Is there any way to take the icon from one file and use it for another? For example, if I create a "File Explorer" shortcut to a PDF file so I can pin it to the taskbar or start screen, I'd like to remove the File Explorer icon from it and use the PDF icon that Adobe Reader uses. But I don't think it's included in the icon files available.
View 9 RepliesI have a very frustrating issue with Windows 8 where my software disappears when I select to open an existing file from within the parent program. It is not minimized and it is not 'off' the screen. I open task manager, and it doesn't exist as a process in any state. The program is Xilinx's ISE for programming FPGA boards.
Before, I get the obvious response that it is an issue with the ISE gui and not Windows 8, I've had a similar problem in another program in Windows 8 in which when I tried to create a new folder in a select file dialog box to save a file, the program would disappear. (Though, I don't recall which program that was.) It's as the program closes completely! (I'm lovin' Linux even more now.)
When in file explorer the zip icon under the share tab is not active. When I click on a simple folder, it does not highlight. If I right click on the folder and go to send to all I get is the dvd drive unless I shift right click first then a drop down of more selections appear but not send to compress. Is this something that need to be activated. I can un-zip a fle from the view tab.
View 4 Replies View RelatedI am trying to figure out how i can change the cover art/icon for my DVD movies (mkv) so they dont all have the same default icon. I would like to change the icon to like a DVD cover for each movie so its easy to look through them and find the movie you want, not to mention it looks so much better.
View 2 Replies View RelatedI need to extract the icon from 8.1 WMC "RecordedTV" located at "C:UsersPublicLibraries". How to do this?
View 4 Replies View RelatedI quite often place files on my Windows 8 desktop while im working on various stuff and have a problem with icons I cant fix, for example: I have a number of PDF files currently on my desktop and my pdf program is foxit. I DONT WANT TO CHANGE THE PROGRAM ICON, just the icons of the files it makes. I had the same issue on win7 and i know I can change folder view options to "show icons and not thumbnails" but unfortunately that screws up my image icons.
In windows 7, "types" and "nirsoft files type manager" allowed you to change the file type icon from the thumbnail to whatever icon you wanted. These 2 progs plus another I've tried don't work in win 8pro?
When I right-click on a metro tile in windows 8, the Open File Location Icon does not show on my task bar. What is wrong?
View 3 Replies View RelatedI had refresh my win 8 but after that I cant see the Bluetooth file transfer wizard in my start screen. How I can create a icon in my start screen?
View 1 Replies View RelatedI have a relatively new installation of windows 8 with just a few programs installed. Problem is my new SSD is smaller than the existing drive. Using the tutorials on this site, can I just shrink the volume of my existing HDD partition before creating the image to recover from?
View 9 Replies View RelatedFor example there is:
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftABCEFG]
"HIJ"=hex(7):25,00,77,00,69,00,6E,00,64,00,69,00,72,00,
25,00,5C,00,73,00,79,00,73,00,74,00,65,00,6D,00,33 ,00,32,00,5C,00,77,00,
62,00,65,00,6D,00,5C,00,63,00,69,00,6D,00,77,00,69 ,00,6E,00,33,00,32,00,
2E,00,6D,00,6F,00,66,00,00,00,00,00
And I want append (without overwritting) there more data (green below) and remove some data (red above) to have:
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftABCEFG]
"HIJ"=hex(7):25,00,77,00,69,00,6E,00,64,00,69,00,72,00,
25,00,5C,00,73,00,79,00,73,00,74,00,65,00,6D,00,33 ,00,32,00,5C,00,77,00,
62,00,65,00,6D,00,5C,00,63,00,69,00,6D,00,77,00,69 ,00,6E,00,33,00,32,00,
2E,00,6D,00,6F,00,66,00,00,00,25,00,77,00,69,00,6E,00,64,00,69,00,72,00,
25,00,5C,00,73,00,79,00,73,00,74,00,65,00,6D,00,33 ,00,32,00,5C,00,77,00,
62,00,65,00,6D,00,5C,00,6E,00,63,00,70,00,72,00,6F ,00,76,00,2E,00,6D,00,
6F,00,66,00,00,00,00,00
Is it possible by some batch, script, command line...? (Please note, that two 0 values in red has to be deleted from the original string 1st.)
I notice a short flicker from desktop icons when you press the "win+d" short cut. Sometimes some application windows also flicker when you use this short cut.
I guess the reason is some kind of refresh for the icons, actually it seems to be the same behaviour when you use the context menu on the desktop (right mouse click) and use the command "refresh".
It can easily be seen when you are on the desktop with all it's icons and have a small window open and then press win+d a couple of times. The Icons refresh and therefore flicker. That should be smoothed out.I notice this behaviour in Windows 8, Win7, XP.
This is no problem with a similar command in OSX or Ubuntu.
I have a home network set up by geeksquad. They have set up a filesharing where the public drive is on my only PC with a Vista Operating sys. They have a WORKGROUP called WORKGROUP. I connect everything else wirelessly. Have 2 Windows 7 Home laptops connected. A shared printer is also connected.
I now have a new laptop with Windows 8 and just want to add it in. I named the Homegroup WORKGROUP and I can see the other computers when I click on network, but I can't access them. When I click on the other computers especially the Vista PC with the public drive, it asks for a network user ID and password. I tried everything I can think of and it keeps telling me password invalid.
So my new laptopwith Windows 8 has yet to be added to the filesharing and printer sharing.
I just purchased a Lenovo laptop / Win 8.
I changed the Workgroup name to match my existing XP workgroup. Win 8 found the new workgroup, connected to it and changed the workgroup name. However, I cannot access the shared discs or printers.
I got an excellent deal on an SSD (it's hard to beat free ;D ). It's incredibly small is the only problem, however. Only 32GB's. Anyways I installed windows on it, and before I've even entered the setup, I went back into the install CD, open command prompt and robocopied the Users and Program Files (x86) to my 2TB HDD. But now I have a problem...
In windows 7 you could have easily moved the 'Program Files' and 'ProgramData' directories over to another HDD and it would have worked just fine. However, the metro protection crap on Windows 8 forbids you from doing this... Well I mean you could, but it would result in no windows updates (updates will always fail) and Metro apps will fail to start and will not install. So I HAVE to keep the existing files inside the program files/programdata located on the boot drive.
If I had a larger SSD, this wouldn't really be a problem, however because mine is so small, there no room for any new information on that drive once windows is installed. However, I still want to receive updates and use metro apps. So my question is...
how to keep existing files on a partition, but then create a link to a different Volumw that any new directories will be written to?
If I upgrade to Windows 8.1, will it delete all my programs/files/etc.?
View 1 Replies View RelatedI just received an Asus Zenbook with 8 preinstalled.
It was configured with static IP and my office configuration, I would like to split the existing partition, create a new primary partition and clone the Win 8 installation in the new one.
Then set up a dual boot configuration, so I can have a clean "office config" and an "home config" with the same licenses and software in which I can mess with the configuration and setup my home stuff (DLNA server, access to home headless server, software to flash android handset, etc).
I am running into a problem with newly upgraded windows 8 computers not being able to register DNS with our existing domain controller that is currently on server 2003.
I am getting the following error: The system failed to register host (A or AAAA) resource records (RRs) for network adapter with settings:
Adapter Name : {0D2F7524-B997-4850-BE6E-50B502FE46A8}
Host Name : ########
Primary Domain Suffix : #####.#######.com
DNS server list :
172.29.1.10, 172.29.1.12
Sent update to server : <?>
IP Address(es) :
172.29.5.145
The reason the system could not register these RRs was because of a security related problem. The cause of this could be (a) your computer does not have permissions to register and update the specific DNS domain name set for this adapter, or (b) there might have been a problem negotiating valid credentials with the DNS server during the processing of the update request.
You can manually retry DNS registration of the network adapter and its settings by typing 'ipconfig /registerdns' at the command prompt. If problems still persist, contact your DNS server or network systems administrator. See event details for specific error code information.
I blanked out the computer name and domain name.
I built a large desktop system a few years back and it's been upgraded with various bits and pieces including an SSD boot drive. I'm looking at putting together a much smaller system in a Shuttle XH61V and I want to use my existing 2.5" SSD. Can I just put the SSD in and clean install Win 8 from the original system builder disk I bought or will something go wrong because there's already an installation on the drive?
View 7 Replies View RelatedI've had a home network with a Windosw7 PC, sometimes a windows 7 laptop, an Imac, and 2 Mac Powerbooks. I never did anything special to set up a network, I just connected them all to the router. I also have a network printer, a Cannon, which they all print to.
I added a new Windows 8 computer and during the set up process added the printer connection. After doing that, none of the other computers could print to the printer, they all got a "printer offline message. So I deleted it from the Windows 8 profile and it worked for the others again.
Is there a way to set up the printer for the windows 8 computer without cutting off the others?
Also, I'd like to homeshare the two windows 7 and the windows 8 computers, is there a way to do that and have networking still with the MAC computers - I'm particularly concerned with the printer. We don't really need to share files between the macs and pcs.
I have a new Asus X102BA it has modest performance so as I have a spare OCZ 120GB ssd I thought I would see if it could be improved. I have tried to install win 8 Pro using a powered DVD drive but I get the message in my title. The primary partition is shown on screen and I have nothing but the DVD drive plugged into the computer...
View 5 Replies View RelatedI presently have a ethernet system to my computer. Getting a laptop that has a wireless adapter. Can I just add a wireless router to the ethernet instead of my new laptop?
View 3 Replies View RelatedI am about to upgrade another PC (about 4 months old) currently running Windows 7 64bit. The PC is set up so that although the PC has the OS and programs on the SSD (C drive), all other data and info is on the 2Tb hard drive. Their is only a single user with no password and the PC was setup (configured) so that the user profile knows to put that user info and data on the 2Tb hard drive.
I want to do a clean install and am happy to clear everything on the C drive (SSD) and the hard drive. When installing Windows 8 from the ISO image on a DVD, how do I create the similar situation that I had for user profile when running Windows 7?
Also is it possible to be able to boot up straight in to the user without having to enter a password, as I can currently do on the Windows 7 boot?
I have just upgraded an older Windows Vista PC to Windows 8 Pro through a clean install and that went perfectly, but only had a single 1Tb hard drive (C drive).
I seem to be going round in circles trying to reconnect a working Windows 8 laptop to the WiFi after upgrading to 8.1
It refused to recognise the existing and working WiFi upon reboot after upgrade.
I have twice ran the 'netsh wlan delete profile name=[profile name]' command to remove the profile, rebooted the machine, re-added the profile, nothing happens.
The network symbol in the system tray when clicked doesn't show the profile I created, so I can't select it to connect to (though I set it to auto connect?), it just shows 'Hidden Network' , but when clicking this and I enter the SSID and WPA2 key, it just errors with a failed to connect message.
This was working fine, that's how I downloaded the update, now it's broken!
Because it does not contain enough free space. Clearly I have enough free space... [URL] ....
What should I do? I want to do a dual boot, so I can keep Windows 7 in case I don't like 8.1...
I formatted and deleted that partition and I tried again with 201gb, and no luck. [URL] ....
I can only run apps when NOT connected to the internet. Only pre installed apps becauce I can't download new ones. When connected to the internet I can use a browser, use email and go to the apps store. If I try to run any apps they try to open up and then I get the message "Can't log into Xbox" or something like that. I DON'T HAVE AN XBOX. Why do microsoft assume everyone owns all of their products. I have uninstalled everything mention of Xbox but this get the same problem.
I tried to download an app - three days later it was still trying. I just get a blank square on the home screen with some dots scrolling along the bottom of the box. I have tried various apps and nothing ever downloads.
The attrib +s +h command that is used to make a file a system and hidden file is no longer working. When i try to use the command on a folder, the folder just shows up as a normal hidden folder which can be easily viewed using show hidden items in view option. It looks as if every system file is not recognizing itself as a system file.
Also every folder in my system has appeared a desktop.ini and thumbs.db folder.
I am running Windows 8- 64 bit
How to make the 'Libraries' folder structure appear when doing a file open file save. In both case I can see the folders labeled Desktop, Documents, Downloads, etc. but I cannot see the Libraries folder.
Is this possible? How?
I don't know how I did it but I got both Windows 7 File Recovery and Windows 8 File History active at the same time. I upgraded from Win 7 to 8 Pro and transferred settings so win 7 file recovery was already active, when I tried to turn on win 8 file recovery I got a message saying I cant because win 7 FR was active. So I deactivated win 7 FR then activated win 8 FR, for giggles I went back and turned on win 7 FR and it worked. Now I have both active, from what I have read this was not possible. Did I break my OS or am I just lucky?
View 3 Replies View RelatedIn Windows 8.0 File History, it had the nasty habit of duplicating your library files on your backup ( in my case, my external USB backup drive ( Replica 2 Terabyte ). By DUPLICATING, I mean they get copied over and over and over again... This happens to ALL of them, even though you have not touched the majority of them for YEARS. (File History is suppose to copy them over the FIRST time, then copy a new copy with a new name (old name plus date) if you edit the file in any way). I turned of file indexing on ALL my drives, except my C: drive, to see if that would stop it ( this is recommended in many threads on other sites ).
View 1 Replies View RelatedI have an issue running a program that is contained in a self extracting zip that is supposed to run automatically.
The SFX files unzips the contents to a folder on my hard disk (no problem), but then tries to run another program (installer.exe) that is located in the extracted folder.
The program fromm inside the SFX runs fine if I set the compatibility to XP manually, but the problem is that the the SFX extracts the files to a different location each time it is run.
Is there a global way to make a program (installer.exe) run in compatibility mode wherever it exists?
I have been trying to add a .exe file to my Startup files. But for some reason the file does not run at the start up.Take a look at the screenshot to see the setup. cW8oETE.png
The paths which I did use are:
C:UsersDyonAppDataRoamingMicrosoftWindowsSt art MenuProgramsStartup
C:ProgramDataMicrosoftWindowsStart MenuProgramsStartup
Is there another way to add files to the Windows 8.1 Startup files? I have done some research on Google but did not find anything.I have also tried adding a key to the register which did not work either.For the registery I have used both using the direct .exe and the .lnk file. wYMGhdU.png