Program Disappears When Select To Open Existing File
Sep 30, 2013
I have a very frustrating issue with Windows 8 where my software disappears when I select to open an existing file from within the parent program. It is not minimized and it is not 'off' the screen. I open task manager, and it doesn't exist as a process in any state. The program is Xilinx's ISE for programming FPGA boards.
Before, I get the obvious response that it is an issue with the ISE gui and not Windows 8, I've had a similar problem in another program in Windows 8 in which when I tried to create a new folder in a select file dialog box to save a file, the program would disappear. (Though, I don't recall which program that was.) It's as the program closes completely! (I'm lovin' Linux even more now.)
in Windows-8 when i try to delete folder i got the message: "The action cant be completed because the folder or file in it is open in another program" i check and close all program, i dont see it in the task-manager (if i reset the computer, and try again it will delete it)
another problem in Windows-8, when i copy, or delete folder - i cant see the action until i press F5 for refresh
How to make Windows 8 open pdf file with the message "how do you want to open this file?" Because I want to choose according to what program to use to open a file.
in Windows-8 when i try to delete folder i got the message:
"The action cant be completed because the folder or file in it is open in another program"
i check and close all program, i dont see it in the task-manager(if i reset the computer, and try again it will delete it) Windows-8, when i copy, or delete folder - i cant see the action until i press F5 for refresh
I updated to Windows 8.1 last month. It was quite smooth until some issues started 2-4 days ago. I don't remember if I have done something that may cause this, but I'm quite sure that I didn't make any change to the system.
The problem is, even when I am not opening any applications, my fan suddenly blows very strong and makes loud noise. From the CoreTemp utility I notice that CPU usage is 100% and its temperature is much higher than normal. Again, this happens even when I am not opening any applications, and have started the computer hours ago (so it's not starting up).
The most strange thing is that the problem is solved completely when I open task manager. The first thing I see after doing that is task manager itself is taking up ~60-70% CPU, but that number goes down very quickly, and the total CPU usage drops to normal. The temperature shown in CoreTemp drops also and the fan becomes quiet.
Another issue with my current computer is that when I open certain applications (for example, Google Chrome), the process of the application appears in task manager, but in the background. And the application does not show up until 10-20 minutes later.
And when I use Windows Media Player, every song is stucked for ~5 seconds before being played. And there're spikes in the sound.
Is there any way to take the icon from one file and use it for another? For example, if I create a "File Explorer" shortcut to a PDF file so I can pin it to the taskbar or start screen, I'd like to remove the File Explorer icon from it and use the PDF icon that Adobe Reader uses. But I don't think it's included in the icon files available.
I've been getting errors everytime that I open a program (ANY and EVERY program). When booted into safe mode I'm not getting any errors. Here's some pictures of me opening google chrome, skype, and Windows Media Player.
It seems to be the exact same error for all of them and the only program that DOESNT seem to give me the error is paint. As soon as I click "ok", the program opens like normal but this is incredibly annoying.
This error started immediately after I installed Windows 8 from Windows 7, I might add.
I've just uninstalled RealPlayer on Windows 8, but I am unable to remove the link from the list after clicking "Choose default program" from "Open with". I've already gone through this: Open with - Clean Up and Remove Programs - Windows 7 Forums, but it still wouldn't work. How to remove it?
I have been using a program called Family Tree Legends for years now, but just recently when I try to open the program I receive the following message: "This program has been damaged, possibly by a bad sector of the hard drive or a virus. Please reinstall it." I have removed the program and reinstalled it several times and it still won't work. It's a family tree program that I used almost daily and now I'm concerned I lost everything. I even tried to open the program via the administrator function but it still won't work.
How to make the 'Libraries' folder structure appear when doing a file open file save. In both case I can see the folders labeled Desktop, Documents, Downloads, etc. but I cannot see the Libraries folder.
I have Windows 8.1 and on my desktop are several PNG files and shortcuts. When I double click on any of them the program that opens is Directory Opus (I use this instead of Windows Explorer). I checked the defaults and it is NOT Directory Opus.
brand new computer, i installed my normal program (office 2013, vs.net 2013, sql developer 2014, stardock start 8 and some other basic stuff etc)
i have this computer and google chrome pinned to the task bar.
if i left click either of them, they take 10+ seconds to open. I can run either from a short cut on the desktop or anywhere else and they both open instantly.
i can fix this behavior by right clicking the task bar and clicking lock the task bar. now both chrome and this computer open instantly for about 1 min. eventually they both go back to 10 seconds. i can then right click and do unlock the task bar and it fixes it for a min etc.
i think it might have something to do with office. i'm going to try to uninstall that and reinstall and see if it works. the little pop up messages in the upper right corner for "you have an email" are also very slow when i click on it to open the email in outlook.
I was wondering how I could go about removing items from the Open With menu without having to download any programs for it. Here's a screenshot of what I'm talking about. I would like to remove Photos/Paint as I never use those 2 items.
I have a windows 8.1 64 bit PC with a program called 1stPage.exe installed.
When I right click a .txt file I get 'Edit with 1st Page' in the context menu and it also shows in the open with menu.
However HTML files do not show these options. I have checked the registry and it would appear that the program is set up on the open with menu exactly the same for both file types.
So it would appear that something is blocking 1stPage from showing against HTML files but I can't figure out what I need to change.
The thing is, i open java files with Eclipse by default. Today i wanted to take some notes about Java the programming language which include text and code. I used Notepad++, and with it you can save the file as a wide variety of types, among them java file. I chose this, but since they are associated with eclipse, it makes opening them with Notepad++ tedious. I want to ask if there is a way to set the default program for some java files Notepad++ and leave Eclipse for the rest? This would be a useful feature for few other types too.
I created a vhd file and cant put it in the recycle bin because every time I try it says Cant open file because it is open in System, I try again but it doesn't work. I've just lost 400gb of disk space!
I want to make windows to stop open SRT files Using notepad. I do not want windows to be able to open SRT files I wish it will be unkonwn file and be unattach to any program. How can I do that?
I've had this problem for awhile, finding strange but not necessarily harmful files, and wondering which program created them, so I can determine if they're safe to delete. I would have to install a program that monitors/records all files written to the HDD. Unless there is another way.
I have Adodbe Photoshop Elements installed on my Windows 8 PC. I am trying to upload some new actions to PSE and am being told to copy them into the Adobe file in the Programdata file. I cant find it anywhere.
I have clicked on the view/show hidden folders and still no luck.
I have third party software that uses text files that have an extension of .mc. The originally were not set to open with any program. I accidentally set it so that a program called N1MM is now set to be the default.
How do I restore the register so that .mc files are not associated with any program?
I recently found many application would not save to correct type. Some software icons would come out to a blank or white block, but those software actually there. For example, realrecorder is running, it would come out a white block on taskbar on bottom. I tried use 'access and program default' in control panel, still not fix the issue. Ms word, and word pad also come out white blank icon.
I have a Lenovo laptop running Windows 8.1. I run a number of VB6 programs. One is an estimating system that makes use of .dat files. When I first install the program and the files, everything works fine.
The problem comes when I 'over-write' a .dat file with a newer version, with some basic cost changes (the file updated on a different computer which contains VB6). As I 'paste' from a USB stick it asks if I want to over-write, which I obviously agree to.
However, as I run the program, I still appear to be using data from the previous file! The latest update figures are ignored.
To check this out further, I have even deleted (removed completely) the .dat file from the appropriate directory, but when running the program it still inputs data from the original file.
This leads me to believe there must be another copy of the file open somewhere (hence the phantom!), possibly as a 'last used' reference.
I have been on to the taskbar and ensured I have unchecked the two boxes about retaining files etc.
I have two networked PCs. On PC1, I have a program file (.exe) that I want PC2 to be able to access, open and use, but not copy or move from it's location. What would be the best permission settings to adjust on PC1 to protect the file?
I recently found many application would not save to correct type. Some software icons would come out to a blank or white block, but those software actually there. For example, realrecorder is running, it would come out a white block on taskbar on bottom. I tried use 'access and program default' in control panel, still not fix the issue. Ms word, and word pad also come out white blank icon.
I almost filled the hard disk C and would like to install other applications that discharge in the second harddisk D (microSDHC), wanting to make a symbolic link to the folder c program file windowsapp how can I do then to keep all permissions? using the function "Robocopy"?
