I click to open some application, for example internet browser (using chrome) it takes long time? Like 6 seconds? But if I after windows boot wait 10 sec, then its working normally?
2. When I was playing some new games, actually BF4 and I minimized game, the Windows was responding horibly? Opening "My Computer" takes like 8 secs, opening browser takes even more..
Is there any way to open all apps/programs in metro? Dont like the desktop just want metro
View 2 Replies View RelatedI updated to Windows 8.1 last month. It was quite smooth until some issues started 2-4 days ago. I don't remember if I have done something that may cause this, but I'm quite sure that I didn't make any change to the system.
The problem is, even when I am not opening any applications, my fan suddenly blows very strong and makes loud noise. From the CoreTemp utility I notice that CPU usage is 100% and its temperature is much higher than normal.
Again, this happens even when I am not opening any applications, and have started the computer hours ago (so it's not starting up).
The most strange thing is that the problem is solved completely when I open task manager. The first thing I see after doing that is task manager itself is taking up ~60-70% CPU, but that number goes down very quickly, and the total CPU usage drops to normal. The temperature shown in CoreTemp drops also and the fan becomes quiet.
Another issue with my current computer is that when I open certain applications (for example, Google Chrome), the process of the application appears in task manager, but in the background. And the application does not show up until 10-20 minutes later.
And when I use Windows Media Player, every song is stucked for ~5 seconds before being played. And there're spikes in the sound.
I just built a desktop with a sabertooth x79 motherboard, and am running Windows 8.1 pro 64-bit. When I click the UEFI BIOS Firmware live tile via the change PC settings>update and recovery>recovery>etc. my computer reboots normally to Windows and will not open BIOS. I have tried accessing it using the delete and f2 keys, but this does nothing either.
I am up to date in terms of my BIOS, and am definitely running UEFI and not legacy.
Here's what happened. Yesterday in the morning i was on my laptop (windows 8).
When suddenly, it started going really slow. I restarted it and every time i log into my account, i goes a bit slower, but not too much. Then whenever i open Google Chrome or Internet Explorer, the disk space goes straight up to 100% and doesn't go down. I went into safe mode and it didn't go slow then so it must be something else. I also downloaded AVG and scanned my computer but it found no threats. I have made a new account, which goes slow sometimes but is fine most of the time.
When I click on the desktop IE 11 icon, it seems to open to the home page and then immediately I get an error pop-up saying " A problem caused this program to stop working correctly." I've tried turning IE on and off thru the control panel. I tried to download and install IE from microsoft. I stopped all startup programs. I cannot open IE to reset or change security. I even tried to repair the Windows 8.1 installation. I also have no IE tile to try to open.
View 1 Replies View RelatedRunning Windows 8 Pro x64 as a Domain User with full Admin privileges, I am unable to use File History. I cannot open/start the File History tool. When I attempt to click on it from the Control Panel, nothing happens. When I try running it from the Metro search tool, it switches to the desktop and nothing loads. I've also tried in the Action Center, under Maintenance, "File History is Off. Turn On." Clicking "Turn On" does nothing.
All other items under the Control Panel that I have tried open and work with no problems.
I also tried in a "clean boot". System file checker reported no errors.
I just noticed in Control Panel there is "Windows 7 File Recovery". If I launch that and try to set up a Windows 7-style backup, it seems to work. I suppose I could just use this older tool instead of the new File History, although I haven't researched the differences.
I have another machine with the same version of Windows 8, and I am able to launch File History with no problems. I click File History from control panel and am taken to another screen that allows me to enable it. No such screen on the problem machine. The only main difference is the working machine is a regular user account; whereas, the non working machine is a domain account
in Windows-8 when i try to delete folder i got the message:
"The action cant be completed because the folder or file in it is open in another program"
i check and close all program, i dont see it in the task-manager(if i reset the computer, and try again it will delete it) Windows-8, when i copy, or delete folder - i cant see the action until i press F5 for refresh
I can't open the mounted image in the disk management console. This is my backup image from my previous win 8.1 pro x64 system. Its stored on a external hdd w/ bit locker protection. My problem is I want to recover some files from the previous image but when I mount the vdhx image, the "Open", when i right click on the partition on the disk mgt console, is greyed out. I also noticed that no drive letter is assigned after i mounted it. I have tried converting it to vhd using Hyper-V, then opening it in win 7 but the same thing happens. It gets mounted, but no letter assigned and still can not be opened in the explorer. Are there 3rd-party tools to open & mount vhdx files?
View 3 Replies View RelatedI recently purchased an Asus N56VJ with Windows 8 pre-installed. At first I was trying to downgrade to Windows 7, but could not get past the windows splash screen trying to do a clean install . Anyway, while I was trying to figure out how to install windows 7, I was messing around in the bios. I decided to just stick with the Windows 8, but my bios is screwed up. I do not have any boot configuration options anymore. I tried to flash my bios, but the bios was still the same. I did a full reset on my machine, and still no change in the bios. Is there any way to get my bios options back to the factory settings with all the options?
View 4 Replies View Relatedboth Win 8.1 Pro 64 bit machines. When my intent is to go to a system restore point, from System Properties and then click on System Restore it takes slightly more than 2 minutes for the Restore dialog window to open. This is from the Desktop which I use almost exclusively.
This is an update from Windows 8, which behaved the same, and has had a repair install to see if that would work. It didn't. I have tried your Shadow copy entries mentioned earlier but with no improvement. I have resorted to a third party program "RestorePointCreator.exe" Which works quickly like Win 7 does.
My dual booted Win 7 Pro opens almost by the time my finger releases the mouse button
I'm trying to keep the windows 8 start screen open on one screen and have the other open to the desktop, but any time I click an app on the desktop the 2nd screen with the Windows 8 start screen minimizes. Is there any way to change this behavior?
View 3 Replies View RelatedI have upgraded my windows 8 to 8.1 and now no apps will work and the pc settings wont open also I have activated windows but still wont work
View 14 Replies View RelatedI created a vhd file and cant put it in the recycle bin because every time I try it says Cant open file because it is open in System, I try again but it doesn't work. I've just lost 400gb of disk space!
View 9 Replies View RelatedWhere I can download an 8.0 iso. My product key is contained within the bios.
View 6 Replies View RelatedI was installing nvidia gfx card update today when my computer crashed. When I went and restarted it and tried signing in I get preparing windows forever and nothing seems to happen.
So I held shift and pressed restart to get to the troubleshoot/bios menu and then click troubleshoot when I click anything in there such as restart in safe mode or open cmd in order to run a scandisk my computer seems to crash and go to a black screen but the blue light indicating power on my computer stays on.
My OS is installed on a ocz ssd and the only thing I can think of is that my harddrive died.
[URL]
Applied new SSD to Laptop but can't use the Product key as I don't know what it is as it's in the BIOS. Key is needed for Windows defender to function.
View 9 Replies View RelatedI have a question about the looks of my BIOS startup screen. I have a relatively new ASUS laptop and i instaled windows 8 on it as soon as possible because ASUS had a free upgrade action.
Everything went well but what i noticed is that when i boot up and the BIOS runs i get in stead of the windows 8 logo with the loading-circle the ASUS logo with the logo circle. Its not annoying or something but i just want the windows logo because i think its nicer.
My friend said it had to do with a BIOS or boot configuration with a ASUS fancy patch switched on.
Ans yes ive already tried replacing my bootres.dll file but it wont give me permission to rename the old bootres file and the new file does not contain the windows logo.
After a thorough search, I didn't find anyway possible to embed a key inside BIOS just like the OEM manufacturers do. The case scenario is quite simple:
Using NoOS(Ubuntu/Dos) laptops that also get marketed with pre-installed Windows 8.X. Purchase bulk OEM, and prepare the laptop to work with exactly the same setup (e.g. UEFI BIOS embedded Windows key) as if it was purchased pre-installed.
I have a pretty new computer. Just a few months old. It is supposed to be a good one.
Dell XPS 8500
Quad core i7 processor
lots of memory and extras
This computer also has the 64 bit edition of Windows 8 installed on it. Windows 8 is driving me up the wall!!! I have had numerous problems with it since day 1.
As recently as a few days ago, my system was running reasonably okay. Then I downloaded a driver for my network card from the dell.com website. From that point on, I cannot get my computer to boot up properly. I have turned my computer off and on multiple times in hopes that it would correct whatever is wrong.
When I first turn my PC on, it will stay stuck at the Dell logo window for a while.
Sometimes it will make it past that and it will give me an error message that says:
"error sending end of post message to ME, system HALT!"
Also, I sometimes get a message which says:
"the last USB device you connected to the computer malfunctioned, and Windows did not recognize it.
Try reconnecting the device. If windows still does not recognize it, your device may not be working properly."
This is insanity. I have NOT connected any new USB devices to my computer.
I do not know what to do. I figured that the easiest thing might be to try simply reinstalling Windows 8 from scratch. So I inserted my Windows 8 reinstall disk that Dell sent me when I bought this thing. However, my computer will not boot from this disk. So I guess I am stuck.
I just received my new Dell Inspiron 15R-5520 64 bit laptop running Windows 8. It came with a new BIOS that supports both UEFI and Legacy. Compared to the BIOS on my old Dell Inspiron laptop it seems very insecure. I'm referring to access to the boot order. In my old BIOS I could set a password which was necessary for changing the boot order and either enabling or disabling devices within the boot list. Thus one could select the HDD and disable all other devices such as CD/DVD and Flashdrives. The new BIOS includes passwords as well, but they don't restrict access to the boot order and there doesn't seem to be any way to disable devices from the boot list. In the case that my laptop is stolen it's nice to prevent the thief from quickly booting off a CD or flashdrive and accessing all my files, etc. why the new BIOS removed this seemingly important security feature?
View 9 Replies View RelatedI have windows 7 already installed.my hard disk have 3 partitions and there are data in them.so,if i want to install windows 8.1 with uefi do I need to format all my partitions or only the windows 7 installed partition?
View 2 Replies View RelatedI have an error message at boot time that says [fail] twice then boots normally.
I have tracked it down in other posts to the bios which I change and it works for awhile but then mysteriously changes itself back.
Here is what I do.
F2 at Dell logo
move tab to "boot"
Reorder the boot order to the following:
Windows Boot Manager
UEFI Onboard LAN IPv4
UEFI Onboard LAN IPv6
then save and exit
machine reboots without error message
Runs/boots fine for awhile then message reappears.
Going back into BIOS shows Windows Boot Manager has moved to the bottom of the list again.
Repeating the fix is only temporary.
How can I set up the BIOS to stay where I put it?
I have a Dell running Win 8.1
I just bought a new Lenovo G580 that came with Windows 8 on it and I can't get into the BIOS settings in order to change the boot order....
View 9 Replies View Related