I created a vhd file and cant put it in the recycle bin because every time I try it says Cant open file because it is open in System, I try again but it doesn't work. I've just lost 400gb of disk space!
How to make the 'Libraries' folder structure appear when doing a file open file save. In both case I can see the folders labeled Desktop, Documents, Downloads, etc. but I cannot see the Libraries folder.
I'm trying to keep the windows 8 start screen open on one screen and have the other open to the desktop, but any time I click an app on the desktop the 2nd screen with the Windows 8 start screen minimizes. Is there any way to change this behavior?
I have a program that used to run on win 7, but 8 wont let me open the file. I've tried the Program Compatibility Troubleshooter with no luck. After I select an O.S., it asks me to test the program. I click the option and it does nothing.
I've noticed a problem over last few days.. I'm not able to open applications like task manager, registry editor etc.. I get the error message stating that "The service cannot accept control messages at this time".. What to do?
in Windows-8 when i try to delete folder i got the message: "The action cant be completed because the folder or file in it is open in another program" i check and close all program, i dont see it in the task-manager (if i reset the computer, and try again it will delete it)
another problem in Windows-8, when i copy, or delete folder - i cant see the action until i press F5 for refresh
Running Windows 8 Pro x64 as a Domain User with full Admin privileges, I am unable to use File History. I cannot open/start the File History tool. When I attempt to click on it from the Control Panel, nothing happens. When I try running it from the Metro search tool, it switches to the desktop and nothing loads. I've also tried in the Action Center, under Maintenance, "File History is Off. Turn On." Clicking "Turn On" does nothing.
All other items under the Control Panel that I have tried open and work with no problems.
I also tried in a "clean boot". System file checker reported no errors.
I just noticed in Control Panel there is "Windows 7 File Recovery". If I launch that and try to set up a Windows 7-style backup, it seems to work. I suppose I could just use this older tool instead of the new File History, although I haven't researched the differences.
I have another machine with the same version of Windows 8, and I am able to launch File History with no problems. I click File History from control panel and am taken to another screen that allows me to enable it. No such screen on the problem machine. The only main difference is the working machine is a regular user account; whereas, the non working machine is a domain account
How do you want to open this type of file (.psd)?I'm choosing more options and picking photoshop as the default app, but nothing is happening. The same things happens to .torrent files, only works if i have the program open and drags the file into the program.
Files it happens with: .psd .torrent .mobi And the files are blank.
in Windows-8 when i try to delete folder i got the message:
"The action cant be completed because the folder or file in it is open in another program"
i check and close all program, i dont see it in the task-manager(if i reset the computer, and try again it will delete it) Windows-8, when i copy, or delete folder - i cant see the action until i press F5 for refresh
I want to have an icon(shortcut) on my start screen that opens a rom file with the emulator with just one click. Is that possible? This way I could have every single game(rom) on the start screen to choose from instead of going to desktop, open the emulator and select(search ) the rom.
Windows Explorer as well as other desktop programs failed to respond to a right click from any interface. I was also having printer errors that involved total failure to print. At first, I thought I needed to uninstall all my Epson software and printer, but that resulted in no change. This was likely a Context Menu Handler problem. It suggested downloading a Shell File Extensions View (ShellExView - Shell Extension Manager For Windows) from NirSoft version 184.108.40.206 which was free.
The first download I did not use out of fear so I accessed the Context Menu area via regedit, but saw no way to disable any suspected third party Context Menu Handlers. So, in the end, I swallowed hard and ran the NirSoft application. I was able to see all the shell items in the registry, and sorted them by age, the most recent was a Context Menu Handler from Norton Internet Security occurring during the most recent update.
The manager software allowed me to disable just that one handler, and after a restart, File Explorer and everything else behaved normally. So, now I am posting this so it only takes you less than an hour to address this issue, where I spent 4-5 hours on it. I reinstalled the Norton Internet Security and all is still well.
I have a very frustrating issue with Windows 8 where my software disappears when I select to open an existing file from within the parent program. It is not minimized and it is not 'off' the screen. I open task manager, and it doesn't exist as a process in any state. The program is Xilinx's ISE for programming FPGA boards.
Before, I get the obvious response that it is an issue with the ISE gui and not Windows 8, I've had a similar problem in another program in Windows 8 in which when I tried to create a new folder in a select file dialog box to save a file, the program would disappear. (Though, I don't recall which program that was.) It's as the program closes completely! (I'm lovin' Linux even more now.)
Word documents open, but I can't delete, move, or open anything like pictures and media.
It says the file is damaged, windows can't read it, or it's corrupted.
I can't move any programs/stuff to a new folder, or the screen flashes dark blue then back again, with nothing changed
If I delete something, again, blue screen flash, nothing changes. If I delete something while editing a picture (ex: selecting part of the picture then pressing "delete" key), nothing happens (Paint.NET - doubt this issue is from them).
My temp folder is extremely messed up as well. Link to my temp folder [URL] ....
I am running Excel 2007 and have been working on files and ONLY saving them to my USB memory stick.
On connecting the device to my PC (using an extension USB cord) I noticed a very brief minute blue like spark, and didn'y release until I tried to access my files that the entire content was wiped.
Excel cannot open the file 'LostFile_XLSX_608879.xlsx' because the file format or file extension is not valid. Verify that the file has not been corrupted and that the file extension matches the format of the file.
Well I think it looks fine to me, and I endeavoureed to use the Open & Repair when openng the file too, with no luck.
We got a new computer in the office and it is running Windows 8.1. We also have 2 older computers and they are running win XP. I have them all networked together and everybody can see and edit all files on any computer.So far so good.Here is the problem: MS Access will not open any database files. I get the attached popup. The file is not outside my intranet. It resides in a subfolder of "Documents". The folder is called "Data Base Files". As I said, the file can be seen by anu user, but can only be opened in the Windows 8.1 machine, where it resides. Q: how can I open the file on the XP machines? Of cause they all have Access installed. How do I get around the popup?
both Win 8.1 Pro 64 bit machines. When my intent is to go to a system restore point, from System Properties and then click on System Restore it takes slightly more than 2 minutes for the Restore dialog window to open. This is from the Desktop which I use almost exclusively.
This is an update from Windows 8, which behaved the same, and has had a repair install to see if that would work. It didn't. I have tried your Shadow copy entries mentioned earlier but with no improvement. I have resorted to a third party program "RestorePointCreator.exe" Which works quickly like Win 7 does.
My dual booted Win 7 Pro opens almost by the time my finger releases the mouse button
I am unable to open any apps but the store and when I tried to uninstall and reinstall some apps I was met by an 0x80070002 error. It's not serious because I can use the apps on other users, but it would still be nice to have it fixed. I really don't feel like resetting my system.
I just downloaded windows 8 prof from my msdn, and I made a bootable usb stick with WintoFlash and now when I am trying to install I get this message: Windows cannot open the required file D:/Sources/install.wim. The file may be corrupt or missing. Make sure all files required for installation are available, Error code: 0x80070570. I have looked into the usb stick but install.wim is just there. And I did a disk chek in wintoflash and it found this:
Found problems with source files.
Can't find file D:sourcesoot.wim
Can't find file D:sourcesidwbinfo.txt
Can't find file D:ootmgr
Can't find folder D:oot
Can't find file D:sourcesinstall.wim or file D:sourcesinstall.swm
I'm on 64 bit and have 8.1 Pro installed. When I double click a file reader does not open. This wasn't the case before the upgrade. Tried multiple times but it just doesn't open. Went to Task Manager and noticed 8 instances of Acrobat Reader and shut them down all one by one. The files started opening again. After a while again I have to go back to the task manager and close reader which is cumbersome and irritating.